MacBook Pro :: Can Power Port Be Replaced

Apr 17, 2012

Mac book pro slipped off bed and broke power plug but also broke power port. Can power port be replaced?

Info:
MacBook Pro

View 3 Replies


ADVERTISEMENT

MacBook - Can The Charger Port Be Replaced

Apr 22, 2012

The last two weeks we have noticed that the charger port is very sensitive, I know our battery needs to be replaced, now we think the port where you plug in the charger needs to be replaced as well. You have to put a lot of pressure on the charger when its plugged in to hold a charge. if not that battery dies within seconds even if it says its at 100%. we have a early 2008 model for the macbook. any idea what we can do? we have elastics holding the charger in place and sometimes thats not even working. (using elastics to push the charger into the port )

Info:
MacBook, Mac OS X (10.7.3)

View 2 Replies View Related

MacBook Pro :: USB Port, Drawing Too Much Power - A USB Devise Is Currently Drawing Too Much Power And The Port Will Be Deactivated

Oct 2, 2006

This is my first post on the forums, although I'm planning on looking around in here once in a while, to see what people are posting.

For starters, I just wanted to tell you about this little problem I've been having with my MacBook 1,83GHz.

Sitting at my desk at work one morning, peacefully drinking my coffee, I suddenly received a rather discomforting error-message from my shiny new (about 1 month old) MacBook;

"A USB devise is currently drawing too much power and the port will be deactivated.".

View 2 Replies View Related

Power Mac :: G4 Doesn't Power On Internal Battery Replaced?

Apr 30, 2012

tried 2 boot up my G4, nothing, replaced internal battery, no status change, advice? would still like to be able to use it if possible and affordable

Info:
G4 dual os boot, Mac OS X (10.4.11), will also boot up in OS 9.2.2 when

View 2 Replies View Related

MacBook Air :: USB Port Enough To Power External Drive?

Feb 16, 2009

I was wondering if the since the MBA's USB port has extra power running through it, if it is able to power a USB drive without a AC adapter.

View 8 Replies View Related

MacBook Pro :: Does Not Power Up After Plug In Phone To USB Port

Sep 2, 2014

Macbook pro does not  power up after plugging in phone into USB Port

Info:
MacBook Pro

View 1 Replies View Related

MacBook Air :: Power Outlet And Port Hatch On The Same Side In MBA?

Nov 3, 2009

256GB SSD-option?- 2.3Ghz (or whaterever it is these days) CPU?- 4GB RAM?- SD-card slot?- Power outlet and port hatch on the _same_ side?I think the last one is especially important on a machine that talks style just as much as essence. It is stupid to hook it up to an external monitor and having cables on both sides. Unclean.The SD-card slot is nice, because it is so much faster than a USB-solution (that be cable, or even the cheap Express-cards found on MBP 17").

View 24 Replies View Related

MacBook Air :: MagSafe Power & Display Port Not On Same Side - Fail

Oct 20, 2010

Failed to fix the cables attached to both sides of the Air problem when connecting to a cinema display. Was this really a difficult fix??

View 11 Replies View Related

MacBook Air :: Low Power USB Port - Not Sufficient For LaCie 250GB Drive

Nov 2, 2008

The USB port of the MacBook Air has very low power and it is not being able to power my LaCie 250GB drive without having the hard drive connected to its independent power source. i am having to plug in not only my computer to external power, but i also have to connect the drive to an independet power source. can someone recommend a drive that works on with the MacBook Air that can work without independent power?

View 6 Replies View Related

MacBook Pro :: Power Down Machine When Plug In Mini Display Port?

Jul 4, 2009

When using the mini display port, do you need to power down the machine to plug it in and un plug it? I assume unplugging it on the fly doesn't mess things up oer the long term. Sorry kind f use to doing things on a windows where sometimes you have shut down the machine to do things.

View 5 Replies View Related

OS X :: USB Port Has Power But No Data - How To Fix It

May 8, 2009

I have just found that the last USB port on my iMac isn't working, it has power as I can charge my iPhone off it, but it has no data as it dosn't see any device plugged in.

View 3 Replies View Related

Power Mac :: Header Port On G5 Ppc

Feb 28, 2012

Where can I find the header port in my g5 ppc dp desktop. Have bought a card reader and it has to be hooked into the "header port"

Info:
Mac OS X (10.6.8)

View 1 Replies View Related

Power Mac G5 :: Ethernet Port Connected To BT Home Hub?

