I seem to almost complete the upgrade and then it does the final reboot to comlete installation and then I get the blue screen which appears due to a display device issue.. I have 1.1 MP with a 7300gt video card in it
View 2 RepliesAfter windows is installed a Blue screen appears with cursor on screen but it freezes completely.I can fix this by restarting my mac , then once windows restarts i insert the Mac OS disc , select the disc within my computer but the following message appears "Package requires new version of installer"
View 8 Replies View RelatedI have a problem with my MacBook screen. Everytime I try to turn on the MacBook, the blue screen appears for a second and then everything gets dark (but I can see that the computer turned on normally, it's just the screen that gets almost black, without light). Sometimes only the right side of the screen is blue and then gets dark just like the left one. I was looking for the problem and I perceived that the left side seems to be loose and I can't fix it. What should I do?
View 2 Replies View RelatedSo, whilst it was installing bootcamp 3.1 it blue screens and now when it boots and complains about pci.sys.
View 2 Replies View RelatedA few months ago, I bought a macbook pro and it was doing fine. But recently, every time it starts, a blue screen appears for a split second then it goes to log- in. Then, every time I shutdown, it will also show up for a split second then shutdown. It doesn't affect the computer but I'm just wondering how to stop it.
Info:MacBookPro, Mac OS X (10.7.3), blue screen
ok my macbook wont boot. i hit the power button, i hear the cd drive move, grey screen comes up with the apply logo and the little progress loading spinner thing, boot sound rings, then it goes to a dark blue screen for a second then it turns a lighter blue and the cursor is there and i can move it around, and then nothing happens it just sits there
i tried holding command/option/p/r till i heard the boot noise twice then let go and it stopped at the blue screen again. i didnt download anything new or change any permissions or system settings, just powered off last night and went to turn it on this morning and this happened
I have an iMac 21inch, Late 2009. I found after it was runing really slow that my hard drive was failing. It told me there were SMART errors on the drive. The computer is out of warranty and I'm in the middle of no where so i have no Mac store to take it to. I bought a new drive, same model, and installed it into the computer. It turns on fine, but after the Apple logo and spinning coge wheel the screen flashes, shows the blue back ground like its going to load the desktop and then goes black.
I've tried connecting an external monitor to it and shows up like an extended display. I've tried connecting it to another Mac, a Mini, and the Mini can boot off the iMacs hard drive just fine. If it Target Disk mode the Mini and boot the iMac I get the same flash of blue desktop then it goes black.
This is where it gets weird though, I'm sure your thinking, ok the screen is going bad... BUT, I boot off an Ubuntu CD, or the AHT disk and it loads fine and has no turning black. Its only when booting into the Mac OS or the installation disk.
One last note is that when its at the black screen and I'm sure its loaded the desktop, if I hold the power button down for about 3-4 seconds, till I hear a click. I then press the button again right away and the screen flashes on showing me the desktop and everything, for about 2 seconds...
There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?
Info:
MacBook Pro, Mac OS X (10.7.4)
Ok guys, so here is the story, i just bought the 500 GB Blue Scorpio, ran the Time Machine back up on an external hard drive and wanted to install the 500 GB on my macbook, inserted the Mac OS CD and in the section where it asks where you want to install the Mac OS, i didnt see anything it was blank and it didnt give any options or anything.so now i installed the old hard drive and i am using that one, what am i supposed to do ?
so i go to turn my imac on tonight and it makes the normal noise when it always turns on but the screen stays blank(light blue)....after about 2 minutes this little picture of a folder with a question mark shows up in the middle of the screen. it keeps making this clicking noise as well. ive tried unplugging everything and restarting it here is a pic of what the thing that pop ups looks like [URL]
View 8 Replies View RelatedI have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.5.1)
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
View 14 Replies View RelatedI Have my 15" macbook pro 2,4 Ghz 2G in RAM, with Snow Leopard, bootcamp and vista running for some time (about a year or so) and every thing has been going ok. Last night I made a clean windows 7 installation. All went good, installation, let windows 7 make his updates, I put Snow Leopard disk to make macbook pro drivers updates and I installed all the program I need including Norton 2010 Antivirus.
All went smooth and easy untill I activated Windows 7 with Daz Windows Loader 1.6.9. After a few seconds It said : Everything Ok, Windows is now activated and your machine will reboot now. After that, it gets out of the desktop to the closing window and suddenly I get the blue death screen. I have to manually press de power button to shut down my macbook pro.
I reboot again and after getting the safe mode screen stuff i just keep with Start Windows normally. It starts well again, but now each time I want to reboot or shut down my MBP I get again and again the blue death screen. And I�m sure i will get it while working soon.Is it probably because I did all kind of updates before running the Daz Loader (including programs and antivirus software)??
I have iMac 27 and screen problem on start up i have blue vertical lines, when it start i have a lot of blue dots and nothing else. when I connect outside monitor its showing the same.
Just installed lion and still the same problem when it starts blue dots, when startup in safe mode loads of blue lines and dots on the screen.
Info:
iMovie (iOS), Mac OS X (10.7.3)
iMac 27" i7 with OS X v 10.6.x when I create the bootcamp partition for windows 7 and I install from my original DVD of Windows 7. I format the partition during the install of windows 7 and on the first reboot after windows 7 first part of the install, the screen shows the Windows 7 logo and says continuing installation and then a black screen and then nothing.
I have to hard power off the iMac and then it starts over says the thing about the system didn't shut down properly and gives me the option to start safe mode etc. and does the same thing each time.
Just installed windows 7 on my imac, the only problem is that at the lowest brightness (set via keyboard and boot camp utility) the screen is too far bright!! Is there a way to low brightness via software?
