I'm running my Mac mini to this [URL]to my LCD TV.
Unless the Mac Mini is turned on or I have unplugged the HDMI cable the Mini I can't turn my TV on... Does anyone know a fix for this?
When I turn on my Mac mini it asks WiFi connection password eveytime.it does not save the password. I tried everything.it is too annoying and my children do not want to use it. Even worse when wakes up from energy saving mode asks both passwords.
Info:
Mac mini, Mac OS X (10.7.3)
I have an Early 2009 Mac Mini with Mini DVI and Mini DisplayPort. And I have two 1080p HDTVs. The Mac Mini is capable of dual display, and I've gotten it to work before, so the issue is not the TV or Mac. And I have tried both Mirroring and No Mirroring.
I got a Mini DisplayPort to HDMI Adapter (#5311) and a Mini-DVI to HDMI Adapter (#4852) both from MonoPrice. And for some reason I can't get the Mac Mini to dual display, it's only one or the other.
Before I had a Mini Displayport Male and USB Male AUDIO to HDMI Female Converting Adapter (#5969) and I got video on both HDTVs, but not audio at the same time b/c one was USB and one was TOSLINK.
I'm not sure why I can't get video on both monitors. Any help?
I need to connect my 09' Mac Mini to my Yamaha RX-V2700 receiver which outputs to my Sony XBR HDTV. I know the mini has both mini-dvi to dvi and mini-dp to dvi or hdmi available via adapters. I was thinking to go with option 1 however I was wondering what is your opinions? Is mini-display port better over mini-dvi or are they the same? Audio will be carried over optical toslink.
Option 1:
Using mini-dvi adapter to dvi: Connect Dvi-Hdmi cable to receiver and output audio with toslink adapter.
Option 2:
Using mini-dp adapter to dvi or hdmi: Connect Dvi-Hdmi cable to receiver and output audio with toslink adapter.
Just curious can use both to drive the 24" LED ACD AND another 2nd monitor via mini dvi?? That would be a dream come true!
View 13 Replies View RelatedI have a Mac mini (intel) which was running happily running a fully updated leopard os, then for no aparent reason the airport would not turn on rendering wifi conections impossible. after hours of hunting for help and finding none i bought snow leopard and did a full install in the hope of retifying the problem. unfortunate the problem is still there, sometimes it says airport card not installed sometimes its there, but whatever it says nothing happens when i try to turn it on i press the turn on button but nothing happens. for fear of the card itsself being faulty i bought a usb wifi dongle, istalled it as per the instructions yet still i cannot get wirelessly on the internet?
Info:
Mac mini, Mac OS X (10.6)
I have a problem with my mini/quicktime setup and i was hoping for some help from you all at macrumors...
Here is the setup
This system is setup for a admissions office in which we have a mac mini set up to a LCD screen that is all mounted on a wall.
we have the mini on timer to come on from 1230-5pm and when the mini comes on, quicktime is set to automatically open and play the admissions video.
Now here is the problem:
when I turn on the LCD every day, the screen is blank but Ican still hear the video, I figured it was in hibernation so i move the mouse and hit the keyboard and nothing. i need to push the power button and hold it for a couple seconds then the movie comes on but the video is choppy.
here are the specs on the mini: 1.25 power pc G4, 512 Ram.
its old but its only function is to play this video...
I have a Mac Mini from 2009. And it stands in my bedroom and is almost always on. So the led light is a bit annoying in front of the Mac Mini. Is there a way to turn this off when it's on?
View 9 Replies View RelatedThere is a gremlin in my system. Voice Over Utility started this morning, and I don't know how. Can I turn it off?
Info:
Mac mini, Mac OS X (10.6.8)
How to turn on the startup chime on my Mac Mini?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.3)
i want to turn my flash drive into ram like on a pc
Info:Mac mini
I just plugged in a 2nd LCD monitor via the thunderbolt connection and used a mini display adapter. I was just wondering how I can turn it off without unplugging it. I googled and came across an app called 'switchX' but I'd rather not install another app.
Info:
Mac mini
Every time I leave my mini alone for more then an our it powers down, how do I turn off this new feature?
Info:
Mac mini, OS X Yosemite (10.10.1)
I am setting up a mac mini for a friend who is an elderly and I need an easier way to turn on a mac mini instead of having him reach down in the bottom and extend his arm all the way into the back of the mini. Is there a remote control somewhere that can be programmed?
View 15 Replies View RelatedI have multiple displays connected via the HDMI port and one to the mini port as well and a theater sound system attached to the headphone jack. How do you turn on sound output to both HDMI and headphone jack. If the headphone jack is plugged in, it always defaults to that device. I am unable to hear the audio at the remote displays without removing the headphone jack.
Info:
Mac mini (Mid 2010), Mac OS X (10.7.3)
I have my 09 mini connected to a Dell E177FP and I have the energy preferences set to turn the display off after 15 minutes. The problem is that the display never turns off. It just sits at the "check signal" screen as if it was not plugged into anything. How can I get the monitor to go into standby mode?