Nov 29, 2007

I have a G5 DP 2.0 and have been using it's built in ethernet port connected straight to my BT home hub (adsl/router) for years. Any way I add into the mix a netgear 1000Base layer 2 switch and the G5's ethernet doesn't work, reconnect straight to the router and all is fine. Now tested with new cables and tested on every port on the switch. By the way the port light on the switch don't light up when G5 attached. Now have tried the switch with a g4 and all is fine on every port and supprisingly I've stuck a PCI card in the G5 and that works as well. Just can't work out why the built in won't work through the switch but will direct.

Information:
G5 + PB G4 + G4
Mac OS X (10.4.10)

View 4 Replies View Related

Power Mac G5 :: USB Port Disappeared When Adding Apple Keyboard

Oct 9, 2007

I'm one of the $200 suckers who bought an iPhone. For my $100 "rebate" I bought the new USB AppleKeyboard. I'm typing on it now. But when I first plugged it into the USB port, I got an error message like this: "The USB port is drawing too much power and it will be disabled." This is the same port the computer's original keyboard was plugged into and it worked fine. Now it's dead. The port is one of two USB ports on the back of my (original) Cinema Display. It's still dead. The AppleKeyboard is plugged into the second USB port now, and it works fine. But I thought I'd alert someone at Apple that this happened. Further, I'd like my USB port back but cannot find anywhere in the help files how to re-enable it. Unless it's fried, of course. But then again, how could the keyboard fry the port?

Information:
Power Mac G5
Mac OS X (10.4.10)
Original 21" Cinema Display, AppleKeyboard

View 3 Replies View Related

Power Mac G5 :: FireWire Port At Front Of Machine Not Working

Dec 26, 2007

The firewire port on the front of my machine is bad. I can't transfer any kind of data using it. The port on the back as well as all USB ports work fine. Would this need a complete motherboard replacement? Would it even be worth doing? Could I build a dual processing machine or buy one cheaper?

Information:
G5
Mac OS X (10.4.4)

View 4 Replies View Related

OS X :: USB Port Drawing Too Much Power - The Device That Is Plugged Into It Will Be Deactivated

Sep 13, 2006

I get this strange message every so often, sometimes more often than other times. It says:

USB port drawing too much power. The device that is plugged into it will be deactivated.

There are only two things plugged into the USB-The keyboard and mouse. When I get this message, the mouse freezes. If I jiggle the mouse cable where it is plugged into the USB, it comes back and everything is fine until this message comes up again.

View 13 Replies View Related

Power Mac G5 :: Good Usb 2.0 Port That Works - Finding Internal Card Not A Usb Hub

Dec 6, 2007

Does anyone have for a good usb 2.0 card I can install on a power mac G5? I am looking for an internal card not a usb hub.

Information:
Power Mac G5
Mac OS X (10.5.1)

View 13 Replies View Related

Power Mac G5 :: PCI Serial RS232 Port Card Installation Options In A System

Nov 11, 2007

I recently purchased a PCI card made by SIIG: CyberSerial PCI 16550 RS232 Serial I/O Card. After I got it I noticed the system requirements only list Windows.For the **** of it I installed it in my Power Mac. The system seems to recognize it in "About This Mac..." as a "Serial Controller". There appear to be serial ports assigned to it: /dev/cu.pci-serial3a.When I try to run a serial terminal program over this port (connected to some known working hardware) I get gibberish. I've checked out the cable and remote hardware on another machine and it works fine.

Information:
Power Mac G5 1.6GHz

View 3 Replies View Related

Power Mac :: Why Can't Hear Music Keyboard When It Is Connected Through The Analog Audio Line-in Port

May 9, 2012

Why can't I hear my music keyboard when it is connected thru the Analog Audio line-in port? Looking at the System Pref. - Sound menu - in-put - Line in Built-in Audio, I can see activity on the input levels when I press the Kawai piano keyboard but no sound is heard. All other sound systems- I-tunes etc are operating properly.

Info:
power mac G5, Mac OS X (10.5.8)

View 1 Replies View Related

Hardware :: Finding Connector/cables For Connecting Battery Direct To MagSafe Power Port

May 4, 2009

I'm considering to get an additional battery for my MBP (Alu Unibody)

Wondering is there a cable/connector for connecting the battery directly to the MagSafe power port?

Only manage to find "FastMac�s TruePower U-Charge", which seems rather useful but it's not available for Unibody MBP YET

View 9 Replies View Related

MacBook Pro :: Remove Ethernet And Mini Display Port And Insert HDMI Port?

Aug 11, 2009

How many of you would like to see a HDMI Port? Why the miniDisplay port? Why not remove ethernet jack and miniDisplay port and replace it with a HDMI port. That way one HDMI cable feeds digital video AND audio. Am I the only one thinking of this?

