Looking at blu-ray drives, I thought of an interesting question, and I just wanted to know if anyone knows the answer...why was an older standard used for the MacPro's optical bays, especially when the HDs use SATA? And I know the motherboard has sata ports, so that's not my issue. It's just kind of a pain having to use an adapter or run a cable to the motherboard if I want to use a sata blu-ray drive for example.
View 23 RepliesI need to router 4 SATA cables from each of the HDD bays into the optical bay where there will be 3 SSDs and a regular HDD. What is the recommended way to do this?
View 5 Replies View RelatedI have a Mac Pro 1,1 and I was wondering, can I use one of the sata ports behind the front fan for a sata optical drive since the one included is IDE? Also, if I use that sata port for an optical drive, can I eject it with the eject button in the OS.
Info:
Mac Pro
I'm wondering if it would be possible to fit an extra 1.8" sata ssd in my macbookpro 15" without removing the optical drive. This way i can keep my 500GB storage and move the OS to a 128Gb ssd. I was hoping to stick a 1.8" ssd on to my standard hdd. since the 1.8" is only 5mm thick. This would require a new sata cable from the motherboard to my 2.5" and to my 1.8" I'm not sure this exists. Does anybody think this is possible? or not?
View 4 Replies View RelatedHas anyone used one of the internal sata connectors to connect an optical drive? Part of me thinks that's what they were put there for, under the optical bay. I'm after a Blue Ray Drive and loads of them are SATA.
Mine is 2005 model mac mini.
Model Identifier: PowerMac10,1
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
this is an old machine, can i replace optical drive with sata hard disk 2.5'' with any size like 500GB, Internally not externally.
I have been reading and reading but I can't seem to find the answer. Im trying to figure out if the optical drive for the iMac has a slimline sata connector or a standart sata connector. Reason is I'd like to install an SSD and use an optibay adaptor.
View 6 Replies View RelatedI have never ever seen a picture of a Mac Pro with any of the two drive bays open, when/how do they open ?
View 6 Replies View RelatedI have a 08 MP and i love it except the drive bays. Removing a drive is a bitch and frankly ends up hurting my fingers by the time it lunges out of the plug. I am wondering if there is a way to use the larger drive bay holders on the 09 MP on my 08. Also how did they add the extra room for these larger drive bays for more finger room.
View 2 Replies View RelatedAs i am new to Macs I was googling a bit and came across [URL:..]it has a small part about backing up the mac regularly and mentions "Mac Pro users have extra internal drive bays which are even easier." I have a unibody Mac 13", does this have an extra drive bay that i can shove an extra HDD into? I was thinking of a 500gig.
View 12 Replies View RelatedI just placed an order for a 2.93 Quad core, a 640gb HD in bay 1, 6gb ram with a 4870 card(didn't want to buy and flash my own as this mac pro is a gift from a friend). I really want to get a 128 SSD as OS and app drive, but can't afford it. So I will just stick with the 640gb. I will most likely raid 0 two 1gb disks in bay 2 and 3 as a scratch disk for FCP, would it be a good idea to put my aperture library on there as well for faster speed? I have around 113gb of photos in my aperture library currently. Finally, I will use bay 4 as a back up for the OS and apps. I have a drobo for data storage.
View 1 Replies View RelatedI have just got a refurbished 2.8 Octo from Apple. I was glad at the first minute as it comes with an expected 16M-cache 500G HD (instead of 8M-cache 320G), as well as airport extreme card installed without additional charge. But at the same time I find out that both hard drive bays 3 and 4 are not working when I connect another three 3rd-party HDs to the machine internally. While at the same time, the original HD in bay 1 and bay 2 (which is hosting one of the three 3rd-party HDs) are working properly. Is there anything I have ignored and I should perform now to enable bay 3 and 4. Or, should I call Apple now to claim a DOA and request a replacement?
View 3 Replies View RelatedI have a 13" MacBook Pro 2011, 2.3gHz, 320GB. What connector does it have? And would SATA still work with my laptop? One more question, what are the exact dimensions of the hard disk drive bay in my laptop, the manual only says 2.5".
