I have my 09 mini connected to a Dell E177FP and I have the energy preferences set to turn the display off after 15 minutes. The problem is that the display never turns off. It just sits at the "check signal" screen as if it was not plugged into anything. How can I get the monitor to go into standby mode?
View 6 RepliesI hooked up my macbook pro to a mini display port to a dvi -> hdmi to my tv no problem. However, when I hooked up the mini display -> dell monitor, I get nothing. The screen is black. The weird thing is that my macbook pro recognizes that a second monitor is plugged in... it just won't display anything
View 9 Replies View RelatedI have a new Macbook Air 13", 4GB RAM, 2.13Ghz, 256GB SSD.
I'm connecting the Macbook with the Apple Mini Displayport to DVI connector to a DVI cable to a Dell 2407 monitor with a resolution of 1920x1200. The resulting image is blurry. The fonts are blurry and drop shadows on the screen flicker quite badly. The resolution on my Macbook is indeed set to 1920x1200 to match my Dell 2407.
Does anyone know what the problem could be? Is the problem with the Mini Displayport to DVI adapter?
I know for a fact that the Dell LCD and the DVI cable work fine with my Windows 7 box. I have tried two different DVI cables as well.
I am in the market for a new display. I was thinking about getting a new dell one, but then again I love the looks of the Apple studio and cinema displays. Do you think it would be a mistake to buy a used Apple display, so long as it is in good condition? I have about $150-200 to spend
The text looks a lot different from the Macbook's display. I got it to 1080p and stuff - and yes, it's showing the full 1080p. But how do I get the text to look more like the Mac's text? My Macbook display looks so much sharper. The text on the Dell looks very not anti-aliased...it isn't thick, etc.
View 2 Replies View Related� really want a new Mac Mini and currenly have a Dell monitor from an older PC. Will this Dell monitor work perfectly with the Mini?
View 12 Replies View Relatedwhen I connect my macbook unibody with dvi to my dell monitor the quality of the screen is not as "good" as when I connect my windows pc to it. Is this only a problem on macbook, or is the mac mini the same?
View 2 Replies View RelatedI have a MacBook Pro 13 for portability to my classes at the university and a Dell 2209WA as an external monitor. One of the few good IPS monitors I could find around for cheap.
The monitor works fine in mirror mode with the MacBook Pro, but as an external display only it does not work. It attempts to wake up and then you see power savings mode again and the screen goes black as if there was no connection. Not sure what exactly the problem here is. Drivers?
The monitor works great with a Mac Mini I have and it works great in mirror but not in external display mode(the lid of the MacBook Pro closed). Anybody know of this issue? The cable is good and the MacBook Pro is not that old(a few weeks).
I'm deciding to buy myself a new mac pro coming around Jan-Feb and since mac pro's cost sooo much I'm cutting money on every corner; from buying only on amazon to using magazine coupons. The biggest money waster in my opinion is the 22' Led Cinema display apple sells. It costs around 900$ to buy an apple display which hasn't been updated for 3+ years when new Dell monitors of the same size (with camera installed and quality optional speakers) cost roughly about 400 max? I know apple displays are premium but extra 500 bucks is ridiculous.
View 7 Replies View RelatedI have a fresh install of Windows XP, service pack 2 on a boot camp partition on my macbook (13" first gen aluminum case) and a Apple LED Cinema Display attached to the mini display port.
I can't seem to make the Cinema Display the primary display (the "Use this device as the primary monitor" checkbox is always greyed out in the Display Property Settings tab). I also can't shut the macbook lid and continue to use it closed (with kb, mouse and monitor attached) like I would when booting OSX.
Is there some other way to make the Cinema Display the primary monitor, so I can leave the macbook closed when booting into Windows?
Can anyone suggest what should I do with Mac Mini 1,83 GHz Intel Core 2 Duo and my two new Dell monitors?I tried them using their standard VGI cables connected to a VGI port on a Mac Mini - both are dead. Not a single flicker.
My Mac bought from a trusted friend and acts as a practically new machine - but not with my monitors.
P.S. I went through several Mac-related forums and there's abundance of issues with "alien" monitors.
a mini display port. I purchased the mini display port to DVI adapter to hook my computer up to a Viewsonic vx2235wm 22" screen. I plug it in and get nothing. I've read on the apple support site that some people with older mac mini's and MacBook Pro's can hook it up no problem. But for me, my monitor is getting no signal and my MacBook Pro doesn't detect the monitor in the Display Preferences.
View 3 Replies View RelatedI know that the web have a lot of tips similar to this that i will ask, but i couldn't find no one exactly with what i want
I bought a new monitor, and mini-dvi adapter, an external keyboard and mouse to plug on my macbook
I would like to know how to turn off the macbook display without having to close it. I want to know that because if i don't close the macbook, both displays are on. If i close the macbook, the computer goes to sleep and then i press some keys on keyboard and the mac wake. In that point, if i open my macbook the display is turned off like i want. But i don't want to have to close the macbook all the time, and i don't want to leave the macbook closed because closed the temperature goes high.
WITHOUT closing the lid, because i like using the touchpad. i know that you can turn the brightness all the way down, but sometimes windows from the main screen randomly open on the other display. and it also slows down performance. i want to turn off the 13" screen as if the lid was closed. that way, the mac doesn't even see it.
View 5 Replies View RelatedI have seen people all over the internet saying that their MBP monitor would not turn on, but I have not seen my situation before. I used the computer a week ago (it's a work machine and I'm a part time intern) and both the external and internal monitor worked. I shut it down and when I came back the computer booted up to the external monitor but gave no video on the internal.
