OS X :: Aiport Utility Cannot Find New Time Capsule Nor Access It Via Ethernet
Apr 21, 2010
I am connected to a wireless router downstairs for my internet connection. I am trying to use my new (bought second-hand on ebay) time capsule to store all my files on. I have installed the disk that came with it but when I try to find the capsule via Airport Utility it is unable to do so. The amber light is flashing like it is supposed to. I have tried using the ethernet cable also but my mac doesn't notice it
View 1 Replies
ADVERTISEMENT
Dec 31, 2010
I just went through a long and complicated process that started when my apartment was burglarized and my laptop was taken, through getting a new laptop, replacing that harddrive and restoring from a backup of my old laptop. After all that, I hooked up my new laptop to the time capsule and restored everything via ethernet. I'm now using my TC as a network extender for the house, I can connect to it and see the files in there, but when I try to set up Time Machine to use it, it starts backing up my entire laptop all over again, which apparently would take 48+ hours over WiFi. I'm guessing that when I set it up earlier and made the backup, it was over Ethernet. Now, it can't find the time capsule over ethernet, and thinks that the time capsule via WiFi is a new source. Is there any way to select a time machine file to use and update? I'm using a 1st generation 1 TB Time Capsule with an uMBP 13", 10.6.5. All software is up to date.
View 1 Replies
View Related
May 16, 2012
I recently upgraded to OS 10.7 and now can't find my Time Capsule under devices to access individual files stored on it. The system is recognizing it under time machine and is doing full backups to it, but only the backup portion is accessible through Finder. How do I get back to where I can pull up the contents of the Time Capsule on an individual basis?
Info:
MacBook, Mac OS X (10.5.8)
View 2 Replies
View Related
Jan 3, 2009
I have a Netgear wireless N router and i just purchased an Airport Express N base station. I want to use the ethernet port on the Express to connect to a Blu Ray player that only has ethernet (no wireless). I read somewhere that WDS will work.
View 4 Replies
View Related
Dec 7, 2010
Now I want your assistance in some problems that I have with my Time Capsule. This is my scenario:
TC --- (WAN port) --- SW --- INTERNET
|
+--- (AP) --- MBP 13"
One thins, I don't know why but when I post this thread the WIRELESS moves to the TC. The connection of the AP is directly to the SW, not to the Time Capsule.
TC.- 192.168.2.2
SW.- 192.168.2.1 (interface attached to the TC)
SW.- 192.168.1.1 (interface attached to the access point)
MBP.- 192.168.1.23
The TC has the AirPort off. I can access the TC if I type the IP address when open the AirPort application, what I do is this: AirPort application -> File -> Configure other I type the ip address 192.168.2.2 (The TC current IP address) and I'm able to see it. The problem is that if I try to open the Time Machine application I can't find it because the AirPort application stuck in RESCAN.
View 16 Replies
View Related
Mar 5, 2008
Whenever I plug my Time Capsule into my Macbook with an ethernet cable it is not recognised. On the network setting it says that the ethernet is assigned an IP but whenever I try to start a backup session the device is not displayed? I can connect the Time Capsule wirelessly however due to the time it takes to do the initial backup I want to do it via ethernet.
View 5 Replies
View Related
Oct 5, 2010
I currently have a Sky provided D-Link modem router that provides my wireless internet (in my lounge, as this is where the phone line is), and the Time Capsule sits nicely out of the way in my kitchen, wirelessly backing up via Time Machine. My wife would like to sit in the kitchen and work on her laptop, but her company's IT policy means that she can only connect via Ethernet. Currently she has to connect to the D-Link in the lounge and sit on the floor. Is there a way of connecting her laptop to the ethernet ports on the back of the TC and then wirelessly connect to the internet?
View 3 Replies
View Related
Aug 8, 2009
I will soon get a time capsule. The only thing it does not have, which I need, is an audio jack so I can use airtunes. I have an old (circa 2004) airport express. I would like to set the airport express right next to the time capsule and add it as a client on the time capsule's ethernet network.
I prefer to connect it via ethernet, than to just add the AEX as a wireless client of the time capsule, for two reasons:
1) if connected via ethernet the AEX is less likely to drop off the network for random reasons.
2) the AEX is old and I don't want it to slow down the time capsule's wireless network (every other wireless client of the time capsule will be 802.11n).
So I basically want to shut off the AEX's wireless capability and just connect it via ethernet as a LAN client of the time capsule. Is this possible? Or is wireless the only way to add an AEX as a client to a network.
View 1 Replies
View Related
Aug 11, 2009
So I am moving to a new apartment in a week, and the landlord allows us access to his wifi in the building free, but I will not have access to the modem. I currently have a Time Capsule set up as my wifi router and was wondering if, upon moving, there is a way to run the wifi signal through my Time Capsule and use that as my wifi connection?
View 1 Replies
View Related
Sep 12, 2010
at what speed data is transfered to TC if IMac (Quad Core I5) is connected to it via ethernet port?
View 2 Replies
View Related
Dec 23, 2010
I have a new 1 tb Time capsule that I connected with the macbook pro i7 with a ethernetcable in the ehternet outlet next to the usb on the time capsule.
However, I dont see the time capsule hard drive in the Macintosh HD devices.
View 2 Replies
View Related
Jun 29, 2008
I've got a Time Capsule attached to an Ethernet network, which gets it's internet access from DSL. I can't seem to get the configuration I want. I'd like it to be part of the ethernet network, available to Macs on the network and I'd like it to act as a wireless access point for Macbooks and Macbook Pros. But when I go through the Airport Utility install, once I tell it it is to connect to the network, which already has internet set up through DSL, then it won't allow me to set up wireless. It's as if it wants to work one way or the other. And the instructions are confusing about which port in the back of the unit to insert the network cable. I did manage to get it set up and connected to the network, and to deliver wireless, but I ended up creating a "bridge" and doing things I did not quite understand.
I ended up creating a wireless network and I guess "bridging" that network with the ethernet. Maybe that's the right thing to do, I don't know. Maybe I'm just not understanding the terminology right. is "creating a wireless network" the same thing as merely creating a wireless access point for a wireless device to connect too? I guess I was thinking that they were two different things, maybe not. So, it's probably a simple thing, and I hope someone can just tell me in what way I am supposed to set up the Time Capsule. I know I got it working, but I can't even remember how after a zillion tries I even got it working right.
View 6 Replies
View Related
Jan 18, 2009
The Apple site is quite vague on this point but I thought I'd clarify before buying one. I have a Time Capsule as my main router, but I want to move it, but when I do it's out of range of one of my computers. Can I plug the Express in near the computer, and then Ethernet it up to the computer, or is that Ethernet port meant to go into the TC?
View 3 Replies
View Related
Mar 27, 2009
I have a first generation Time Capsule. I want to by a laser all-in-one printer and would like to be able to print wirelessly (wireless scanning would be nice too, but I'm not so bothered about that). I'm thinking of buying a Brother MFC-7840W and have a few questions:
1. This all-in-one is wireless (b/g), so if I set it up as a wireless printer using the printer's wireless feature, would it have the effect of slowing down my N speed connection for Time Capsule? I plan on leaving the printer on all the time so it's ready to print if I need it (I assume it will go into standby mode when not in use) - I don't mind it slowing the network speed just while I print, but wouldn't want it to slow my connection down permanently.
2. If option 1 slows things down, how about if I connect the printer via ethernet. Would that work easily for printing? Would I be able to scan too? In other words, is plugging in an ethernet printer on a TC the same in terms of functionality as a direct ethernet connection between my MacBook and the printer?
View 5 Replies
View Related
Dec 18, 2009
Can I backup data to a Time Capsule using Ethernet?
View 1 Replies
View Related
Dec 18, 2010
I've searched and found a couple solutions to force a Time Capsule to use an ethernet connection for data transfer. Those are 1) turn my Mac's Airport off or 2) turn off the Time Capsule's wireless network.My question is: since those solutions, has anyone found a better alternative to force a Time Capsule to use ethernet that doesn't involve turning off the Mac's Airport or changing its settings each time?My need for this is: I have a first gen Time Capsule, and despite outliving the statistics for a long time, it's finally starting to fail. It's not actually dead yet, though ? the wireless still works, but it's much, much slower than it used to be. The hard drive is fine. I've since switched our primary wireless network over to the Airport Express I was using for Airplay, and I'm having the Time Capsule "join" its new network.
View 4 Replies
View Related
Apr 18, 2008
Disregarding the internet access/router/gateway part of the Time Capsule for a moment, what is supposed to happen when you plug a time capsule directly into a Mac via ethernet cable?
- Does a dialog box come up?
- Are you supposed to be able to see the disk in the Finder?
- Is Time Machine supposed to see it?
Mine does nothing when I plug it in using a known-good cable. Suspect bad ethernet port on Time Capsule itself (because it also doesn't realize the cable is plugged in to an upstream DSL modem, either) - wondering what the expected behavior of a properly working one is?
View 8 Replies
View Related
Feb 3, 2009
Just got the time capsule, going to use it for wireless time machine back ups of my laptop. I would also like to connect an external drive to the time capsule for movies and audio files that are too big for my laptop.
I notice if I connect my owc 7200 rpm external drive via the USB port to the time capsule, things are a bit sluggish when I access movie/audio files over the wireless...What if I purchased an external drive with an ethernet port? would it work if I plugged it into the time capsule? and if so would there be a speed increase?
View 9 Replies
View Related
Feb 27, 2009
I think this has been debated somewhere, but what's the best option? And what are the pros and cons of each setup? Actually I put my Netgear in "modem only" and setup the TC as the main router and configured PPPoE settings on it. Should I have chosen bridge mode instead?
View 3 Replies
View Related
May 20, 2009
Is it possible to use an Time Capsule to connect to an airport express with a router plugged into it?
I have a small network at home, and would like to have another computer (old PowerMac g4, no wireless card) and my xbox 360 in my basement. I don't want to run cables. Is it possible to connect a router to my airport express and use it to bridge the wired computers wirelessly to the time capsule upstairs? I know it's possible to use the airport express as an extension to the wireless as a WDS but I haven't found anything online about using it as a bridge.
View 2 Replies
View Related
Jun 1, 2009
I need some advice with my wireless set-up. I have:
Airport Extreme (master network)
Airport Express (slave)
Time Capsule (slave)
Right now I have my XBox 360 hooked up to my Express through a wired connection (works fine). I have a Mac Mini hooked up to my Time Capsule through a wired connection (doesn't work at all). When I look at the settings, it isn't even an option to bridge the TC, so as it stands in its slave capacity I cannot use any of the three wired ethernet ports. Is it possible in its current network configuration to get the TC to recognize the Mac Mini I have connected through a wired connection?
View 3 Replies
View Related
Jul 23, 2009
I know there have been many posts on this in the past but I think I am getting even slower speeds than most who have complained. My TC is backing up at a rate of about 1 Gig per 45 min to an hour. I have plugged in an ethernet cable and set ethernet above wireless in my network hierarchy but it appears that this is not working. This is my initial backup so I don't want to risk it by turning off my airport if it is transferring using wireless. Shouldn't the ethernet connection go much faster even though my Time Capsule is not plugged into our modem?
View 2 Replies
View Related
Sep 1, 2009
It keeps saying you need a Time Capsule from '2008' to use this feature. I thought they were all from 2008+? So is this really saying it won't work with the first generation time capsule? The second generation being the one that added wideband support?
View 1 Replies
View Related
Dec 1, 2009
I'm facing a very misterious issue with my internet connection, using a Time Capsule; If I use a network cable to connect to the Time Capsule, the connection to the internet is very slow (Maxes at 2mbit, never more). If use a wifi connection to connect to the same Time Capsule, internet is flawlessly fast, reaching well over 80Mbit.
I checked and the ip is always the same, the downloads are the same, at the same time. Even trying with 2 computers (a Macbook and an iMac) (one over wifi, one on ethernet cable) the one using wifi can download stuff way faster. If I switch connections the one using wifi is always faster.
I use DHCP for both ethernet and wifi on the same local network, all the machines can see each other, it's just the internet connection that becomes so slow when using ethernet. The local network as as fast as a gigabit connection allows. The Time Capsule has the latest firmware installed, and has no problems at all besides this internet issue.
View 10 Replies
View Related
Nov 18, 2009
I just got my new i5 iMac. I have migrated my data to the new computer. Can I erase my time capsule so as to start fresh? If I can, do I erase it with disk utility? Is this even a smart thing to do?
View 11 Replies
View Related
Dec 10, 2014
I needed to check on my network. When I opened Airport Utility, the only thing that loads is the internet icon, showing green. Neither my TC, or an older airport extreme on my network, are identified. Clicking on the drop down shows "no new wifi or airport devices found" .Â
Info:
MacBook Air, Mac OS X (10.4)
View 4 Replies
View Related
Sep 10, 2014
I have been using a time capsule for about 2 years. I use it as an external wireless hard disk as well as a router for extending my wi-fi network (connection via ethernet). Â
For the last couple of days, Airport Utility has been showing two time capsules connected to it. One is "HVS Airport Time Capsule" and the other is "Yogender's Time Capsule". The second one does not belong to me. I have no clue who's time capsule this is. A screenshot is also attached here (one on the right does not belong to me).Â
Does it mean someone is hacking into my wi-fi and using that via their time capsule? I've changed the wi-fi password (for my time capsule's network and the original network) several times, but it still shows up.
This unknown time capsule also shows up in the finder under "Shared". Â
Info:
MacBook Air, OS X Mavericks (10.9.4)
View 5 Replies
View Related
Feb 22, 2010
I bought a new 2TB Time Capsule, and had problems completing the initial backup. I finally sourced the problem to files that were buried deep in a stack of folders, which seemed to make the file name/path too long. Anyway before I realized that I tried to reformat the Time Machine, and this seemed to work ok. However Airport Utility is now reporting the Time Capsule Disk Size as being 1.8TB, rather than 2TB.
I think before I reformatted the disk it showed as being 2TB in this menu, but I cannot be sure. I am worried that I have somehow formatted it wrong and lost some data space? If I go into Disk Utility, it does say there that the Data partition is 2TB, so it seems strange that Airport Utility shows it at 1.8TB. Can someone else who has the 2TB Time Capsule let me know whether in Airport Utility it shows as being 2TB or 1.8TB?
View 9 Replies
View Related
Jul 31, 2010
I've got a 24" imac which i've had for a couple years now but i just recently purchased a new 15" macbook pro as i was needing a laptop for going offshore. I also bought the 1tb time capsule. I had a real problem setting it up as the time capsule was not appearing on the airport utility, but after a while of messing around, i think i got it working. I have a bt homehub (wireless router) which has an ethernet cable going into the time capsule (wan port). I can now access the time capsule through the imac, macbook and my dads windows laptop. So i had a heap of movies that i put onto the time capsule and they worked fine. But now for some reason when i go to open a movie, it takes forever to load up and when it finally does its starts to buffer etc. So can anyone give advice on how to sort this? Because before the movies just opened instantly and played fine.
One other thing i wish to do is to access my time capusle from my macbook when im offshore. I've heard this is possible to do it from "back to mac" via mobileme which i have. I tried to set this up but when i registered my mobile me details to the time capsule it starting restarting it which i presume was to update the details. But it failed and then the time capsule didn't appear on any of the computers again. After eventually getting it back by restarting etc i think from then on was when the movies started playing up on it. But i have not tried to do the back to mac again incase it does the same thing! Its really driving me mad, i have been tempted just to take it back and get a normal HD but i'd rather not! As i thought by having the time capsule it would save me taking a HD with my macbook when im offshore.
View 5 Replies
View Related
Mar 9, 2012
I've been having trouble backing up my MacBook Pro to my Time Capsule (hasn't backed up in months) so I ran Disk Utility and it gave the following error: Disk Utility stopped verifying "Hard Disk". This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. So, if I do that, will I end up losing whatever is on my hard disk? And how do I start up the computer using the OS X disk? Just put it in and restart?
View 2 Replies
View Related
