I've used Boot Camp to create a 32GB partition and install Windows XP (SP2 home edition) on my alu iMac (2.66 Ghz, 4GB RAM).
I used the FAT format to allow transfer of files between the Mac partition and the Windows one.
After booting Windows, I put in my original Leopard install DVD as directed, and the Boot Camp installer automatically came up.
When I have no other internal drives connected I have no problems with Windows 7 loaded in boot camp. But when I connect my other 4 internal drives (in bay 2, 3, 4 and optical bay 6) which are set up as a Raid 0 configuration for Snow leopard I run into problems- I get a blue screen of death almost instantly when I start to move the cursor in windows 7. Seems like if there was a way to tell Windows 7 to ignore the 4 other drives then it would work fine? I don't want to have to pull them from the machine each time I start in windows 7.
View 2 Replies View RelatedI am on a brand new 3.06 GHz iMac. Installed Snow Leopard, 10.6.1. In general I don't experience any of the problems other people seem to have. But twice now my screen has turned blue while I am in the middle of something. All the open apps disappear and the Finder seems to relaunch. It only takes a few seconds. I don't have steps to reproduce it. Both times I had several apps open and had video/DVD running in the background.
Has anybody seen this?
I am a notorious file-saver which means I haven't lost much work through this but if it keeps happening I might have to go back to Leopard.
getting really annoyed here, installed snow leopard on 24" iMac 2.66 GHz Intel Core 2 Duo and all seems to go ok until it restarts
it just hangs on the blue screen for hours and hours, even a power off/on results in the same problem
i can boot into safe mode no probs, but always end up on hanging blue screen when i reboot (safe mode ok)
deleted all login items etc, but still no go
not running any haxies either
I installed snow leopard on my iMac. Everything seemed to go ok. It took about 45 minutes to install and it restarted but now it sits on a blue screen. What gives?
View 3 Replies View RelatedI have iMac i5 27" 2011. The screen crash and tell me to restart.
Info:
iMac, Mac OS X (10.7.3), screen crash and tell me restart
The first time I connected to my HDTV using a mini displayport-dvi and a dvi-hdmi adapter, it worked flawlessly. Stupidly, I set my TV to a resolution it couldn't support. Now the screen only turns blue until System Preferences eventually crashes and the TV gets no signal.
I've tried clearing my PRAM, deleting the profile in the colorsync folder, and even deleting /Library/Preferences/com.apple.windowserver.plist out of desperation. I've confirmed that it's not a problem with the adapters by successfully getting another HDTV to work. Where could could OS X be storing the display's settings?
some reason my Macbook Pro 15' inch won't start up. It's stuck at the blue loading screen after the gray Apple. The screen switches from two blue colors every 5 seconds or so along with a loading symbol. Sometimes I can see my mouse and use it, but that's all what is happening. The last thing I did was installing the newest video driver on my Boot Camp. (Windows 7 - 32bit and Leopard 10.5 for mac)
I can still start up Windows 7 without a problem on Boot Camp, so it doesn't seems a hardware issue. I already tried some stuff found on the internet, but I can't start up 10.5 in normal or safe mode.
Mac OS X 10.4 Surfing, then all of a sudden got a message saying "you need to restart your computer"
so i restart and now i have a blue screen, with nothing on it, i'd let it sit for about 15mins then it goes to a black screen that has my computer name and asks for login and password info.
Everytime I turn it on I get a black box asking to shut down or restart the mac. I have managed to get it to turn on to powersave and managed to update the software. Thought it might help but just made it worse - it won't boot up at all now past an apple symbol with a little swirly thingy underneath (I apologise now for my lack of intelligence when it comes to computers/knowledge/names of things!) The first time I managed to boot the computer up it came up with the grey screen and a little folder flashing between a face and a question mark which I assume meant it couldn't find anything but that appears to have gone away now. I bought this computer new from Apple about 2 - 3 years ago and no disks were provided with it.
View 3 Replies View RelatedMy MacBook Pro warned me that it had no disk space left. I deleted some files and then restarted the computer. Now it will not turn back on completely. Will only show a Blue Screen...