View 4 Replies View RelatedJust did a fresh install of Windows 7 RC onto my Boot Camp partition. Using VMWare's Fusion (v2.0.4) to load Windows 7 up on my Mac. However, it blue screens as soon as the Windows 7 logo appears during boot.
I have it set up to emulate "Windows 2008 Server x64" as detailed in VMWare's post to get Windows 7 working.
What's going on..? Any ideas how I can sort this out?
I have a new IMac and I installed vista via bootcamp, when I start up vista I am getting a blue error screen that flashes so fast i cant even ready it... then the computer shuts down. When I restart it again it goes to the page that gives me the choice to safe start or start normal. Sometimes it will let me go to windows and work fine but there have been times when it just does that over and over again. Does anyone know what this is caused from? I guess I'll have to reformat or something. If I continue to use my computer this way will it wreck something?
View 12 Replies View RelatedI just picked up a Mini display port to DVI adapter for my Macbook Pro so that I could hook it up to my 32 inch 1080p tv that I use as my main desktop monitor. It works just great in OSX (though for some odd reason I have to put the laptop to sleep then plug it in for it to work correctly. Can't be on or off otherwise I don't get the full picture not sure why) but in bootcamp it instantly causes a blue screen. If I plug it in then reboot to windows I get a blue screen even before its loaded windows all the way. I assume this is a driver issue but I'm using the latest boot camp drivers.
View 3 Replies View RelatedJust got the new iMac quad core i7, purchased Windows 7 Home Premium and having trouble getting it to install using Boot Camp it goes through all the steps I partitioned 350 gig then formatted went thorough the install steps, it reboots and finishes the install, then reboots but nothing happens its just a black screen
View 3 Replies View RelatedI have a problem with my windows partition. Every time it boots the blue beam stops in the middle and a blue screen appears, which I can't read because it disappears too fast. And than the computer restarts again. I also tried the safe mode but it didn't help either. So my question is: Can I fix windows from my mac partition?
View 3 Replies View RelatedI have a 1st generation macbook pro running snow leopard 10.6. I've been trying to install windows xp, vista, or 7 using bootcamp but for some odd reason i cannot boot into the cd. I put the cd in and made sure the macbook is reading it (which it is because the icon shows up on the desktop) before i hit "start installation". the laptop would restart but it doesnt boot into the cd, it just goes right into the gray screen and stays there while i hear the cd spinning. I've installed windows xp using this method but that was about 4 years ago, for some reason the hard drive died on me so i have to do this whole process over again. I dont recall having this problem either.
View 3 Replies View RelatedWhen I have no other internal drives connected I have no problems with Windows 7 loaded in boot camp. But when I connect my other 4 internal drives (in bay 2, 3, 4 and optical bay 6) which are set up as a Raid 0 configuration for Snow leopard I run into problems- I get a blue screen of death almost instantly when I start to move the cursor in windows 7. Seems like if there was a way to tell Windows 7 to ignore the 4 other drives then it would work fine? I don't want to have to pull them from the machine each time I start in windows 7.
View 2 Replies View RelatedI am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation
triple boot snow leopard, windows 7, & ubuntu
I have done the following:
1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt
I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here:
Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
I am new to Mac. I don't know what to do. When I am surfing or emails...some images not show up. Symbol with blue box with ? inside box and no images. Why?
I bought it about couples months ago and my computer is Snow Leopard and 24 inch.
while i am using my macbook the screen will suddenly go blue and flash between different blue colors like it is trying to work. sometimes it comes back on but most of the time it stays like that. I have to force shut down with the button and then restart...about half the time it is still flashing blue after the restart and if it does work, it goes blue eventually.
dont know if its a problem with the screen or what because the computer continues to work...if there is a movie on, you can here it in the background and the screen just flashes.
Everytime I start skype while in windows, the computer crashes and I get the blue screen... I think it has to do with the sound drivers, because when I'm using msn messenger also in windows suddenly the microphone mutes itself.
I tryed updating the realtek drivers with no help, updated skype, no help, I uninstalled the realtek drivers and the laptop did not crash anymore but I had no sound, any advice like for example how to get the microsoft drivers to work on the laptop without using realtek??
For whatever reason with the microsoft drivers,I think the sound is trying to come out of the digital outlet, I can see the ligth inside the jack, but nothing comes out of the laptop's speakers...
By the way, the vista version is Home basic.
I've used Boot Camp to create a 32GB partition and install Windows XP (SP2 home edition) on my alu iMac (2.66 Ghz, 4GB RAM).
I used the FAT format to allow transfer of files between the Mac partition and the Windows one.
After booting Windows, I put in my original Leopard install DVD as directed, and the Boot Camp installer automatically came up.
Won't boot up past this screen, this is the first time this has happened. I am fairly certain it is related to an attempt to install SP3 (I had removed it in favor if SP2 to hopefully fix some wireless issues). I noticed when I shut it down last time that it was installing updates, which most certainly included SP3, and then I left the computer. Maybe the install failed? If so, how can I fix this? Any way around other than reverting to a backup? (I think the clone I have of it has SP3 on it)
View 6 Replies View RelatedSo, I was on windows, using bootcamp, and I was creating partitions on a pen drive with it, and then it asks me that it needs to restart to apply changes.
But then, while restarting, a blue screen occurred (**** windows).... And I forced the shutdown pressing the power key.
Then, I simply turned the MacBook on, trying to boot on my snow leopard and I got a flashing folder with a question mark on it. Now I can't access any partitions on it, if I press option key on startup I get a blank window!
I tried to reset PRAM, repair the MacOs partition using the snow leopard DVD (it shows up fine, along with windows partition and EFI partition), and I still don't get my startup disk showing up...
Info:
MacBook Pro, Mac OS X (10.6.8), Snow Leopard with windows7 bootcamp