Info:
MacBook
Pro, Mac OS X (10.7.2)
TOSHIBA MK5055GSX 500GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Notebook Hard Drive
View 7 Replies View RelatedI am looking into buying a unibody macbook that has a solid state drive from someone. I was wondering if the drive can be replaced with a SATA drive. It has a 128Gig drive in it and just wanted to know if I had to shell out a boatload of cash to upgrade to a larger drive.
View 1 Replies View RelatedI have a MacBook Pro with a 128GB solid state. Is this SATA II or SATA III?
View 3 Replies View RelatedIm considering purchasing a higher capacity internal hardrive around the 750Gb/1Tb mark. However my macbook is the early 2008 model, and it seems the majority of hardrives are SATA II, having speeds of 3Gbt, which my mother board may not be capable of (apparently only 1.5Gbt) From researching and reading some reviews of others who have purchased internal drives on Amazon UK, some have had difficulty due to this problem, but have been able to fix the issue with a firmware update reducing SATA II drive speeds to 1.5Gbt.
Questions I have: Do all SATA / SATA II internal hardrives need a firmware update if replacing on to a new computer?(If so, would I need to look for a specific firmware update for the specific drive I intend on buying? And if you're in the knowledge would you mind posting links to these updates?)What is the process of updating the firmware i.e. would I need to put firmware on external usb hardrive 1st, then upload it to macbook after installing new internal drive (if it boots up my OS that is) etc. Would a 'hybrid' (disk+solid state) drive be compatible with a macbook as old as mine?Do I need to update my operating system to OS X Lion first, or can it be done after installing the drive?
my current laptop hardware:
Macbook Pro 15.4" (Early 2008 Model)
Intel Core 2 Duo 2.4Ghz ProcessorGeForce 256Mb 8600M GT Graphical Processor
Intel ICH8_M AHCI 1.5 Gbt MotherboardToshiba MK1655GSXF 160Gb 2.5" Hard DriveOperating System: OS X Leopard 10.5.8
Info:
MacBook Pro, Mac OS X (10.5.8), 15.4" 2.4Ghz (Early 2008 Model)
I was wanting to install a Blu-ray drive in my Mac Pro to play movies in bootcamp on my ACD (I know it doesn't have HDCP).
What I was wondering if any one had installed a SATA Blu-Ray drive using an IDE converter and if that works alright?
We have i-Mac 20" with built in i-sight Power PC, one of last ones I think before the intel. We have had a few problems before with it powering down and going to sleep. Used to hoover dust out and that seemed to fix it.
Now it won't start at all. I have tried all the PRAM and various commands to re set various things but none of these work. We had a wireless keyboard and I have just tried a wired one but I do not think either are connecting as the tab key light does not come on, which it does when I tested the wired on on my lap top.
When it died it crashed with a cd in drive. I have removed this and replaced it with the mac install disk to try and run the disk check but the optical drive is not starting at all either.
All that happens on start up is the sleep light comes on, then after a few moments fan starts to whirl. I can't hear the hard drive - have tried to rock hard drive to get it to spin but nothing.
Just wondering whether worth trying to replace optical drive or is this being controlled by hard drive - hence its not working nor hard drive. is there any way to recover data if it is the hard drive that is dead? anything else I can try and replace to fix it? could I use an external optical drive connected via USB to start?
I have tried to firewire but not joy their either!
I just bought a new Mac Pro 6-core and an OWC 120Gb SSD drive. My question is putting the SSD on optical drive bay or Hard disk drive bay, is there any difference in performance? My understanding from my old PC is never to share the SATA cable with the optical drive as it will take the transfer speed of the optical drive, because they are running in the same "channel"?Is the 2 SATA cable in the optical drive bay 2 separate distinct ports/channel?
View 6 Replies View RelatedI am wondering if anyone knows where I can get the screws that go in the side of the hard drive and the standoffs (screws) for the bottom of the optical drive for a Power Mac G5.
The hard drive needs screws so it will slide into and sit in the case properly.
I bought a Pioneer DVD drive to replace the original Sony SuperDrive. Apparently, there are different sized standoffs for Pioneer and Sony drives. With the Sony standoffs on the Pioneer drive, the tray scrapes the case when it ejects.
