MacBook :: Replaced Hard Drive With A Larger - Can't Load OS?
Jul 22, 2009
iBook, G4 12", 1.2 GHz
This old unit needed a bigger hard drive, so a friend gave me a Hitachi 60 GB drive he didn't need and I installed it. He told me that it was formatted for MS-DOS and that I would need to reformat it for Mac OS. I'm pretty sure that I did accomplish that using Disk Utilities in the Installer program.
I put a OS 10.4 install disk in and tried to boot from it. My problem is I'm getting a screen alert that says, "This software cannot be loaded on this computer." I can either restart (what good is that?) or go to "Startup Disk" where I choose the install disk (or Network Startup) and click on Restart. Then I choose English as the main language and bang! - right back to the wonderful, "This software cannot be loaded on this computer."
I made a mockup of what the MBP 13" would be like if Apple ditched the superdrive, used a bigger battery, and added a dedicated GPU:
(actual) 2010 MBP 13"
(mockup) 2011 MBP 13"
I figure the larger battery would add another 5 hours to the current 10 hour battery life, totaling about 15 hours, although that could change with the addition of the more powerful GPU.
I plan to upgrade my hard drive from 320 gb to 750 gb. I have a macbook pro 13 inch laptop which I purchased last October. Can I just do a fresh install of osx lion on the new hard drive? Do you guys recommend hard drives from Western Digital or Samsung?
I have purchase a new hard drive for my MacBook Pro Intel 2 Core duo and know how to do it, but once it is installed in the machine, I want to know how to install the operating system. The computer now is almost empty (only a few photos I have backed up) so there is no need to transfer any data. Do I just use the discs that came with it? Please tell me how I restore the system with this new hard drive.
I'm thinking about getting a bigger internal HD for my 15 inch macbook pro. Currently 250GB, want 750gb. I have Macbook Pro 15 inch unibody A1286. Will it fit? And will there be more heat coming from a larger drive? If so is it advisable to avoid a larger drive because of heat issues?
Last week the hard drive crashed (or so I assumed) on my late 2009 13" Mac-book Pro.I was getting the blinking folder icon at startup. After trying to boot in safe mode and several other start-up options, I booted from an OSX install disk and found that the drive wasn't appearing in the Disk Utility - this, and the fact that I had been running it at very high capacity for far too long is what led me to assume it was utterly dead.So I ordered a new drive, a WD Scorpio Blue 500GB, and installed it today. Again booting from the OSX install disk, I went to the disk utility (thinking I would format the drive before installing the OS), but new drive wasn't there either.Assuming I installed the new drive correctly (it was pretty straightforward), this is leading me to assume that I was wrong with my diagnosis.
It's running the drive, but nothing happens. Replaced hard drive and laptop will not boot up. I've changed it before so I know I've installed it correctly.
I just replaced my hard drive today. I booted it up and went to disk utilities to format it and all of that. When I finished I went to restore system from back up and plugged in my external hard drive and the computer said there was no history of back up from Time Machine. This was strange because before I formated the hard drive and tried to restore the information, it recognized that there was back up information. I decided I would re-install the os and try again.
About a week ago, my MacBook Pro started freezing and getting the spinning wheel. When this happens, the computer is unresponsive. So, I will turn it off and on reboot, but all I get is the question mark folder. The weird thing is that sometime it will boot right up, but sometimes it wont. Even when it does boot, it only works for about 5 minutes, and then the spinning wheel occurs again. So, I bought a new hard drive, installed it and reinstalled the operating system.
I have a Mac Book Pro core duo with a partition running windowsXP pro. The hard drive is almost completely full. I want to replace the drive with a larger drive and clone the current drive. Is there a way to completely clone the drive complete with the partition, boot camp, windows etc? I'm running mac os 10.4.11
On Sunday night I found my macbook pro ("13, mid 2010, refurbished) in a frozen state a few seconds after waking it from sleep. So I did a forced restart and then my macbook wouldn't boot (blinking question mark folder). I troubleshooted with the OSX Install DVD on my own before taking it to the Genius Bar (disk utility & TDM could not find the hard drive), and we both came to the conclusion that I should install a new drive. So yesterday I bought a new drive, did a fresh OSX install and managed to migrate all of my info from my presumed damaged drive to the new one. Everything went smoothly and the computer was in working order all night. That is until this morning when I shut it down before bringing it to work. On my lunch break I decided to fire up my newly upgraded macbook only to find that it once again would not boot, still with the blinking question mark folder. I also tested to see if I have faulty RAM and it doesn't look like it (unless both sticks are fried).
