I'm having a hard time trying to pin down what type of SATA connector the MBA rev C is using for its storage.
I found this DVnation page that lists 3 possible rev. C MBA ssd upgrades, but it is only mentioned that the connector type is Micro-SATA. Does this mean that the Intel X18 is as of rev C also suitable for the MBA (or any other regular 1.8" SATA ssd or hdd for that matter)?
So I was swapping some hard drives around in my 12-hour old 15" June Unibody MBP and apparently I broke the hard drive cable. More like I tore 3/4s than broke it. Thankfully I was installing a SSD into the optical drive so I'm still up and running, I just don't have the stock HDD in there as a data drive.
I saw something on eBay for around $50 - I'll have to open the MBP back up and see precisely what the cable looks like - I'm wondering if there's a store that'll have the piece I require? I'd prefer to not take it to an Apple store and have them void my warranty because the HDD isn't user-serviceable part.
I have a 13" MacBook Pro 2011, 2.3gHz, 320GB. What connector does it have? And would SATA still work with my laptop? One more question, what are the exact dimensions of the hard disk drive bay in my laptop, the manual only says 2.5".
Info:
MacBook
Pro, Mac OS X (10.7.2)
I have a MacBook Pro with a 128GB solid state. Is this SATA II or SATA III?
View 3 Replies View RelatedIm considering purchasing a higher capacity internal hardrive around the 750Gb/1Tb mark. However my macbook is the early 2008 model, and it seems the majority of hardrives are SATA II, having speeds of 3Gbt, which my mother board may not be capable of (apparently only 1.5Gbt) From researching and reading some reviews of others who have purchased internal drives on Amazon UK, some have had difficulty due to this problem, but have been able to fix the issue with a firmware update reducing SATA II drive speeds to 1.5Gbt.
Questions I have: Do all SATA / SATA II internal hardrives need a firmware update if replacing on to a new computer?(If so, would I need to look for a specific firmware update for the specific drive I intend on buying? And if you're in the knowledge would you mind posting links to these updates?)What is the process of updating the firmware i.e. would I need to put firmware on external usb hardrive 1st, then upload it to macbook after installing new internal drive (if it boots up my OS that is) etc. Would a 'hybrid' (disk+solid state) drive be compatible with a macbook as old as mine?Do I need to update my operating system to OS X Lion first, or can it be done after installing the drive?
my current laptop hardware:
Macbook Pro 15.4" (Early 2008 Model)
Intel Core 2 Duo 2.4Ghz ProcessorGeForce 256Mb 8600M GT Graphical Processor
Intel ICH8_M AHCI 1.5 Gbt MotherboardToshiba MK1655GSXF 160Gb 2.5" Hard DriveOperating System: OS X Leopard 10.5.8
Info:
MacBook Pro, Mac OS X (10.5.8), 15.4" 2.4Ghz (Early 2008 Model)
I'm looking for a new HD to replace the original, now failing Maxtor drive in my G5 tower (1.8 Ghz dual processor, purchased in Aug. 2004), and have just about settled on the Western Digital Caviar SE16 series. It seems there are two types -- SATA and SATA II -- and I'm not sure about how to make a decision on which particular WD model to buy.
Will either type work in my machine? Or would the SATA II have potential compatibility problems? I read somewhere in these forums that someone with a G5 had bought an SATA II drive, and it wouldn't run with his system. (He said he had to reset some jumper switches to reduce the transfer rate of the drive ??, but now I'm told elsewhere that SATA drives don't have jumper switches.
Information:
1.8 DP G5, 1.5 GB RAM w/ Superdrive
Mac OS X (10.3.x)
I have ordered my first Mac, a Mini 2.66Ghz and I will put a Intel X25-M SSD in the machine to speed it up further. I hope I will be pleased with it
However, the question I encountered was whether the sata connection in the Mini is SATA-150 or SATA-300? Does anyone know?
I am now shopping for a new internal HD of MAC G5; previous HD died. I have decided on a Western Digital and was about to order one when I became alarmed by the SATA II listings. Is there a difference between SATA and SATAII that I should be concerned about the comptability? Don't want to get it and find out it doesn't work!
