MacBook Pro :: Cloning Entire Hard Drive To An External Hard Drive
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
ADVERTISEMENT
Mar 25, 2009
My OS is 10.3.9 and I have my int. Hd cloned to a F/W ext. HD for back up. Normally I re-clone every month or two. Up until now when re cloning I've just thrown the old cloned Ext. HD into the trash, then empty, to make space for the new clone. This system "Seems" to work, as after a RAM crash, when looking for a solution I wiped the int. HD before I found it was a Ram problem. Finally I just replaced the RAM and rebooted from the Ext. HD then re-cloned back to the int HD. And everything is working fine. But now I'm wondering if just throwing the stuff into the trash is "politically correct?" If not, what is the correct procedure.
Pismo G3 10.3.9 // Iomega FireWire Ext. HD (partitioned)
Clone app/ CCC
View 2 Replies
View Related
Sep 19, 2009
On my new MBP I fired and set-up the system, and SL was already installed.
I followed the procedure of cloning my Leopard HD on to a local back-up drive, using CCC, plugged it in to the MBP and booted from the clone.It has booted up without any noticeable issues but when I go to open Disk Utility, or any other program on the cloned disk, I get the '...application X quit unexpectedly' dialogue box
View 15 Replies
View Related
Jun 13, 2012
How can I move my entire itunes library from my macbook pro harddrive to an external Hard Drive?Â
I know apple products are simple, but sometimes I need the simplicity demonstrated to me.
Info:
MacBook Pro, Mac OS X (10.7.4), moving files
View 1 Replies
View Related
May 27, 2012
Can I copy entire folder to external hard drive?
View 1 Replies
View Related
May 16, 2009
I have a Mac Book Pro core duo with a partition running windowsXP pro. The hard drive is almost completely full. I want to replace the drive with a larger drive and clone the current drive. Is there a way to completely clone the drive complete with the partition, boot camp, windows etc? I'm running mac os 10.4.11
View 3 Replies
View Related
Jan 25, 2009
I have a Imac 20 with a small 3.5 hard drive and I have bought a bigger 360 gig 3.5 hard drive to replace the old one. I have the new one in an external case with USB 2.0 right now. Is there some way I can transfer the entire contents of the old hard drive on to the new one and then swap out the old drive with the new drive and not miss a beat?
View 6 Replies
View Related
Jan 1, 2010
sorry if this has been asked; I tried searching.Anyway, I just bought a larger capacity hard drive and am not sure how to copy the stock 160GB 5400RPM one.Do I need to have some sort of connection to the new hard drive?Is there any way to copy it without having to buy some kind of peripheral?I also have an external hard drive.Would my best bet be just backing everything up and just set up the hard drive as new and just restoring everything??
View 5 Replies
View Related
Mar 28, 2012
So my hard drive just broke. Like a fool I accidently dropped it this morning and this means it cant be booted. I've tried everything I could find on reviving the thing but nothing has worked. However, after leaving it on the grey Apple booting screen for a good hour or so it finally managed to get to the desktop but was still going slowly. My macbook is able to boot of my external hard drive and I've checked the RAM and it's fine, which leaves me to believe that it's a problem with the hard drive itself.Â
Now the issue is that my external hard drive is only 160GB and my internal (now broken) one is 500GB with around 300GB of stuff on it (yes I do need it) and I don't want to have to lose it all. So is there any way of getting my currently broken hard drive and putting its data onto a new one? My idea is to take it out, install the new one and use the broken was as an external and do it like that.
View 1 Replies
View Related
May 27, 2012
Do I have to copy each file individually or can I copy an entire folder to external hard drive?
Info:
iPad 2, iOS 5.0.1
View 2 Replies
View Related
Dec 17, 2009
what's the best way of cloning the hard drive? Since I have Snow Leopard, Windows, and Ubuntu on here, I could use Time Machine for SL, WinClone for Windows, and something else for Ubuntu. Is there anything that could make an exact copy of the hard drive (including the partitions)?
View 1 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
Mar 10, 2012
I have an IMac 20 inch 2007 model. I have filled my hard drive up. I would like to clone and replace the hard drive?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Oct 14, 2009
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies
View Related
Dec 23, 2010
I want to do some upgrade things with my macbook and need to know if all is correct.My current internal hd is 80gb. I'm on 10.4.11. I plan on going to Snow Leopard but I want to keep my 10.4.11 system too to use. Almost 2 year old intel macbook.
I have superduper. I just got a new 500gb drive for the macbook. I also got a usb external 2.5" enclosure. I haven't done anything yet.What I want to do.... I want to partition the new hd into two. Probably 120gb to clone my current system on (with some room for growth) and the remainder to do a whole new fresh install + various applications of Snow Leopard.
Firstly, is it OK for me to have two separate OS's to boot from?
Secondly, cloning procedure.... should I take out my current hd and put it into the external enclosure, then put in the new hd, then boot from my former drive via usb and clone it onto the newly installed drive?
OR...put the new drive first into the enclosure, clone my system onto it, then switch out the drives? Does it matter which way?
Thirdly, since I'm not going to be doing any upgrading of my 10.4 system to SL....I'm leaving it intact as is.....and then doing a completely new install of SL....is there anything weird I should look out for. I dunno....my admin account...or not being able to have Logic installed more than once on the same machine...or anything else I should be aware of?
View 1 Replies
View Related
Jul 15, 2009
I have today received my shiny new macbook pro - very excited!I currently have a macbook, and I previously upgraded the hard drive to 320 GB (same as the new Macbook Pro). What I wanted to do was just swap the hard drives - however when I put the macbook hard drive in the macbook pro it didnt boot. Pressing ALT on startup it sees the hard drive but just hangs (doesnt even show the apple sign).I dont have all the application disks so dont really want to start from a fresh install - I was thinking of cloning the disk with super duper, but that probably will have the same effect of swapping the disk!
View 2 Replies
View Related
Mar 1, 2010
I have a 250 GB disk in my MacBook Pro, and I would like to buy a bigger one (500 GB, probably). In my previous experience from the Windows environment, there was an application called Norton Ghost, in which you could easily clone the disk, and when the cloned one was inserted into your PC, the OS could not tell the difference. Is there something similar for the Mac OS X, so that I can replicate my hard drive and thus install the new one in my Macbook without any hassle? I know that Time Machine is a possibility, but after restoring my system through TM once, I found out that after the restore there were some minor additional steps that had to be taken; however, the cloning technique means that you plug your disk and you are ready to go, so this is what I am looking for. I have one more additional question: I currently use a 500 GB external firewire disk for Time Machine. Will its size be sufficient for backing up the new 500 GB drive?
View 7 Replies
View Related
Mar 1, 2012
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
View 3 Replies
View Related
Apr 12, 2012
I need to back up hard drive to an external hard drive. How can I do this automactically?Â
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
View 1 Replies
View Related
Apr 27, 2012
I was trying to do some tasks in Windows 7 in VMWare fusion and it was a little laggy, so I shut down the VM and restarted my mac. It took a little longer to restart than I'm used to, but when it came back on 99% of my main hard drive is now gone. All my bookmarks in safari, user accounts, most preferences are still here but all files are gone. How could this have happened and is there any way it can be reverted without a time machine back up? It's a mid 2010 21" iMac i3 8GB ram with Lion installed all newest updates have been done prior to this happening. I don't even know what to do, so much has been lost.
Info:
iMac, Mac OS X (10.7.3)
View 4 Replies
View Related
Sep 5, 2014
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 3 Replies
View Related
Aug 27, 2010
I have an external hard drive with lots of media files, and now I backed this up to an identical external hard drive. I wanted to use Carbon Copy Cloner to mirror any changes made in the original hard drive, but I have now tried this for the first time, after having moved some files around. Now instead of moving those files on the other hard drive, CCC just copied these files from the original hard drive, something that takes much longer. Is there any program that could do this more intelligently? (moving files on the backup drive instead of copying them over from the original drive again?)
View 4 Replies
View Related
May 13, 2012
Every time I back up to my external drive Time Machine automatically backs up the whole hard drive which is very time consuming. This happens every time I back up. It's supposed to only add new files, not do the whole thing. Haven't changed user name or any of the things mentioned in other discussions that will cause this. Does some setting need to be changed?
Info:
MacBook (13-inch Late 2009), Mac OS X (10.7.3)
View 1 Replies
View Related
May 27, 2012
I have a 500 GB external drive that uses FireWire. Recently Time Machine started deleting several backups to make room for new ones. It now says the oldest backup is May 4th, 2012. I thought this sounded like a problem. When I looked into the details, my iMac now thinks my hard drive has 400GB instead of 500GB.Â
Info:
iMac, Mac OS X (10.7)
View 4 Replies
View Related
Mar 27, 2012
How do I get photos from backup external drive on to my new hard drive on my MacBook
Info:
MacBook, Mac OS X (10.7.3)
View 2 Replies
View Related
May 6, 2012
So around 5 years ago i got the WD-160JB hard disk drive. I want to see all the things i did back then. I want to be able to connect this WD-160JB drive as a external hard drive to my mac.Â
What i am wondering is if you can somehow have a cable or something which links the USB from the MBP to the hard disk.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
Feb 11, 2009
Need some recommendations to doing full image backups of my entire hard drive.I currently use Acronis TrueImage 11 for my PC's but since i have a Macbook, i need to be able to backup both my HFSJ partition (OS X) and my NTFS boot camp partition (Vista).Acronis TI does not read HFSJ partitons and will only backup my NTFS partition.Simply put. I want to have backup images of my entire drive in the event my drive takes a dump.
View 7 Replies
View Related
Sep 1, 2009
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
View 5 Replies
View Related
Jul 27, 2009
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
View 1 Replies
View Related
Sep 9, 2014
Macbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
View 5 Replies
View Related