I have an early-2008 iMac with 2.66GHz processor, 4 Gig RAM and a 500Gig Hard Drive. Can I increase Hard Drive size in any way? I also have a 500Gig Time Capsule for my backups..
Info: iMac (20-inch Early 2008), Mac OS X (10.7.3)
I have a power mac G5 2.7 that is 2.5 years old. It came configured with two 400GB drives inside as it will only hold two. I now really want to change them out to either two 750 GB or preferably two 1TB drives. Apple, however, has told me it won't work and that my unit will not handle this huge additional power consumption. I have called mac mall and they say no way as well. OWC says they have many working like that and its never been a problem. Then I called Apple again and they said it will work fine. I have 6 more months of Apple care, but either way do not want to blow the interior of this system up. I know I need SATA drives and would ideally like to purchase the Hitachi Deskstar 7K1000.
What I want to do is back up my current Mac mini (160GB hdd) with Time Machine. I then want to upgrade the system drive in the Mac mini to a 320 GB drive and restore from the Time Machine backup with all my programs, settings and files. Will it work even if the back up and restoration drive sizes are different?
How do I reinstall Mac OS X after the hard drive has been replaced? I had an authorized Apple repair facility replace the hard drive on my IMac when the original drive died. I have the Mac OS X Install DVD which says "To start up from Mac OS X, hold down the C key as the computer starts up." I've tried that and all I get is a folder icon with a question mark on it. I'm guessing that's because I don't have the the OS installed to start from. How do I get the OS X installed?
Info: iMac, Mac OS X (10.5.6), dead hard drive replaced
After replacing the first one due to a surprisingly noisy hard drive, and the replacement itself being returned due to having a massive hardware failure, I'm still not using the iMac I ordered over a month ago. Funny thing is, the second iMac had the same rumbling hard drive as the first which I was prepared to put up with. With no more than a few days of usage, it just stopped working. It's been over a week since the second was returned and the new one hasn't been shipped!
I upgraded my hard drive from a 500 GB hard drive to a 1TB hard drive in my MacBook Pro, I reinstalled Lion and restored the data from the other hard drive. Now when I try to login to my account, it's as though my password is incorrect. I'm certain it's correct.
How do I use my Apple ID to reset my password? How do I access my account?
Info: MacBook Pro, Mac OS X (10.7.2), Mid 2010 model
I have a 500GB time capsule that quickly ran out of space with my 27" iMac 1TB drive. I wanted to buy a Guardian MAXimus 1.5TB Raid-1 Hard Drive for $360 to do my backups. The cost was high and I decided to look into replacing the Time Capsule drive. I bought a 2TB Western Digital Green internal drive for $130 and replaced it using the Hardmac instructions. The 2TB Green drive runs near silent and is a lot cooler than the original 500GB drive. The swap was easy to do, but I destroyed the rubber mat glued on the bottom. I bought a Rosewill enclosure for $23 for the 500GB drive. I considered buying a FW800 enclosure, but that was $60 and it didn't seem worth it for a back up drive.
My wife's MacBook no longer recognizes its built-in hard drive. When I do a cold restart it simply gives a folder icon with a question mark. I can boot into an external disk drive (10.5) but Disk Utility and the demo version of Drive Genius does not recognize any internal hard drive.
I just purchased a used MAcBook Air 2,1 however it did not have a hard drive in it. I purchased a Solid State replacement drive (Mercury Aura Pro MBA), however I cannot get it install Snow Leopard (Legal copy with a license). I get all the way through the install (Country, etc), but when it asks me where to install the SSD does not show as an option only the drive that has the DVD in it.
