Windows On Mac :: Blue Screen Crash Only When Other Internal Drives Connected?
Dec 28, 2010
When I have no other internal drives connected I have no problems with Windows 7 loaded in boot camp. But when I connect my other 4 internal drives (in bay 2, 3, 4 and optical bay 6) which are set up as a Raid 0 configuration for Snow leopard I run into problems- I get a blue screen of death almost instantly when I start to move the cursor in windows 7. Seems like if there was a way to tell Windows 7 to ignore the 4 other drives then it would work fine? I don't want to have to pull them from the machine each time I start in windows 7.
View 2 Replies
ADVERTISEMENT
Mar 21, 2009
I've used Boot Camp to create a 32GB partition and install Windows XP (SP2 home edition) on my alu iMac (2.66 Ghz, 4GB RAM).
I used the FAT format to allow transfer of files between the Mac partition and the Windows one.
After booting Windows, I put in my original Leopard install DVD as directed, and the Boot Camp installer automatically came up.
View 5 Replies
View Related
Jan 3, 2011
I keep getting the following error 3 quarters of the way:
STOP: C000021A "Fatal system error. The windows subsystem process terminated un expectedly w/ a status of OX C000005. System shut down. It's a blue screen with white letter.
I'm using Office XP Service Pack 2 with imac OSX Install DVD version 10.6.3.
The steps I'm taking are:
Log onto my mac and use pre installed bootcamp to partition the drive. I'm using 32GB of space. Then I use my xp Prof w/ service pack 2 cd to install xp. At this time everything is working fine except for the missing drives. Then I put the bootcamp cd that came with my imac into the iMac and run bootcamp. It looks like everything is working perfectly. The imac is finding wireless internet and all the drives look like they are working fine until out of no where a blue screen pops up and states what I wrote below. There is nothing else on the screen. I'm using a 27 inch imac that i bought about 5 weeks ago new.
View 6 Replies
View Related
Sep 28, 2009
I am on a brand new 3.06 GHz iMac. Installed Snow Leopard, 10.6.1. In general I don't experience any of the problems other people seem to have. But twice now my screen has turned blue while I am in the middle of something. All the open apps disappear and the Finder seems to relaunch. It only takes a few seconds. I don't have steps to reproduce it. Both times I had several apps open and had video/DVD running in the background.
Has anybody seen this?
I am a notorious file-saver which means I haven't lost much work through this but if it keeps happening I might have to go back to Leopard.
View 18 Replies
View Related
Jul 4, 2009
The first time I connected to my HDTV using a mini displayport-dvi and a dvi-hdmi adapter, it worked flawlessly. Stupidly, I set my TV to a resolution it couldn't support. Now the screen only turns blue until System Preferences eventually crashes and the TV gets no signal.
I've tried clearing my PRAM, deleting the profile in the colorsync folder, and even deleting /Library/Preferences/com.apple.windowserver.plist out of desperation. I've confirmed that it's not a problem with the adapters by successfully getting another HDTV to work. Where could could OS X be storing the display's settings?
View 3 Replies
View Related
Jun 6, 2010
I have a 27" iMac and an LG 47" 1080p HDTV. I just bought the Griffin Video Display Converter, which is certified by Apple to pass both video and audio from the mini display port on the late 2009 iMacs. Whenever somebody turns on the HDTV the iMac's screen flickers the color blue on and off, sometimes staying that way permanently. Permanently the color blue that is. The only way to get out of it is to turn the iMac off and then back on (restarting it).I have the ?Mirror Displays? checkbox checked in the ?Display Preferences?. When I uncheck that box it treats the connected HDTV as an extension to the iMac display, whether the HDTV is on or off, which makes my cursor disappear off one side of the screen. This is why I leave mirroring on.
View 5 Replies
View Related
Jan 18, 2010
After windows is installed a Blue screen appears with cursor on screen but it freezes completely.I can fix this by restarting my mac , then once windows restarts i insert the Mac OS disc , select the disc within my computer but the following message appears "Package requires new version of installer"
View 8 Replies
View Related
Nov 12, 2009
I Have my 15" macbook pro 2,4 Ghz 2G in RAM, with Snow Leopard, bootcamp and vista running for some time (about a year or so) and every thing has been going ok. Last night I made a clean windows 7 installation. All went good, installation, let windows 7 make his updates, I put Snow Leopard disk to make macbook pro drivers updates and I installed all the program I need including Norton 2010 Antivirus.
