Mac Pro :: Hour Of "inactivity" And Not Wake For Ethernet Administration Access?
Jul 2, 2012
I have my set Mac Pro to sleep after 1 hour of "inactivity" and not wake for ethernet administration access.My question is: What is "inactivity"? It seems that my computer never sleeps fully. I have iStat Menus and Dropbox installed. Will the computer sleep no matter what if I don't touch the keyboard or mouse or unplug/plug stuff in/out? Or will certain apps keep it from sleeping? I am worried that something is preventing it from sleeping.
Info:
Mac Pro, Mac OS X (10.5.8), 2008 8-core
View 6 Replies
ADVERTISEMENT
Jun 1, 2010
I just got myself an mac mini and i really love it. Mostly use it for Plex as an media center, but here is the problem.After 1 hour inactivity it's set to go to sleep. and when i wake it up it work fine for about 10 seconds then it goes back to sleep, and i have to wake it up again for it to work.
View 4 Replies
View Related
Jan 17, 2009
I recently upgraded my PowerMac G4 Dual 1.0GHz to leopard and am having major sleep issues. computer will not wake most of the time after being asleep for more then an hour or so. This was not an issue under tiger, reinstalled leopard on a freshly formatted hard drive and the problem still exists. I am also experiencing the problem on my intel imac, not to the same degree however?
Power Mac G4 Dual 1.0Ghz, 1.5GB Ram, ATI Radeon 9000 Pro
iMac 1.83GHz CoreDuo, 2.0Ghz Ram, ATI X160
View 3 Replies
View Related
Jan 7, 2011
I am still having this waking up issue with my mba 13. When it sleeps for more than 1/2 - 1 hour. It doesn't seem to wake up. It normally wakes up asking my password on top of the screen. But sometimes it reboots. Today something weird happened..the welcome screen came up asking my password.
I entered it and I seen the blue desktop screen, than back to the password box. I entered my password 3-4 times.. it did the same thing. I pressed and hold the power button. Turned it off then back on. Again my outlook file under windows xp in parallels is corrupt.
View 8 Replies
View Related
Mar 26, 2010
The 27 iMac sometimes wakes with ethernet hosed. If I go to network in system preferences and disable and enable again it works.
Sounds like a driver problem. Also sometimes back to my mac works and sometimes it does not.
Wish apple would hire more developers to fix osx instead of just writing iPhone os.
View 2 Replies
View Related
Jul 11, 2009
So my MBP 13" 2.26ghz worked up until the firmware update was installed, and then everything froze up and it took about 15 minutes to boot up, 5 minutes to shut down. So i called apple, and after a 1 hour phone call, they told me that i could get it replaced. I live an hours drive from the nearest apple store, and will have to drive up there to get it replaced, do you think i could ask for some kind of compensation for my problems, and having to drive 4 hours (2 to buy it the first time, 2 more to get it replace) to take care of the problem.
Do you think I could ask for the 2.53ghz model, or an apple/itunes gift card. or Should i even ask for anything, i mean i paid 1200 for this computer, and after 3 hours of owning it is not useable, and now i have to spend all this time trying to get it replaced.
View 24 Replies
View Related
Sep 1, 2009
It keeps saying you need a Time Capsule from '2008' to use this feature. I thought they were all from 2008+? So is this really saying it won't work with the first generation time capsule? The second generation being the one that added wideband support?
View 1 Replies
View Related
Feb 12, 2012
I've upgraded to Lion and everything's fine apart from one problem: using my iPad to access home shared iTunes content on my mac no longer works when my mac is asleep. That's a change in behaviour from Snow Leopard; I used to be able to sleep my mac and then wake it over wifi using either my iPad or iPhone to access all of my home shared libraries. The mac screen used to light up for ten seconds and then go dark again, but it served me the files.
Lion seems to go into a deeper sleep which it can't be woken from. If I attempt to wake my mac from my iPad within about ten minutes of putting my mac to sleep then home sharing seems to work and lets me use the home share libraries, but if I leave it any longer than that then the mac seems to fall into a coma and can't be woken. The weird thing is that I still see a "shared library" folder on my iPad, but when I click on it nothing happens. I think my Time Capsule is listening for wifi access and issuing the magic packet to the mac, but the mac just ain't listening.
I'm using a Time Capsule in bridge mode from an ADSL modem and I've accepted a TC firmware update last week and I'm on lion 10.7.3. I've tried using Ethernet to connect the mac to the TC (and temporarily disabled the wifi connection) but that still doesn't work. Also, note I'm NOT suffering from the problem that 10.7.3 seems to be giving a few other people - my mac reconnects to my wifi just fine when I wake it up manually. For the record, This was an upgrade, so there's still a tick in "wake on network" in power settings and home sharing on iTunes is still configured the same as it was before.
Info:
iMac 27" i5-760, Mac OS X (10.6.7)
View 14 Replies
View Related
Jun 2, 2012
After Lion upgrade I cannot get my remote access program (Timbuktu) to show my desktop to remote users. The sleeping screen (not the hard drive) is set for "Wake for network access" and all other settings are checked and appropriate including an update to the newest Timbuktu 8.8.3. The screen wakes from keyboard or trackball activity but not for incoming access. Note: The remote user sees the frame for the desktop in Timbuktu but is shows a sleeping (dark) screen. The file and clipboard exchanges still work but the screen ignores the instruction to wake. Access worked perfectly with Timbuktu until three weeks ago. Then it just sleeps like a teenager on Saturday morning unless tapped on the shoulder by a parent. Call-ins don't get answered.
Info:
iMac, Mac OS X (10.7.4)
View 14 Replies
View Related
Jun 28, 2012
I will soon be getting a new macbook pro ret (soon) and will leave my macbook (13-inch, Aluminum, Late 2008) in the office where I am situated in university. I am looking to ensure that I can leave one at office and one at home. Yet keep access to both, I have seen "logmein pro" and seems to look good except one problem. It says to wake from sleep you need a computer on network running logmein. This I cannot guarantee as it is a university network. It also says that it will need to be linked to the network through cable to wake from sleep.
I will also need to close the lid of the laptop (or leave it open and risk trashing it) and have a password/login lock incase someone decides they want to be naughty. Anyway, I need a program that i can use over wifi (not highest priority) that WILL wake my macs from sleep (highest priority) and WILL (essential) allow me to have full remote access to computers including drag and drop. I dont care about accessing from my mobile as have drop box.
Info:
Mac OS X (10.7.3)
View 1 Replies
View Related
Aug 15, 2009
I am trying to get onto our home wireless network using a G4 a friend has just given me. It doesn't have an airport facility so my friend has also given me a 802.11g wireless ethernet adapter. I have followed the instructions exactly (accessing the adapters internal configuration and setting it to the wireless networks SSID and channel, then going back into the network settings and re-setting it to "obtain IP address using DHCP') When i restart the computer the network status reads as "built in ethernet is active and has a self-assigned ip address. you may not be able to connect to the internet" (the marker next to it is yellow)
needless to say I cannot connect to the internet.
View 1 Replies
View Related
Dec 4, 2014
I have updated my 2009 imac to Yosemite but with my ethernet cable plugged in I cannot access the web. The wireless works when the cable is unplugged but no internet when I plug it in. The ethernet is shown as connected with an IP address etc when I check network preferences.
Info:
iMac, OS X Yosemite (10.10.1)
View 5 Replies
View Related
May 26, 2012
i forget the administration password, is there a way to do a new one?
View 1 Replies
View Related
May 29, 2012
I have latest iTunes 10.6.1 and its library located on external drive, connected by FW800.
System properties -> Energy saver -> Put the hard disk(s) to sleep when possible is On Everything works perfect in case of local access.
Also in case library's drive sleeps, it takes just several seconds more in order to wake drive. But remote access works only in case the drive is waked somehow. I.e. if Home Sharing is enabled and drive sleeps I cannot get access to the content from remote iTunes or Apple TV.
I think it is a bug, remote access shall be not broken in case the drive is sleeping. Also it is known, some forums explain that you shall never put external drives in sleep mode in case this drive used for iTunes Home Sharing [URL]
Info:
Mac mini, Mac OS X (10.7.2)
View 3 Replies
View Related
Mar 6, 2009
I have a 24" iMac that has completely all of a sudden stopped wanting to connect to the internet. However, my Macbook, connected to the same ethernet cord or wireless network, works flawlessly and has no trouble. The iMac will find the wireless network...show full bars...then drop a bar....then another bar, then another, until only the smallest bar is available. It will transfer data but only for a few seconds until it wont work at all. Now the macbook, sitting right next to the imac will show full bars and stay that way. So i tried a ethernet cable to the iMac and it will not even pull up 1 single page, but the same cable connected to my Macbook will work flawlessly.
View 3 Replies
View Related
Feb 20, 2012
I created an access point from a router. My question is if I can get a faster connection to devices near to the access point with the direct connection or will a direct connection not work with an access point?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 5 Replies
View Related
Dec 29, 2008
I am wondering how can I administrate multiple Mac workstation across LAN as well as distribute software mpkg. I am thinking of doing this because I don't have a Xserve and ARD is just too expensive.
View 4 Replies
View Related
Jun 23, 2012
I have a Mac mini, Mac OS X (10.6.8) and i am trying to set up an account for someone who regularly logs onto my guest account. I am doing this so whenever they are here and need to use my computer, they can use it without using my account( the admin account) or guest account( where the have to log into guest account and work on whatever it is they needed to do, then unfortuanatly have to erase all files from that day so they can log out )
I still want it to be an account for that person to have when they are here, but NOT guest account. Just an additional account.
Info:
Mac mini, Mac OS X (10.6.8)
View 2 Replies
View Related
Apr 21, 2010
I am connected to a wireless router downstairs for my internet connection. I am trying to use my new (bought second-hand on ebay) time capsule to store all my files on. I have installed the disk that came with it but when I try to find the capsule via Airport Utility it is unable to do so. The amber light is flashing like it is supposed to. I have tried using the ethernet cable also but my mac doesn't notice it
View 1 Replies
View Related
Sep 12, 2009
Noticed that my new MBP with 10.6.1 wasn't going to "sleep" after the time specified in System Preferences -> Energy Saver -> Computer Sleep. Closing the lid or choosing 'sleep' from the apple menu worked fine. After playing with it a while, I _think_ I might have narrowed down the issue:
First, a couple of questions to see if the problem I'm seeing is only my own, or a common issue.
If you are having the problem, is your MBP unibody? with SD slot or expresscard slot?
Are you using the Apple factory HDD or an aftermarket one?
How I fixed the issue: I had the option selected on the same preference pane to "Put the hard disk to sleep when possible." If I unchecked this item, the machine would sleep after the specified time of inactivity (Actually, it would take about 30 seconds longer while the machine wrote the memory contents to the HDD.)
If you had the problem, does this fix it for you? If you did NOT have the problem, does checking this box create the problem for you?
View 5 Replies
View Related
Aug 20, 2010
I have a C2D iMac about 3 years old, with 10.6 and all the updates. I have it set to go to sleep after 30 minutes of inactivity. Sometimes at night I will use it to listen to a podcast or watch a TV show. When I do this, it never goes to sleep. It's always still on when I wake up. The display will sleep, but not the computer. I can put the computer to sleep myself through the Apple menu, but it never sleeps due to inactivity.
I'm worried that having the computer on 8 hours a night due to this problem will shorten its lifespan. Does anyone have an idea of what may be causing it? Does it have something to do with webpages being open? I always have Safari open. It's easier to leave pages open than it is to go through dialog boxes and menus to create and delete bookmarks all the time.
View 2 Replies
View Related
Jun 23, 2014
I can get Mavericks 10.9.3 working again now after freezing constantly but now it seems to freeze after being inactive or when I stop to go do something. This MacBook Pro worked fine before upgrade.
View 3 Replies
View Related
Aug 25, 2008
Lately I'm starting to notice that if I leave my Macbook just sitting there for awhile, when I return to it, it didn't go to sleep, but it rather logged me out, leaving me at the login screen. I then have to re log in and re-open everything I was working on.
View 2 Replies
View Related
Feb 5, 2009
I reset my PRAM yesterday to fix some issues with videos being choppy. It has helped somewhat in that regard, but I've noticed a new issue with my display becoming dimmed. I have my screen saver set to kick on after 5 minutes of inactivity. My display is set to turn off after 15 mins. My display is dimming, however, after 2 minutes of inactivity? It's very frustrating, and is actually causing me headaches because of the differences in brightness.
View 4 Replies
View Related
May 23, 2012
Recently I am having issues with the screensaver setting, it comes on every time I reach the log-in page while booting, and instead of turning on after 'x' minutes of inactivity it just gets turned on after 'x' minutes. Means if I slide it to 5 minutes, I get the screensaver on after 5 mins, be it doing work or watching a movie in it.
Macbook Pro Mid 2010 15" 2.66GHz I7
OS X Lion 10.7.4
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.4)
View 1 Replies
View Related
Jan 10, 2010
After just over one minute of inactivity (no moving mouse, typing, etc.), I get a "Logout, Cancel, Restart, Shutdown" screen. If I don't quickly click out of it, the computer totally shuts down. I have an Intel Macbook. I don't believe it's a hardware problem; I've run the hardware test and it comes up clear.
View 7 Replies
View Related
Apr 29, 2012
If I am reading a page, for example, and I do not touch the mouse or the keyboard, the display turns off after approximately two minutes no matter what the setting is for the power savings feature.
Info:MacBook Air, Windows7
View 5 Replies
View Related
Feb 4, 2012
I have been receiving the shut down signal continually every ~6 minutes now for two weeks. Apple care is unable to fix the problem....did the OS reload, and other permissions fixes without success.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 6 Replies
View Related
Apr 19, 2012
Since recently updating Safari to 5.1.5, I can no longer access my online class. I AM able to log into my account, but when I click the link to enter my classroom I receive the following error: There is a problem with your authentication, possibly due to inactivity. For your safety, you have been logged out and must sign in again to continue.
I have thoroughly researched this issue. I attempted to delete all website data, deleted the cache, reset Safari. I have not had success with all of these attempted fix actions. I am NOT interested in reinstalling Lion--NOT happening. I am able to access from Firefox on my Mac, my work computer, my iPhone, my iPad, and my Windows PC with no problems. I tried on my wife's Mac with Safari 5.1.5 and I got the same error. So it is obviously an issue with the browser, not my machine.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
Jan 25, 2010
I like to install a ethernet Bond with two additional netgear ethernet cards. but i dont have a signal on the bond.
who knows more. the machine is a powermac g5
View 2 Replies
View Related