I have a mid-2009 MacBook Pro 17" computer. I bought a 750gb Hitachi drive in an upgrade kit from OWC. I have formatted it and now using Carbon Copy Cloner am making a copy of the internal 500gb drive. I am not very familiar with Mac OS X drive partitions. When Carbon Copy Cloner copies the 500gb partition from my Pro, will it leave the other 250gb or will I need to use Disk Utility or somethng else to format the remaining space? I would like to put the 750gb in the Pro moving the current 500gb into the external housing if possible.
I have a older mac mini and a 6 month old macbook pro, the mini's hard drive is full, can I take the one from the mbp, wipe it, and put it in the mini and get a larger one for the mbp? If so are there any recommendations for a HD larger then 500GB for my mbp?
I just put in a 320gb 7.2K HD to replace my MacBook's 120GB. I'm wondering how to check the load and unload cycles of the new hard drive?
Also, I've got all my stuff on my 120GB drive while the new 320 is in my MacBook with a fresh install of Snow Leopard. I've got a hard drive dock that connects via USB. Can I somehow get all my files off of the 120gb drive without switching the drives out?
I am looking into buying a unibody macbook that has a solid state drive from someone. I was wondering if the drive can be replaced with a SATA drive. It has a 128Gig drive in it and just wanted to know if I had to shell out a boatload of cash to upgrade to a larger drive.
I have a Macbook (about a year and a half old) with 250 G hard drive which is partitioned in half. One half has Mac Os (leopard) and the other bootcamp partition is Windoze xp. I use both equally. I am planning to get a 500-750 G 2.5 inch hard drive and clone my entire hard drive to it so I will have more room (and also a good backup if the need ever arises). Since my drive has BOTH the Mac os and the bootcamp partiton with windoze on it, I need to clone them both over to the new drive. I believe superduper just clones the OS portion and I really don't want to re-install the windows stuff unless i have to! I read that winclone can clone the windoze partitian. SO THIS IS MY PLAN. I AM NOT SURE IF THIS WILL WORK. Is this right? Did I leave anything out? Is there a better way?
1. Get new larger drive and put in a separate powered enclosure 2. Connect to my macbook with usb connector 3. Use superduper to clone the Mac Os to the new drive. 4. Use Winclone to clone the bootcamp (windoze) partition to the new drive 5. Replace the old smaller drive with the new drive.
I think this would work, but am not sure how or when i have to partition the new drive to work with winclone. or does winclone do this automatically?
I have a 1.8 core duo macbook, which previously had a CD-RW drive that stopped reading audio CDs, so I had it replaced under my warranty at John Lewis. It was replaced with a MATSHITA DVD-R UJ-857 and I got it back yesterday, so I was pretty happy that I can now burn DVDs. Only problem is, I just found out that I can't burn CDs with this new drive!
My new Macbook is only 1 week old, so there is not much (or any) useless crap that I don't want or need. The Macbook came with a 160Gb hard drive. Prior to switching to Mac I was a 4-year Linux user. I purchased a new 320Gb drive for my Linux-PC laptop just 2 months ago. I took that drive out and would like to put it in my new Macbook. I would prefer to transfer data from old to new drive rather than starting fresh all over again. So I assume Time Machine is the way to go, and/or use Migration Assistant. My question is how Time Machine works, exactly.
In Linux when you do a backup using Partimage, it backs up byte-for-byte, meaning that if you back up a 100Gb drive, it will restore that same volume size regardless of how much bigger the restore drive is. Put another way, if you buy a 150Gb drive and restore, you will end up with a 100Gb drive with no space left over. I want to avoid this! So how will I backup and restore, and at the end have a 320Gb drive, rather than another 160Gb drive? Will I have to install the OS on the new drive before I restore? And yes, I do have an external hard drive I can back up to, though I haven't used it yet.
Been searching but nothing specifically addressing this issue. I can put in DVD's and music cd's but a blank CD-R is just not recognized. Just had this superdrive replaced 6 weeks ago.
I bought a second hand Mac Book Pro A1150 model. It did not have an optical drive so I bought one, installed it and now my Mac Book will not boot up. When I take the drive out the Mac Book boots up fine. I was told that the optical drive although used was tested and work when it was shipped out. Is it common for a possible defective optical drive to casue a Mac Book pr to not boot up or does this sound like an issue with the optical drive cable, or possibly the logic board?