All went smooth and easy untill I activated Windows 7 with Daz Windows Loader 1.6.9. After a few seconds It said : Everything Ok, Windows is now activated and your machine will reboot now. After that, it gets out of the desktop to the closing window and suddenly I get the blue death screen. I have to manually press de power button to shut down my macbook pro.
I reboot again and after getting the safe mode screen stuff i just keep with Start Windows normally. It starts well again, but now each time I want to reboot or shut down my MBP I get again and again the blue death screen. And I�m sure i will get it while working soon.Is it probably because I did all kind of updates before running the Daz Loader (including programs and antivirus software)??
View 1 Replies
View Related
Mar 29, 2012
I have iMac 27 and screen problem on start up i have blue vertical lines, when it start i have a lot of blue dots and nothing else. when I connect outside monitor its showing the same.
Just installed lion and still the same problem when it starts blue dots, when startup in safe mode loads of blue lines and dots on the screen.
Info:
iMovie (iOS), Mac OS X (10.7.3)
View 2 Replies
View Related
May 13, 2009
Just did a fresh install of Windows 7 RC onto my Boot Camp partition. Using VMWare's Fusion (v2.0.4) to load Windows 7 up on my Mac. However, it blue screens as soon as the Windows 7 logo appears during boot.
I have it set up to emulate "Windows 2008 Server x64" as detailed in VMWare's post to get Windows 7 working.
What's going on..? Any ideas how I can sort this out?
View 4 Replies
View Related
May 13, 2009
I have a new IMac and I installed vista via bootcamp, when I start up vista I am getting a blue error screen that flashes so fast i cant even ready it... then the computer shuts down. When I restart it again it goes to the page that gives me the choice to safe start or start normal. Sometimes it will let me go to windows and work fine but there have been times when it just does that over and over again. Does anyone know what this is caused from? I guess I'll have to reformat or something. If I continue to use my computer this way will it wreck something?
View 12 Replies
View Related
Dec 31, 2009
I just picked up a Mini display port to DVI adapter for my Macbook Pro so that I could hook it up to my 32 inch 1080p tv that I use as my main desktop monitor. It works just great in OSX (though for some odd reason I have to put the laptop to sleep then plug it in for it to work correctly. Can't be on or off otherwise I don't get the full picture not sure why) but in bootcamp it instantly causes a blue screen. If I plug it in then reboot to windows I get a blue screen even before its loaded windows all the way. I assume this is a driver issue but I'm using the latest boot camp drivers.
View 3 Replies
View Related
Jan 6, 2010
I seem to almost complete the upgrade and then it does the final reboot to comlete installation and then I get the blue screen which appears due to a display device issue.. I have 1.1 MP with a 7300gt video card in it
View 2 Replies
View Related
Mar 8, 2009
I have a problem with my windows partition. Every time it boots the blue beam stops in the middle and a blue screen appears, which I can't read because it disappears too fast. And than the computer restarts again. I also tried the safe mode but it didn't help either. So my question is: Can I fix windows from my mac partition?
View 3 Replies
View Related
Sep 17, 2010
while i am using my macbook the screen will suddenly go blue and flash between different blue colors like it is trying to work. sometimes it comes back on but most of the time it stays like that. I have to force shut down with the button and then restart...about half the time it is still flashing blue after the restart and if it does work, it goes blue eventually.
dont know if its a problem with the screen or what because the computer continues to work...if there is a movie on, you can here it in the background and the screen just flashes.
View 2 Replies
View Related
Feb 19, 2009
Everytime I start skype while in windows, the computer crashes and I get the blue screen... I think it has to do with the sound drivers, because when I'm using msn messenger also in windows suddenly the microphone mutes itself.
I tryed updating the realtek drivers with no help, updated skype, no help, I uninstalled the realtek drivers and the laptop did not crash anymore but I had no sound, any advice like for example how to get the microsoft drivers to work on the laptop without using realtek??
For whatever reason with the microsoft drivers,I think the sound is trying to come out of the digital outlet, I can see the ligth inside the jack, but nothing comes out of the laptop's speakers...
By the way, the vista version is Home basic.
View 5 Replies
View Related
Aug 13, 2009
Won't boot up past this screen, this is the first time this has happened. I am fairly certain it is related to an attempt to install SP3 (I had removed it in favor if SP2 to hopefully fix some wireless issues). I noticed when I shut it down last time that it was installing updates, which most certainly included SP3, and then I left the computer. Maybe the install failed? If so, how can I fix this? Any way around other than reverting to a backup? (I think the clone I have of it has SP3 on it)
View 6 Replies
View Related
May 10, 2010
got a problem, after i bought the new macbook pro 13'':
i noticed that the fan speed is always about 2000rpm... doesn't matter, whether the temperature is at 40�C or at 70�C or 80�C (my mbp doesn't get hotter)... always same rpm.
is that normal? additional info: i downloaded istat menus 3 which has the option to control the fan speed (i deactivated it... no changing... always 2000rpm). did istat crash the internal fan speed control?
