Mac Mini :: Unable To Get Dual Displays / Using Mini DVI And Mini DisplayPorts
Sep 12, 2010
I have an Early 2009 Mac Mini with Mini DVI and Mini DisplayPort. And I have two 1080p HDTVs. The Mac Mini is capable of dual display, and I've gotten it to work before, so the issue is not the TV or Mac. And I have tried both Mirroring and No Mirroring.
I got a Mini DisplayPort to HDMI Adapter (#5311) and a Mini-DVI to HDMI Adapter (#4852) both from MonoPrice. And for some reason I can't get the Mac Mini to dual display, it's only one or the other.
Before I had a Mini Displayport Male and USB Male AUDIO to HDMI Female Converting Adapter (#5969) and I got video on both HDTVs, but not audio at the same time b/c one was USB and one was TOSLINK.
I'm not sure why I can't get video on both monitors. Any help?
View 2 Replies
ADVERTISEMENT
Dec 1, 2008
I've mini connected to 2 dell 24" LCD displays thru Y splitter (DVI to DVI/VGA). 1st display connects with DVI and the second with VGA.
Vista (bootcamp) can see both displays and it can extend the desktop to the 2nd display.
Since windows on bootcamp can use 2 monitors and OSX can't I would assume that this functionality has been disabled by apple in OSX or display driver. I know that the windows VGA driver provided by apple (bootcamp) has the dual display disabled.
Here is the question:
Where would i have to look in OSX to enable 2nd display?
View 8 Replies
View Related
Apr 17, 2009
so I love Macs but they're frustrating the hell out of me. I wanted to run dual 20" displays (portrait) and one 30" displays using a Mac Mini and a Macbook Pro. I know the new Mini should do it, but I've heard bad things about Apple's Dual Link DVI adapter. Also, I don't think there's a way for a Macbook Pro to drive a 30" Display and a 20." Am I missing something? What should I do?I'd much rather buy a Mac Mini than the Mac Pro which is way too powerful.
View 4 Replies
View Related
Mar 3, 2009
if will support Dual Displays simultaneously?
View 22 Replies
View Related
Feb 2, 2012
I installed the Apple 5770 card in my Mac Pro 3,1. Works great with my monitor on the DVI port. However I have a second monitor and it won't work on either of the mini displayports. I've tried the displayport -> DVI adapter, and the displayport -> HDMI adapter. I've also tried putting both monitors on the displayports with adapters. The only configuration that works is 1 monitor on the DVI port.
Info:
Mac Pro, Mac OS X (10.7.2)
View 14 Replies
View Related
Sep 25, 2008
Is there any way to hook up two monitors to a mini?
View 4 Replies
View Related
Mar 9, 2009
Just about to purchase the new mini and I need to buy the adapter to use dual monitors. Is it the Apple Mini-DVI to DVI Adapter that I need to buy? I'm connecting my Samsung 24" which is dvi.
Just wanted to double check before I purchased it.
View 22 Replies
View Related
Mar 4, 2009
So I have a late 2009 Mac Mini hooked up to my Kuro via the mini-DVI to DVI adapter then DVI/HDMI cable to my receiver. I get digital audio out of the Mini via another cable. First question, if I were to use a mini-display port to HDMI adapter would I get both sound & video?
I love using PLEX but my Mac Mini is my only "computer" (I have an iPad). I would like to sit at my desk and use photoshop and other tools. Second question, can I do dual display using the mini-DVI and mini-Display Port jacks at the same time on a Late 2009 Mac Mini?
My gadget loving self has purchased a HP Wireless TV Connect. I was planning to use the dual HDMI output of receiver but I couldn't work on the PC and have someone watch PLEX so that is why I ask about dual screen (essentially extended desktop) using those two ports. The plan is to use a mini-display port to HDMI adapter and connect it to the transmitter of the HP Wireless TV connect and then an Apple display to the receiver. Make the main display the Apple display and the extending desktop running PLEX on that screen the Kuro.
View 7 Replies
View Related
Mar 28, 2009
Just a warning, I bought a Mac Mini (2009) and wanted it to hook it up to my TV. My TV does not have HDMI or DVI inputs so I bought a Mini DVI to Video adapter from Apple.But I could not get it to work, then I googled for it and it seems this adapter does not work with 2009 Mac's since it does not output an analog signal anymore!
URL
So anyone that wants to hook up his new Mac to an older TV set with the Video adapter, you are warned.I guess i'll have to buy a Mini-DVI to VGA adapter and then a VGA to SVIDEO converter..
View 8 Replies
View Related
Apr 12, 2010
So our church just purchased a nice refurb iMac to use for media presentations during weekly worship services. We have a projector with a VGA cable, so I bought a mini display port to VGA adapter from apple so that we can connect our shiny new iMac to our big screen.
However, when we attempt to connect our VGA to our adapter, they don't fit together properly. It's like the screws on the VGA cable aren't long enough to screw into the adapter...thus, the cable won't stay connected to the adapter (it just falls out).
Someone suggested getting an S cable to replace the VGA cable, but Apple tells me there's no adapter to link the S cable to the iMac. I'm absolutely clueless...surely there is a way to connect my wonderful new iMac to the big screen.