I did a search but couldn't find any specific info as related to the 20" (late 2006) iMac. Basically, I do a lot of audio work with Logic and DP and I'm interested in replacing my 20" iMac's optical drive with a second internal hard drive. If anyone has any experience or insight regarding this, I would greatly appreciate your input. About 6 months ago, I did a DIY replacement of my iMac's internal hard drive (upgrade to 1 tb), so I'm pretty sure I'd like to DIY an optical drive / hard drive swap - that is, if it's 1) Proven to work stably (thermally and otherwise) 2) Not going to require the iMac's fan to be running faster/louder than normal Looking at my iMac's system profiler, the DVD drive is on an ATA bus (which, as I remember it, is slower than S-ATA). What kind of transfer rates do you think one could realistically expect with a hard drive on this ATA bus? Also, would I have to be careful about new hard drive compatibility, or are S-ATA and S-ATA II backwards compatible with ATA?
View 1 Replies View RelatedMy slot leading super drive has just quit ejecting the cd inside. I tried 5 different ways to eject it but none work.
Info:
MacBook Pro (13-inch Mid 2010), iOS 7.1
I'm looking for a new HD to replace the original, now failing Maxtor drive in my G5 tower (1.8 Ghz dual processor, purchased in Aug. 2004), and have just about settled on the Western Digital Caviar SE16 series. It seems there are two types -- SATA and SATA II -- and I'm not sure about how to make a decision on which particular WD model to buy.
Will either type work in my machine? Or would the SATA II have potential compatibility problems? I read somewhere in these forums that someone with a G5 had bought an SATA II drive, and it wouldn't run with his system. (He said he had to reset some jumper switches to reduce the transfer rate of the drive ??, but now I'm told elsewhere that SATA drives don't have jumper switches.
Information:
1.8 DP G5, 1.5 GB RAM w/ Superdrive
Mac OS X (10.3.x)
I just bought a 500gig WD Caviar SATA hard drive for my Mac Pro. When it is being written to it creates noise in my speakers. I've had this problem with external hard drives before (Seagate) and thought I'd be avoiding this by going with an internal drive.
Could I have installed it incorrectly? Is there anything I can do, or should return it and see if I have better luck with a new one?
When I sold my old desktop PC i took out the SATA hard drive (WD1600JS). My question is how can I access that drive without buying a external drive enclosure? What cables will I need? I just want to hook it up and see what's on it and completely erase the drive so I can give it away. I don't even have to see what's on it, i'm more concerned with erase the info. I have access to a PC at work if this has to be done with a PC and not my MBP
View 2 Replies View RelatedI was thinking of removing my DVD Superdrive and adding a SSD drive. Will I be able to put the DVD drive in an enclosure and use it as an external drive?
View 5 Replies View RelatedI read this somewhere but i cant seem to find it anywhere on google.
View 4 Replies View RelatedI recently performed an optical drive install. Had to remove the hard drive bays (I use three hard drives - Luckily, 2 run OSX). I carefully removed all three drive bays and the empty bay. When I inserted the drives into the computer I had changed the position, swapping one OSX drive with a different one and reversing the drive bays. On restart, the computer started on the drive I had not selected for startup and I received an error message stating the other drive could not mount and it gave three options (Initialize - Ignore and Eject).
I can see the drive in Disk Utility and repair the permissions (it's also located in the System Profile).
I tried a few things I read in the community using various Terminal commands but was unsuccessful.
(Let me point out that I recently switched from a PPC G5 to MacPro and swapped the drives from PPC into MacPro and all has been fine until I removed changed their positions in the bays)
Info:
Mac Pro, Mac OS X (10.5.8)
I'm thinking of upgrading my HDD on my new Mac Mini(2.0 GHz Core 2 Duo) and I'm wondering if this is possible. I would like to clone the old to the new without having to buy a USB or Firewire to SATA adapter. Would it be possible to disconnect the Super Drive(CD/DVD) and connect up the new drive, use Super Duper to clone, then replace the old with the new and reconnect the Super Drive?
I've searched the forums to see if anyone has tried this but I didn't find anything. I'm not even sure if there is a second SATA port that would work for a HDD. I know the Super Drive is a SATA because it's listed when I look at system info.
I've seen a lot of folks using USB or Firewire to do this so that's my backup plan but it would seem if I can get both drives connected this would be pretty straight forward.
