MacBook :: Hard Drive Not Fitting Into Connector
Mar 13, 2012
I've ever tried to upgrade a hard drive on a 13", 2007, white Intel MacBook.I was following the directions I had found on the internet.I've taken the old drive out, swapped the hard drive plate from the original drive to the new hard drive and tried to push it back into the same slot, but for some reason I can't get it to go all the way back into that slot the drive fits in.Strange enough, it also feels like it's pushing against something rubbery on the inside.It's less than a 1/4 inch from going all the way back in.I've made certain that all the screws are tightened all the way on the drive, but can't figure out why I'm getting resistence when I try to push it in that weeee little bit.I am certain that I have the drive flipped the proper way too, because I took note of how the original drive was oriented and made sure I duplicated that on this new drive.Like I had said before, it feels like there is something rubbery that's in the way, I just can't get to it.So I'm also curious if anyone knows if I were to take off the top cover on the laptop whether that would expose the hard drive so that I could see why it's not fitting into the connector properly.
Info:
MacBook, Mac OS X (10.5.8)
View 2 Replies
ADVERTISEMENT
Dec 14, 2009
I am getting a 2008 Mac Pro and i am trying to get a Solid state drive for it i have two questions.
What is the connector type on a mac pro from 2008 Sata or Sata II
Also would i really notice a big performance increase in getting a SSD for my OS and programs?
View 3 Replies
View Related
Oct 4, 2009
I have a black macbook with 120GB HD and 2GB of RAM running 10.5. My problem is that a little while ago my blackbook dropped about half a foot and I immediately opened it to check if it was okay, as I was scared to death. Until recently everything was working fine...until I decided to put in a DVD. I tried putting it in and it only goes in about 1/3 of the way. Something in the front of the drive is blocking it, which is a problem because I can't push it in all the way. I have applecare until January, but I'm currently residing in Germany for a year, so shipping it to Apple might be a little bit of a problem. I'm including a pic so you can see how far it goes in before it stops.
View 6 Replies
View Related
Feb 22, 2009
I have a spare DVD drive and decided to install it in my Mac Pro.
When I opened up my case I found there was a standard Molex power cable, but the existing DVD drive in there had the above adaptor, with one spare to attach another drive with.
My spare drive has space for SATA cables, that's about it.
Any ideas what adaptor this is?
View 19 Replies
View Related
Jul 2, 2010
I just purchased an ICY DOCK for use with an Intel SSD. I already a have one of these, however the new one seems to have some new revisions. Basically this new one allows me to completely take off the cover. The old one slides forward and up, but the cover does not disconnect. The old one also, when closing, makes sure the SSD is seated correctly into the connector port on the ICY DOCK. The new one does not seem to have this "automatic" feature where when I close it.
View 3 Replies
View Related
Dec 17, 2010
I plugged a projector into my macbook air and after unplugging, the entire desktop will not fit on the screen of the MBA no matter what resolution. I have to drag the cursor to top, bottom or side to see what is not shown. The resolution is set at 1440x990 in display preferences.
View 2 Replies
View Related
Apr 28, 2012
The earbuds that came with my samsung galaxy vibrant don't fit into my Mac. Anyone know of a solution, other than buying another pair of earbuds?
Info:
MacBookPro, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 4, 2008
I have a macbook pro and there is a slot on the left side, I think it's for cards? But no regular cards would fit, what does fit? What kind of things do you plug in there? I have no idea.
View 6 Replies
View Related
Sep 1, 2009
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
View 5 Replies
View Related
Jul 27, 2009
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
View 1 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Sep 9, 2014
Macbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
View 5 Replies
View Related
Jul 14, 2007
can you make this: fit where thisis? fitting g3 motherboard?
View 7 Replies
View Related
Sep 11, 2009
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies
View Related
Nov 27, 2009
So, I've created a slideshow, and want to fit music to it. However, whenever I try to do so, the program insists on lingering on the first slide for a full thirty seconds before going on to the next slide. This shouldn't be necessary to make the music fit - all subsequent slides are at just over 5 seconds, and if all slides were just slightly longer than that, it would easily fit. Even if I delete the last slide, it simply makes the subsequent slide lasts 30 seconds.
View 1 Replies
View Related
May 2, 2010
I'm not sure if I'm phrasing this right. I work on an external monitor connected to my macbook, set to 1920 resolution. I was using Itunes stretched out to fill the whole monitor at that resolution. Upon switching to the macbook, the itunes window is now too large when I switch to the macbook display. I can't even see the bottom right handle that you normally drag to resize the window. Clicking on the + button doesn't help, as it only shrinks Itunes to the mini player. How can I get itunes back to a smaller window size?
View 3 Replies
View Related
May 6, 2012
Any load in to Monitor is not fitting on screen. How can I fix this?
Info:Mac Pro, Mac OS X (10.4.11), Screen not reading/fitting content
View 7 Replies
View Related
Mar 13, 2010
My Kids are using an old iMac G3. When I open the iMac, I recognized, that one of the two pins (?), which holds the cpu-cooler is missed. I don't know the exact name of that, and wonder, where I can buy one to fit the cooler again into the right position. I don't wont to buy another logicboard to exchange the parts.
View 9 Replies
View Related
Feb 11, 2010
I just purchased a mac mini and I hooked up the vga cord, however there are two black bars on the left and right sides of the output (everything else is scaled fine but it looks like it is showing on a tube screen). What resolution/tweaks do i have to make in order to get this to fit my entire screen? I am using the typical VGA adaptor for output from the mac mini to the tv.
View 1 Replies
View Related
Sep 6, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
View 3 Replies
View Related
Oct 2, 2009
I bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
View 7 Replies
View Related
Sep 9, 2009
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
View 7 Replies
View Related
Jun 3, 2012
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
View 2 Replies
View Related
Nov 22, 2006
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies
View Related
Sep 9, 2009
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
View 1 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
Mar 9, 2012
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
View 7 Replies
View Related
Oct 14, 2009
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies
View Related
Aug 3, 2009
I'm having a hard time trying to pin down what type of SATA connector the MBA rev C is using for its storage.
I found this DVnation page that lists 3 possible rev. C MBA ssd upgrades, but it is only mentioned that the connector type is Micro-SATA. Does this mean that the Intel X18 is as of rev C also suitable for the MBA (or any other regular 1.8" SATA ssd or hdd for that matter)?
View 9 Replies
View Related
Feb 19, 2010
Today I connected my macbook pro to my LED Cinema Display and the MagSafe connector's light was blinking like a hard disk's status light. Is this normal?... it's blinking rapidly like when the light of an external HD is showing the disk is in use. Something like that.
I just checked the battery status in iStats and it's giving me a 91% healthe.. . How could that be if this mac is 6 months old.
View 11 Replies
View Related