View 22 Replies View Related

PowerPC :: Connect Power Mac G5 To LED Cinema Display With Mini Display Port?

Oct 8, 2009

As the title says, I need a new monitor for my old G5 as the old monitor for it went bust. Apple does not make the old displays that came with the unit anymore and the only available monitor is the new LED ones ? but they all come with mini display ports

View 3 Replies View Related

MacBook Pro :: Mix USB 2.0 And 3.0 On Same Port Is Whole Port Slowed Down?

Jul 3, 2012

I have just ordered a new MacBook Pro and it does not have enough USB ports for my needs.If I have a USB 3.0 hub and I mix USB 2.0 and USB 3.0 peripherals on it, will the whole hub/computer USB 3.0 port be slowed down to USB 2.0 speeds?I am thinking back to Firewire, if you have Firewire 800 and 400 devices on the same chain, the whole chain slowed to Firewire 400 speeds.I don't think this is the same with USB but wanted some reassurance..

Info:
iMac, Mac OS X (10.7), MacBook Air, Mac Mini

View 7 Replies View Related

MacBook Pro :: Getting Battery Replaced?

Sep 10, 2010

I have a 2009 Macbook Pro, and Apple advertises up to 80% battery capacity up to 1,000 charges. My MBP is down to 75% health after a little more than 500 charges.Would I have any problem getting Apple to swap the battery out for me free of charge?

View 5 Replies View Related

MacBook Pro :: HDD Replaced Now Freezing

May 1, 2012

I have a macbook pro 13 inch purchased in 2009.  My HDD died so I took it to an Apple dealer and they replaced it and upgraded me to 10.6.8, when I took it home I found that some of the applications I had received for free were now missing, and after a few days I was having the same problems with my HDD (folder with ? mark appearing)  so I took it back. They told me that I had a virus?  They then gave me the apps that had been missing and upgraded me again to 10.7.3 however it is still freezing regardless of whether I am on the internet so its not my connection. I also went to open itunes and it told me it could not find a folder and to choose a location.  When I chose Music - itunes - it states I can't and to choose another folder.

Info:MacBookPro, Mac OS X (10.7.3)

View 1 Replies View Related

MacBook Pro :: Not Bootable After Superdrive Replaced

Jan 2, 2011

After I replace my super drive with Hitachi 500G 2.5mm HDD, I can not boot except I hold the option key and manually selecting OS X to boot. I think if I am able to reset HDD as 1st boot device as HDD like modifing BIOS in windows machine, it might help, how I don't know how.

View 1 Replies View Related

MacBook :: CD Drive Replaced, New One Won't Burn CDs?

Jan 9, 2009

I have a 1.8 core duo macbook, which previously had a CD-RW drive that stopped reading audio CDs, so I had it replaced under my warranty at John Lewis. It was replaced with a MATSHITA DVD-R UJ-857 and I got it back yesterday, so I was pretty happy that I can now burn DVDs. Only problem is, I just found out that I can't burn CDs with this new drive!

View 5 Replies View Related

MacBook Air :: Replaced Battery - Only One Cycle Available

Jun 25, 2009

I just got my battery replaced and after a full charge both istat and mac osx shows that there is only one cycle available. I remember that my previous battery used to have at least 60 cycles. Is 1 cycle normal for new batteries or?

View 3 Replies View Related

MacBook Pro :: GPU Timeline - Will The 9400M Be Replaced

Sep 11, 2009

how the graphics cards in the MBPs will evolve over the next 6 - 12 months? Is there a sense that the 9400M will be replaced with something better?

View 15 Replies View Related

OS X :: MacBook Pro Won't Turn On - Replaced Battery

Dec 27, 2009

I just got my MacBook pro returned 4 days ago after the hard drive was replaced because the brightness was on minimum and had to be reboot 15 times so it could be changed. I asked apple to replace my battery because it had 1 minute battery life and it had 47 cycles but they didn't. My mac didn't have enough power to start speakers so I rebooted but my mac went into sleep mode and wouldn't come out. I had to force shut down. I tried turning it on but it wouldn't turn on, I tried taking out battery etc and pressed power button 5 secs but nothing changed.

I live 100 miles away from apple repair. I wrote this on my iPod touch. I took it to apple repair and it turned on. I had been using a 65 watt charging cable for a MacBook, I need a 85 watt charging cable. It was 100 miles away and has been posted to me today. apple told me that a MacBook pro requires 80 watt charging cable, and 65 watt can be bad for the mac and will only work if the battery isn't dead. my battery was dead when I tried to turn it on.

View 16 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved