Mac Pro :: Configure Hard Drive Bays For Use With FCP Aperture?
Nov 13, 2009
I just placed an order for a 2.93 Quad core, a 640gb HD in bay 1, 6gb ram with a 4870 card(didn't want to buy and flash my own as this mac pro is a gift from a friend). I really want to get a 128 SSD as OS and app drive, but can't afford it. So I will just stick with the 640gb. I will most likely raid 0 two 1gb disks in bay 2 and 3 as a scratch disk for FCP, would it be a good idea to put my aperture library on there as well for faster speed? I have around 113gb of photos in my aperture library currently. Finally, I will use bay 4 as a back up for the OS and apps. I have a drobo for data storage.
I have a 08 MP and i love it except the drive bays. Removing a drive is a bitch and frankly ends up hurting my fingers by the time it lunges out of the plug. I am wondering if there is a way to use the larger drive bay holders on the 09 MP on my 08. Also how did they add the extra room for these larger drive bays for more finger room.
I have just got a refurbished 2.8 Octo from Apple. I was glad at the first minute as it comes with an expected 16M-cache 500G HD (instead of 8M-cache 320G), as well as airport extreme card installed without additional charge. But at the same time I find out that both hard drive bays 3 and 4 are not working when I connect another three 3rd-party HDs to the machine internally. While at the same time, the original HD in bay 1 and bay 2 (which is hosting one of the three 3rd-party HDs) are working properly. Is there anything I have ignored and I should perform now to enable bay 3 and 4. Or, should I call Apple now to claim a DOA and request a replacement?
Looking at blu-ray drives, I thought of an interesting question, and I just wanted to know if anyone knows the answer...why was an older standard used for the MacPro's optical bays, especially when the HDs use SATA? And I know the motherboard has sata ports, so that's not my issue. It's just kind of a pain having to use an adapter or run a cable to the motherboard if I want to use a sata blu-ray drive for example.
As i am new to Macs I was googling a bit and came across [URL:..]it has a small part about backing up the mac regularly and mentions "Mac Pro users have extra internal drive bays which are even easier." I have a unibody Mac 13", does this have an extra drive bay that i can shove an extra HDD into? I was thinking of a 500gig.
Luckily, this is not my primary Aperture library, but another one that I started a few weeks ago as I thought my first was getting a bit large. I am unable to open Aperture at all, nor can I copy to or from the drive. Because the drive is (I believe) bad, I can't repair the library, plus, as I mentioned, I can't open Aperture anyways. I can pull the drive, but then how do I get Aperture to redirect itself so that it opens my original library, instead of trying to open this new one? Pulled the suspicious drive from my Mac Pro. On restarting, Aperture asked which Library I wanted, adding that one was no longer available. So, I'm back on the original library and things look to be running fine. Unfortunately, I hadn't vaulted yet, so the last month is probably gone. Luckily, I think I already exported the few keepers I had during that time.
This happens again and again, and it's EXTREMELY irritating.
I am trying to import some existing JPEGs on my Desktop. When I try Import in Aperture, the file browser simply does not see most files and folders. Sometimes it does and sometimes it doesn't. It seems to happen on a whim. This is very bad, I have just about had it with Aperture. And yes, permissions are set correctly.
On what basis Aperture sees or does not see certain files/folders?
I am suddenly getting a "The export operation failed to create # of files...." This is happening when I try to export to the Mac HD (Retina 13MBP)
If I export to desktop, I am ok. I have run disc utils verified disc and fixed permissions on the drive...as welll as the permissions on the Ap library, and a rebuild.
I can also export to a connected thunderbolt. It seems to only be the HD and it happens with differet export settings.
Info: MacBook Pro (Retina, 13-inch, Early 2013), Mac OS X (10.6.4), Apeture, os 10.8.5
My hard drive is full,mostly with photos within Aperture. I have created separate libraries for each year. How do I move one or more of these libraries to an external drive to free up memory on the iMac. I am using Aperture 3
Info: iMac (21.5-inch Mid 2010), OS X Mountain Lion (10.8.2)
What's the best setup with these parameters? I ran 2x750 F1s in Raid0 and was happy with performance; now I'm thinking of running 3 of these in Raid0 with the last reserve for backup but I also have an external FW for backups. Should I run all 4 of them in Raid0? I can keep my data on the external so no fear of a crash.
I need to router 4 SATA cables from each of the HDD bays into the optical bay where there will be 3 SSDs and a regular HDD. What is the recommended way to do this?
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.
I need to send files from a sony camcorder using aperture. Rather than send the files to my aperture library, I want to use aperture to import them directly to an external hard drive.
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'. I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Suggested to move the original files to the EHD and leave the referenced files on the laptop to save space and still allow edits. My question is, if you are using Time Machine, what is it backing up on the LT and how do you apply this to the data on the EHD?
What I am trying to achieve is to move my Aperture library to an external HD. and clone it to a second drive and backup the laptop with Time Machine. After the next session I would again clone the 1st drive and rely on TM to continue to backup the LT.
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive).After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
Notes. Failed HDD ASD Test. A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out.
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
I noticed that Aperture 3 is priced really, REALLY low on the Mac App Store. So I made the decision to buy it. But... I already have Aperture 2 installed. So what happens when I buy Aperture 3? Does it recognize that I have Aperture 2 installed, and upgrade it, or will it install Aperture 3 alongside Aperture 2?