View 3 Replies View RelatedToday I connected my macbook pro to my LED Cinema Display and the MagSafe connector's light was blinking like a hard disk's status light. Is this normal?... it's blinking rapidly like when the light of an external HD is showing the disk is in use. Something like that.
I just checked the battery status in iStats and it's giving me a 91% healthe.. . How could that be if this mac is 6 months old.
I have a late 2008 Macbook Pro 15" with the 2.53 GHz 6MB L2 cache processor and the 512 MB 9600GT. While tearing it down, I accidentally took the entire fan connector of the leftside fan completely off the logic board. I took it to the Apple store, where they said that they wanted $1,500 to buy a new logic board. I have this weird feeling that they are trying to rip me off, and that they could have repaired the fan connector. Does anyone have a method to reattach the connector or something? It doesn't matter if it will void the warranty because it's already expired.
View 4 Replies View RelatedI assume the DVI out on the 2007 MacBook Pro (model identifier 3,1) is a nonstandard DVI and requires a DVI-to-DVI adapter? It looks like a fullsize connector that I could attach with a standard DVI, but I thought I needed a 30.00 adapter, is this true?
View 5 Replies View RelatedI'm thinking about buying one of the Hypermac External Batteries ([URL]) for traveling and such.
They offer their models with either the old Magsafe connector or the new, silver, tubular connector. I would prefer the tubular connector, but I have the old style MBP (non-unibody).
Is the new style connector compatible with the old style MBP?
Im fixing up a macbook, and there was problems with the battery connector. So I pulled it out. But on the LB there were only 9 holes (6 on one side, 3 on the other) and no hole where the 7th ones should be. And on the connector in those spots it was the same thing, but what is even weirder, is that it doesnt even look like the pins were broken off, just that there was nothing there, and on the top it doesnt have any solder on those points. Any ideas what to do and how to do it??? And if you want i can post pictures.
View 3 Replies View RelatedMy power connector strip has broken apart on my iBookG4. In the past, I would put it on, by using a safety pin, to short-circuit it to fire it up. It eventually froze up, I took the battery out and put it back in. Previously, in the past this has worked to get it back on. However, now I cannot get it back on.
View 1 Replies View Relatedi was wondering, how hot is the little magsafe connector on the mac book pro supposed to be. i've heard about issues of them burning so i wanted to make sure of the heat issue. when i touch the sides of it it's pretty hot, hotter than the rest of my machine. is this normal?
View 5 Replies View RelatedDoes anyone think apple should change all the magsafe connectors to be like the ones on the macbook air? I think those look better than the all white ones that ship with the mb and mbp.
View 3 Replies View RelatedI just got my MacBook back from depot and they say they replaced something called a "Connector", which is listed as item number 631-0557. I have no idea what it is but on my sheet it falls under the symptom "Enclosure - Mechanical/Cosmetic Damaged". I had this replaced once before but I don't know what it is.
THe two times it has been replaced both the battery and the top case have been replaced as well. What is it? Anybody know?
I have problem with USB ports on my new 13" MacBook Pro. Right USB connector now stop work.When I connect mouse to right USB connector - nothing happend, USB don't work. On the lest USB connector mouse work fine.When I connect not powered HD to left connector - LED od HD light but not visible on MAC. When I connect HD via power USB HUB to left USB connector it works. Right connector looks dead.In the System profiler I don't see IR Receiver which is connected to right USB HUB.Do you think that is HW or SW problem?
I just bought a new i7 15" MBP a couple days ago to upgrade my old 13" black MB. I noticed that the the magsafe connector that came with it had a different looking tip. I'm not sure if I like it. It seems awkward and I know the "correct" way to put it is the cord away from the USB/FW/etc ports - which requires another "extra" (=P) step rather than the old magsafe that seemed relatively simple since it was tiny and just jutted out from the tip.
View 1 Replies View RelatedI really like the new design of the Magsafe power cord connector. But both designs still put stress on the cord at the connector, if your Macbook is moved. I hope Apple gives the Magsafe a swivel, so the cord can move more freely as the laptop is moved. Am I the only one thinking this would be a good idea?