I shut down, removed the external monitor (connected by DVI cable) and rebooted. Nothing came up but when I connected the external again it worked fine. This had happened before, but when I shut down and rebooted without the cable connected it came back on immediately. I'm just hoping its not a bad graphics card or something that needs to go in for warranty.
I was looking through a few apple videos on the site and noticed that one of the icons was different, I haven't noticed it before but the energy saving icon is showing as an energy saving bulb, which makes more sense. Is this new? or an old design?
View 3 Replies View RelatedI am unable to put my G5 Power Mac to Sleep. I have attempted to make adjustments through Energy Saver but any changes freezes System Preferences. The spinning wheel begins and I need to Force Quit System Preferences.
Information:
PowerMac G5 2.1 GHz
Mac OS X (10.4.10)
You can automatically shut down or start up your mac at anytime you like.
simply go to energy saver preferences>and click schedule
Why my mac can't do so? Any ideas?I did set the day and time but it seems nothing did happen. What did I do wrong?
Sleeps just fine if i close the lid or if i go to apple --> sleep, but it will not go to sleep by itself according to the preferences in energy saver. Never happened on my old Macbook pro. I've looked through the sleep page on apple's site, but still cant figure it out. [URL].
View 2 Replies View RelatedThere used to be an option for a UPS configuration under System Preferences - Engery Saver for previous versions of OS X. Can this feature still be accessed for OS X 10.9, and if so, how and where?
Info:
iMac, OS X Mavericks (10.9), 2.8 GHz i5; 8 GB 1333 MHz DDR3
I just plugged in a 2nd LCD monitor via the thunderbolt connection and used a mini display adapter. I was just wondering how I can turn it off without unplugging it. I googled and came across an app called 'switchX' but I'd rather not install another app.
Info:
Mac mini
You definitely can't use an iMac as a display monitor for a Mac mini
Info:Mac mini
Whenever I try and open up my energy saver preferences a pop up appears "Could not install (null) preferences pane". The energy saver preferences is not in my system preferences anymore I have to spotlight search to try and open it. I have the highest update on all of my settings for my macbook pro (one of the original 13" pros from when they changed the macbook unibody to the macbook pro). I've tried googling and nothing really substantial comes up or I just cannot understand it. I've tried repairing disk permissions etc.
View 3 Replies View RelatedI have my Energy Saver preference set to turn off my monitor after 20 minutes of idle time. But the display never goes off.
Energy Saver used to work, now it doesn't and I have no idea why not, or what changed.
Info:
Mac Pro, Mac OS X (10.6.7), 6 Gb Ram
I have an iMac G5 1.8 GHZ And a Mac mini intel core duo is it possible to use the imac display as a monitor for the Mac mini I am aware of software such as screen recycler that uses a firewire cable but id like to connect directly via VGA/DVI so it dont lag
View 8 Replies View RelatedI was surprised one day to find an inch of white line running from top to bottom on my screen. Then after a week it expanded to two inches white line, then suddenly it turned all black and I can't see two inches of my screen from the right edge. I was reading some forums and found out that I can use a dell monitor as a secondary monitor, but is it possible to use the dell monitor as the primary monitor in case the black line will spread throughout the entire iMac screen? so the iMac would serve as a stand alone processor like a regular desktop?
View 3 Replies View RelatedJust a piece of info for those considering driving a 30 inch Monitor with the Mini: The mini-display port to Dual Link DVI adapter Apple is offering is not working. There are some other forums discussing this problem with the unibody Macbook pro. I've been using mine since Dec. At irregular intervals the screen becomes blurry (weird double lines all over), and the only thing that works is plugging back in or (more harmless if you have multiple projects up and don't want them to be scattered all over the screen) Control-Shift-Eject to put the display to sleep, then wake it back up after a few seconds with mouse or keyboard. This can be very annoying as sometimes one has to repeat it multiple times. Apple is aware of the problem, but has not come forward with a solution. I just don't want you guys to be disappointed in your new Mini with a capable graphics card...
View 19 Replies View RelatedHave new MacMini... need to connect both a display VGA and a separate digital projector but there is only the HDMI to VGA port. Could I use the Thunderbolt port for that purpose, and if I can, do I need a special cable and connector to VGA?
Info:
Mac mini, Mac OS X (10.7.2)
i have 2 LCD's hooked to the new Mini as such:
1 going mini display port to DVI adapter to DVI on 19" Monitor (standard monitor)
1 going mini DVI to DVI adapter to a DVI to HDMI on 52" LCD (Samsung TV)
i just sold me iMac and switched to the Mini not only to be able to hide the Mini which i couldn't do with the iMac but also when i watch a movie full screen on the 52 i was never able to turn off the iMac monitor and would have to cover it with a towel so that it was dark in the room except for the 52 showing the movie.
my thought was that with 2 monitors separately hooked up to the Mini that i could solve the turning off the second monitor problem as they would now both have power buttons. besides making it dark in the room i also like to have the monitor off and so that i can have Plex on the 52 always in full screen mode so my wife can just hit "Watch Plex" on the logitech remote and the TV and Stereo switch to the proper inputs and away she goes to watch whatever without having to touch the computer which when both monitors are on works perfectly.
I have a 15" unibody MBP bought in Nov '08.
Had been using the Mini Displayport > DVI adapter just fine with both HDTV and Dell monitor, BUT then all output has stopped completely!
No monitor is detected by the laptop (although the display does blink blue, as if it had detected it), tried different cables, different displays, using the Displayport firmware update, speaking to Apple, deleting the com.apple..plist files, etc
Edit: it also doesn't work in XP on Bootcamp