Any ideas?
View 1 Replies
View Related
Apr 6, 2009
I need to connect my 09' Mac Mini to my Yamaha RX-V2700 receiver which outputs to my Sony XBR HDTV. I know the mini has both mini-dvi to dvi and mini-dp to dvi or hdmi available via adapters. I was thinking to go with option 1 however I was wondering what is your opinions? Is mini-display port better over mini-dvi or are they the same? Audio will be carried over optical toslink.
Option 1:
Using mini-dvi adapter to dvi: Connect Dvi-Hdmi cable to receiver and output audio with toslink adapter.
Option 2:
Using mini-dp adapter to dvi or hdmi: Connect Dvi-Hdmi cable to receiver and output audio with toslink adapter.
View 6 Replies
View Related
Dec 26, 2008
I have a cheap hdtv. when i connect my macbook to it it doesn't get a signal (via mini dvi to hdmi) until i click "detect displays" on my laptop, then "gather windows," then when i set the display to the proper resolution (720) the image appears on my tv without a problem.
I just got a mac mini, and since i don't have two monitors I cannot use this trick. I get no image on my tv.
View 5 Replies
View Related
Jul 25, 2009
my mum has a mac mini core solo 1.5ghz. those cannot read the dual layer dvd discs so therefore i cannot upgrade the leopard to snow leopard directly. is there any other way i can do it? i checked to see if remote install was on the mac mini but it dosent come with it so anyone have any tips?
View 4 Replies
View Related
Mar 2, 2009
Just curious can use both to drive the 24" LED ACD AND another 2nd monitor via mini dvi?? That would be a dream come true!
View 13 Replies
View Related
Mar 18, 2009
Okay I'm writing this for anyone who feels the same as I did about doing this and is unsure whether or not to do it. Maybe it can help someone
Last night I finally got round to upgrading my mac mini to 4GB of crucial memory using a 1.5" putty knife, mini screw driver set, pizza cutter, bright LED torch and towel. And boy was I pooooooping it during the whole process!
But don't let that put you off as if you do your research, take your time, double check everything you do, then double check again, have all the tools by your side and you are not a clumsy oath then you should complete it with out any problems.
My main concern is how much pressure you have to put on parts to remove them, compared to how easy they seem to come off on the vids I've watched. And how easy they seem to put the frame and memory in and out. As this is certainly not the case for a newbie!
The main outer casing for a start takes a lot of force and you are not quite sure how far down to put the putty knife. You think your going to damage the clips or case, but it seem really robust, you just have to trust it and do a little bit a a time working your way around the base.
The 2 small antennas seemed like they were going to snap on removal, really where attached well. One more than the other which caused me some stress
The bigger corner antenna, comes of okay, just don't squeeze the clips in to hard, as I did and managed to bend one in to much so when re-fiting I had to bend it out so it locked into place.
The next bit - the screws... make sure you have plenty of small screw drivers, all the ones I had were not small enough, so had to make a quick trip up to the DIY store half way through the job! The screws are impossible to get out unless you have a magnetic screwdriver, I could only get one out, left the other 3 un-done but still in the frame
The ribbon cable came of easy taking my time with a small screwdriver. After all this the whole frame came out giving me access to the ram - this took some jigging, be careful of the antenna wires and the ribbon.
Ram came out easy, but the 2 sticks I put in were not so easy. I could not see exactly where they had to go in, and took some force to get them in. Think it's all about getting the right angle though.
Everything went back pretty easy apart from the frame, this was a bit awkward getting it to fit exactly, but eventually it popped in to place.
I now have 4GB and intend to do the same process again when I can decide on what hard drive to buy to replace the 120GB internal + I am going to do my brothers.
Overall I am very happy I have saved my self money doing it myself, and learnt about the inside of a mac mini.
View 11 Replies
View Related
Jul 29, 2010
I'm about to pull the trigger on the new mac mini as my primary desktop computer, but was wondering if I can connect two displays (via the mini display to vga adapter and the hdmi adpater).
View 6 Replies
View Related
Mar 15, 2012
i'm thinking of buying a Mac Mini and this is the only thing holding me back. i have one monitor which uses DVI and another that uses HDMI/VGA and DVI. what do i need to be able to power two displays? the Apple Store says it can power 2 but i don't know what i need to buy to do this.�
View 8 Replies
View Related
May 21, 2012
It is possible to connect 2x ext. Displays on the new MacMini (Mid 2011). I am looking forward to connect a HDMI flatcreen and a 20inch DVI display
View 2 Replies
View Related
May 18, 2012
2010 Mac Mini, 10.7.3, dual DVI displays. - Several times a day, it shows a yellow checkerboard pattern in some windows. So far, it's appeared in Chrome, Entourage and Excel 2008. The problem occurred both before an after we upgraded the RAM. These checks appear sometimes when scrolling, sometimes while waiting for a web page to load. They go away generally with the same actions... clicking, scrolling, etc.