View 3 Replies View Relatedsome times the screen goes black unexpectedly and if I move the screen it goes back to its noramal condition ! I went to the apple store and they said that it is for the connector of LCD what can I fix this problem ? do you know anything about the technology of this macbook's LCDs ?! can I fix it by myself ?!
View 3 Replies View RelatedExtremely annoying as it drops out of the charger all the time.
The top part actually sticks to the MacBook with the magnet, but the bottom thing just falls out.
Apple in Germany is sending me a replacement, but they had never heard of the issue so I had to send them pics.
Was thinking about accessories for my MBP and I was thinking about the display port. What I want to do is when on vacations plug my MBP into the TV and show the pictures I took. I know Apple used to give them to you for free when you got a new MacBook or MacBook Pro. But since most were wasted, they stopped. So now, if you call Apple Support or whatever, can you get one for free per request? I really don't want to pay $30 for this little cable.
View 11 Replies View RelatedI have a MacBook Air with Lyon OS. I have tried to show information on a LCD using the Mini DisplayPort to VGA Adapter, but i can`t. I only can to show power point presentations but excel, word or another information on those formats can´t be shown.
Info:
MacBook Air, New MacBook Air 13" display
I've ever tried to upgrade a hard drive on a 13", 2007, white Intel MacBook.I was following the directions I had found on the internet.I've taken the old drive out, swapped the hard drive plate from the original drive to the new hard drive and tried to push it back into the same slot, but for some reason I can't get it to go all the way back into that slot the drive fits in.Strange enough, it also feels like it's pushing against something rubbery on the inside.It's less than a 1/4 inch from going all the way back in.I've made certain that all the screws are tightened all the way on the drive, but can't figure out why I'm getting resistence when I try to push it in that weeee little bit.I am certain that I have the drive flipped the proper way too, because I took note of how the original drive was oriented and made sure I duplicated that on this new drive.Like I had said before, it feels like there is something rubbery that's in the way, I just can't get to it.So I'm also curious if anyone knows if I were to take off the top cover on the laptop whether that would expose the hard drive so that I could see why it's not fitting into the connector properly.
Info:
MacBook, Mac OS X (10.5.8)
June 5th to September 19th.....not too bad, considering the laptop has been on the road quite a bit.
I finally lost (seems so, at least ) that little semi-clear plastic cap shaped like a rectangle with rounded edges that covers/protects the connector of the MBP power supply when it's not connected to the computer (and being transported).....at least, that's what I used it for.
I did a quick search and couldn't find any relevant posts, so sorry in advance if this has been addressed.
Does Apple or someone else sell a replacement for such a dinky little thing.....although, frankly, I found it to be quite useful to protect the connector .
I was wondering why one see very few Magsafe adapter clones. Does anyone know if it is because of the Apple MagSafe connector patent?
View 5 Replies View RelatedA few weeks ago, I discovered that when my Mini Displayport to VGA connector was plugged in, I heard a buzz through my speakers. It didnt bother me that much, so I just dealt with it. However, today I was plugging my external speakers in, and when the connector was about half way in.. I started to hear audio that I knew wasnt on my computer. Turns out it was commentary on a college basketball game. I started to listen some more, and discovered that it was 1530am. Seeing as I use just a standard set of 5.1 computer speakers... I found this to be extremely odd, so I figured id share this with everyone.
View 7 Replies View RelatedI tried to re-apply the thermal paste myself but when it came to disconnecting the wire connectors from the logic board, 3 of the connectors came off completely from the logic board or has damaged the pins. (the battery connection, and two for the left fan)
I have a feeling that these three became brittle or weak from the heat that was generated from the laptop (hence i wanted to do the thermal paste mod). Or it's just my stupidity that these broke. But the others came off without a problem.
I recently had a problem where my 13" 3 yr old macbook would just blink off. then it became shorter and shorter until it would not start up. i brought it to apple who told me after inspection that it had liquid damage and the battery connector and logic board needed to be replaced for an astounding 800+ dollars. the book only cost me 1100!! i got the book back (obviously i didnt pay that, i am sane!), i fiddled with it by trying to start with just the battery. no response. with the battery and charger. starts for just seconds. and then with just the charger. walla! starts up and runs like new.
View 3 Replies View Related