View 6 Replies View RelatedJust got my new 2.8 with 5870. From the start it gave me some trouble getting it to turn on. I kept trying different plugs and such throughout the house and randomly I got it on. It was working good but I noticed that waking it from sleep the machine will click and the sleep light goes out and a red led behind the grill comes on briefly. I try pushing the power button to hear another click and the red led flashes. These problems seem intermittent and sometimes it will sleep fine. Im using 2 acer monitors connected via 2 vga-mini display adaptors.
View 3 Replies View RelatedThe old Mini worked fine with my Westinghouse 24" LCD monitor (HDMI input -connected to Mini via DVI->HDMI cable).The new Mini Server 2010 has HDMI out, so I used a straight-through HDMI cable. The display looks terrible! All of the fonts appear to have a 'shadow' next to them - almost like an old analog VGA with 'interference'.Thinking it could be the cable, I went back to my old Mini's DVI->HDMI cable (and used the new Mini's HDMI->DVI adapter to connect to it). Same results.The Westinghouse monitor's native resolution is 1920x1200. The Mac says that it's configured for 1920x1200.
View 14 Replies View RelatedI do have a copy of the the Mac Mini SL Client software but I don't have another Mac to create the USB restore disc in order to load the client on the Mini Server via usb drive. I don't intend to use the Server Software and don't want to 'activate' the license so I can resell it instead. Can I just use the Server to create the bootable restore disc without 'activating' the Server License and locking it to my serial number? Or is there another way to create the restore disc if you don't have access to another Mac to run disc utility?
Have a new Mac Mini, using an external drive but I can't get it to show up in finder. It's a Lacie 1TB Porsche design HDD, using a USB connection directly into the mini. I tried it at first by connecting to an open usb on my cinema display..no good. Also no good when connected directly into the mini.
Info:
Mac mini, Mac OS X (10.7.3)
My old Mini is in the next room to the wireless DSL modem. It gets one to three max bars, usually two, and it's just through one interior wall. I don't want to spend a bunch of money, I just want to get a little better reception in the next room. I have seen USB wifi antennas advertised. Would that do anything for me? My iBook G4 in the same spot gets full reception no problem.
View 5 Replies View RelatedI have just read a ton of forum posts and want to make sure I am going to buy the right accessories to make my new Mac Mini all it needs to be to run my home theater.1. For 5.1 audio, do I need to buy this product and then just use a standard Optical audio cable to plug into my receiver?2. The new Mac Mini comes with a mini DVI to DVI connector correct? So all I will have to buy is a DVI to HDMI cable?3. Is OWC (other world computing) the best place to buy upgrades for the mac mini? I have looked at the videos on youtube and it seems like something I should be able to do no problem.
View 10 Replies View RelatedIs there an adapter that connects a mini DVI to a mini Display port so I can use one computer as an external monitor?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.6.8)
I don't have one...but want to know is the mac mini has an ethernet connection to hook to my wired rotter?
View 1 Replies View Related One of the drives in our 2009 mac mini server 2009 has died. I have taken apart many minis so have no problem taking it apart to replace, but does anyone know which drive is the primary, "Server HD" drive? Would it be the top drive (first drive you come across during disassembly) or the bottom drive closer to the logic board with the two pads stuck on? Just wondering if anyone knows for sure so I can avoid removing the drive that's still working fine.
Also, to keep the server running in the mean time, I am booting to the second drive which is working fine. Just curious, once the dead primary drive is replaced , can I simply use carbon copy clone to copy back from the 2nd drive, or will I need to install snow leopard server back onto the new drive?
I have a Mini Media center that I installed Front Row onto. When I updated to 10.4.11 I found that Front Row was broken and I finally figured out how to get it going again. I'm posting this simply for the spreading of knowledge. What you'll need:
Enabler [URL]
Front Row 1.3.0 [URL]
Front Row 1.3.1 [URL]
Pacifist [URL]
Installing: Put Front Row 1.3 package on desktop. (don't open) Open Enabler and Install Front Row. Enable Front Row (if you get an error you probably already have it enabled). <Restart> Use Pacifist to open FrontRow 1.3.1 package. Find Front Row App (System>Library>Core Services) Install the app and Replace when prompted.
Soo...I just picked up a mini to run plex and use as a media center. Hooking it up to my projector via VGA cable. When I set the display settings to the native resolution on the projector there is a small black line or bar down the left hand side of the screen. Not on the right but only on the left. why this would be happening?
View 6 Replies View RelatedJust a warning, I bought a Mac Mini (2009) and wanted it to hook it up to my TV. My TV does not have HDMI or DVI inputs so I bought a Mini DVI to Video adapter from Apple.But I could not get it to work, then I googled for it and it seems this adapter does not work with 2009 Mac's since it does not output an analog signal anymore!
URL
So anyone that wants to hook up his new Mac to an older TV set with the Video adapter, you are warned.I guess i'll have to buy a Mini-DVI to VGA adapter and then a VGA to SVIDEO converter..
Are there any Wireless USB Adapter Cards to pick up wifi for the Mac mini?
I don't have an wifi card built in to mine. So that would help a lot if there was.
When I plug my Intel iMac into our old Sony Trinitron via the S-Video input no connection can be made. Is this a problem with leopard not recognizing my TV or possibly something else?
View 9 Replies View Related