View 10 Replies
View Related
Jun 20, 2010
Been working with a new mac mini in my office the last 2 days. The power settings are set to make the display only go to sleep after 15 minutes. System set to never go to sleep and hard drive never spins down. 3 of the 4 times since working with this thing when moving the mouse to wake up the display I get nothing but noise and snow on the screen. To get back to functioning correctly I have to put the computer to sleep with the power button and back on again. Once it comes back, it will work fine.
New mini 2.4 running 10.6.4. Monitor is hooked up via DVI through the mini display port.
View 12 Replies
View Related
Jun 23, 2010
The old Mini worked fine with my Westinghouse 24" LCD monitor (HDMI input -connected to Mini via DVI->HDMI cable).The new Mini Server 2010 has HDMI out, so I used a straight-through HDMI cable. The display looks terrible! All of the fonts appear to have a 'shadow' next to them - almost like an old analog VGA with 'interference'.Thinking it could be the cable, I went back to my old Mini's DVI->HDMI cable (and used the new Mini's HDMI->DVI adapter to connect to it). Same results.The Westinghouse monitor's native resolution is 1920x1200. The Mac says that it's configured for 1920x1200.
View 14 Replies
View Related
Jul 1, 2010
I do have a copy of the the Mac Mini SL Client software but I don't have another Mac to create the USB restore disc in order to load the client on the Mini Server via usb drive. I don't intend to use the Server Software and don't want to 'activate' the license so I can resell it instead. Can I just use the Server to create the bootable restore disc without 'activating' the Server License and locking it to my serial number? Or is there another way to create the restore disc if you don't have access to another Mac to run disc utility?
View 6 Replies
View Related
Feb 6, 2012
Have a new Mac Mini, using an external drive but I can't get it to show up in finder. It's a Lacie 1TB Porsche design HDD, using a USB connection directly into the mini. I tried it at first by connecting to an open usb on my cinema display..no good. Also no good when connected directly into the mini.
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 15, 2012
My old Mini is in the next room to the wireless DSL modem. It gets one to three max bars, usually two, and it's just through one interior wall. I don't want to spend a bunch of money, I just want to get a little better reception in the next room. I have seen USB wifi antennas advertised. Would that do anything for me? My iBook G4 in the same spot gets full reception no problem.
View 5 Replies
View Related
Apr 15, 2009
I have just read a ton of forum posts and want to make sure I am going to buy the right accessories to make my new Mac Mini all it needs to be to run my home theater.1. For 5.1 audio, do I need to buy this product and then just use a standard Optical audio cable to plug into my receiver?2. The new Mac Mini comes with a mini DVI to DVI connector correct? So all I will have to buy is a DVI to HDMI cable?3. Is OWC (other world computing) the best place to buy upgrades for the mac mini? I have looked at the videos on youtube and it seems like something I should be able to do no problem.
View 10 Replies
View Related
May 25, 2012
Is there an adapter that connects a mini DVI to a mini Display port so I can use one computer as an external monitor?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 2, 2010
I finally upgraded from my 15" PowerBook 1.67 to the new 13" MacBook Pro 2.66. On the PowerBook I would usually run an external display using a single link DVI cable. I have read about the issues with the apple mini display adapters not working on DVI-I or non fully digital displays, but since I had been running the external via single link DVI (digital correct?) I figured that I wouldn't run into any problems. I did some troubleshooting with what I had and plugged my computer into my TV through the mini display adapter to a single link DVI to HDMI cable and all worked fine. Do you think that a dual link DVI cable could solve the problem connecting to my monitor? Or is my monitor flat out incabable? Third party adapter? Worst case I could just go VGA, though I don't want to. My monitor is a Sceptre x20.
View 2 Replies
View Related
Sep 21, 2010
I don't have one...but want to know is the mac mini has an ethernet connection to hook to my wired rotter?
View 1 Replies
View Related
Jan 9, 2011
One of the drives in our 2009 mac mini server 2009 has died. I have taken apart many minis so have no problem taking it apart to replace, but does anyone know which drive is the primary, "Server HD" drive? Would it be the top drive (first drive you come across during disassembly) or the bottom drive closer to the logic board with the two pads stuck on? Just wondering if anyone knows for sure so I can avoid removing the drive that's still working fine.
Also, to keep the server running in the mean time, I am booting to the second drive which is working fine. Just curious, once the dead primary drive is replaced , can I simply use carbon copy clone to copy back from the 2nd drive, or will I need to install snow leopard server back onto the new drive?
View 4 Replies
View Related
Jan 8, 2008
I have a Mini Media center that I installed Front Row onto. When I updated to 10.4.11 I found that Front Row was broken and I finally figured out how to get it going again. I'm posting this simply for the spreading of knowledge. What you'll need:
Enabler [URL]
Front Row 1.3.0 [URL]
Front Row 1.3.1 [URL]
Pacifist [URL]
Installing: Put Front Row 1.3 package on desktop. (don't open) Open Enabler and Install Front Row. Enable Front Row (if you get an error you probably already have it enabled). <Restart> Use Pacifist to open FrontRow 1.3.1 package. Find Front Row App (System>Library>Core Services) Install the app and Replace when prompted.
View 4 Replies
View Related