View 24 Replies
View Related
Feb 9, 2012
So, I was on windows, using bootcamp, and I was creating partitions on a pen drive with it, and then it asks me that it needs to restart to apply changes.
But then, while restarting, a blue screen occurred (**** windows).... And I forced the shutdown pressing the power key.
Then, I simply turned the MacBook on, trying to boot on my snow leopard and I got a flashing folder with a question mark on it. Now I can't access any partitions on it, if I press option key on startup I get a blank window!
I tried to reset PRAM, repair the MacOs partition using the snow leopard DVD (it shows up fine, along with windows partition and EFI partition), and I still don't get my startup disk showing up...
Info:
MacBook Pro, Mac OS X (10.6.8), Snow Leopard with windows7 bootcamp
View 1 Replies
View Related
Jan 1, 2010
I just got a new mid 09 macbook pro no matter how I calibrate the screen. the dark/deep blue will always look like purple colour.
View 4 Replies
View Related
Jun 13, 2009
What is everyones experience with the wd 2 tb internal drives for the mac pro. I'm planning on purchasing 6 and software raiding them and I've been reading reviews on sites like newegg that say they're not working out well for some people. So I wanted to know how it was going for those that purchased them for their macs.
View 22 Replies
View Related
Nov 5, 2010
First replace the Optical drive (superdrive is superdead) in my 2007 macbook with a SSD, probably a 128-240GBish, the current internal drive is a 5400rpm 500GB. I want to install the OS and a couple of the main programs I use on the SSD. The main question is what will the the time capsule do when trying to restore to the (smaller GB )SSD if the backup image (currently around 400 GB) is from the 500GB. Is there a better way to go about this? The HDD has about 100GB available. If there is a forum on this let me know.
View 1 Replies
View Related
Jun 22, 2008
Does anyone know if the internal SATA drives on the MacPros are hot swappable?
View 2 Replies
View Related
Jun 27, 2009
I have a weird, and hopefully silly, question. I searched and searched both here and on the Apple website but couldn't find an answer, so here goes. I recently installed my OS onto a new OCZ Vertex SSD in my new Octo Mac Pro. Everything is mostly fine but I get occasional 'hang ups' when I go into my system preferences and attempt to change settings (I migrated the install from the stock drive that Apple sent me, so my next step is to delete the OS from my SSD and do a fresh install from scratch to see if that solves things).
My question is, does it matter, physically speaking, where my system drive is located within the order of the drive bays? I.E. does my system drive need to be the first disk in the bays or can it be the third or fourth disk? Does this effect performance at all?
View 3 Replies
View Related
Dec 13, 2010
Does anyone know if the internal SATA drives on the MacPros are hot swappable?
View 3 Replies
View Related
Mar 23, 2008
Does anyone know when we can expect 1.5GB and 2GB internal 3.5" hard drives? Which manufacturer will most likely be the first one out?
View 4 Replies
View Related
Jan 18, 2009
I'm in a Concatenated Array with my two internal drives - can I still use Boot Camp? I'm wanting to play with the Windows 7 Beta.
View 4 Replies
View Related
Feb 19, 2009
I'm currently using the 2TB drive as my time machine backup and the other drives for mostly media files (lots of movies, tv shows, etc.). What I would like to do is combine the non-backup drives to show up as a single drive in leopard. Is this possible? RAID 0 is out of the question since they're different sizes. Is there a way in Disk Utility to do this?
View 2 Replies
View Related
Oct 17, 2009
I have an (Early 2008) Mac Pro in standard configuration. The hard drive is just about full and would like to add a second internal hard drive.
I have read that some people choose to keep just the OS on one hard drive and everything else on the drive. Is this the best way to go? Which hard drive would the applications go on (with the OS?)?
The main use of this machine is for graphics (Adobe CS3 and Aperture).
View 2 Replies
View Related
Feb 25, 2012
On a Power Mac G4 desktop with 10.4 OS I have 2 hard disks. One is the system drive, the other is empty. I'd like to link the empty drive to double the capacity of the system hard drive, thus making the two a single virtual hard drive.
Info:
G4, Mac OS X (10.4.2)
View 2 Replies
View Related