Info:
MacBook Pro
I have a problem with the Sigmatel High Definition Driver for Windows XP SP3 on Boot Camp. It does not install
I've downloaded the driver from [URL] , but when I run the file in Windows XP on Boot Camp, the following error message shows up:
"Device Object not found..."
When I go to 'Device Manager' in Windows, it says that the sound card is not recognized at all.
Specs:
- iMac 24'
- Windows XP SP3
- Boot Camp v2.0
- Sound Card: Sigmatel (?) High Definition Audio Driver
When trying to install x64 Boot Camp drivers on my UMB, I get an error saying that my system is not supported. There is a way to force/trick the boot camp installer into installing the drivers anyway.
View 3 Replies View RelatedI installed Windows XP SP3 and it installed just fine. I went and bought the Snow Leopard OSX DVD from the Apple Store. The bootcamp installed, etc. now that I tried to install a game, it worked.
Upon start up, it's asking for Direct X, installed that as well. Then it said that it failed because I don't have the driver. I checked and the driver is non-existent for graphics.
I have a Macmini 2011 without a dvd-driver and I wanna install Windows 7 with Bootcamp. But after I downloaded all updates I have a buttom "Install", when I press it there comes: "pleace put the Windows 7 dvd in the driver", but I have no driver!
Info:Mac mini
I need to install the Canon MP520 printer to my MBP. The printer is connected to another a PC running windows and is shared. I installed the OSX driver provided on the Canon page, I can see the printer in the network printers but when I am asked to choose the driver I can't see the correct model listed. On the other hand, if I simply connect the same printer via USB, to my MBP it is recognized directly. When I'm asked to provide the driver while adding the printer via the network, there is also the option to browse to the driver location. So my question is, where are the can I find the right driver on the OS?
View 3 Replies View RelatedI tried to install counter-strike on my vmware image of windows xp pro x64 edition. The thing is that when I opened up the application, I was told that I could only run in software mode. How do play the game utilizing my geforce 8600gt graphics card?
I have already checked the box VirtualMachine->Settings->Display->Accelerate 3D graphics. So this shouldn't be the problem.
I also tried downloading a driver from nvidias web site, but I could not install it.
This is about the installation of AHCI drivers to SATA ports for Windows. AHCI drivers (Advanced Host Controller Interface klick -> [URL] Interface for Wiki) are advanced performance drivers for the SATA controller in your Mac Pro (ICH10R chips for Nehalem - ESB2 for all others). When you go to profiler in OS X and bring up ATA you will see that your disks will all be connected by AHCI protocols.
View 24 Replies View RelatedIs there any way that I can install the boot camp HFS driver on my non-Mac PCs?
Anyone know what the driver's setup file might be called, since there seems to be several boot camp setup EXEs on the Snow Leopard disc?
I can't install a printer on my iMac. When I go through system prefs, add printer, it sees the printer and manages to make it to looking for installable options then that window just hangs. I can use the computer, but the window stays and it never actually installs the drivers, i'm using a wireless connection. The same thing happened before with a previous Epson printer connecting by USB. In the end I managed to connect it to my Macbook.
View 1 Replies View RelatedAfter windows is installed a Blue screen appears with cursor on screen but it freezes completely.I can fix this by restarting my mac , then once windows restarts i insert the Mac OS disc , select the disc within my computer but the following message appears "Package requires new version of installer"
View 8 Replies View RelatedI Have my 15" macbook pro 2,4 Ghz 2G in RAM, with Snow Leopard, bootcamp and vista running for some time (about a year or so) and every thing has been going ok. Last night I made a clean windows 7 installation. All went good, installation, let windows 7 make his updates, I put Snow Leopard disk to make macbook pro drivers updates and I installed all the program I need including Norton 2010 Antivirus.
All went smooth and easy untill I activated Windows 7 with Daz Windows Loader 1.6.9. After a few seconds It said : Everything Ok, Windows is now activated and your machine will reboot now. After that, it gets out of the desktop to the closing window and suddenly I get the blue death screen. I have to manually press de power button to shut down my macbook pro.
I reboot again and after getting the safe mode screen stuff i just keep with Start Windows normally. It starts well again, but now each time I want to reboot or shut down my MBP I get again and again the blue death screen. And I�m sure i will get it while working soon.Is it probably because I did all kind of updates before running the Daz Loader (including programs and antivirus software)??
I have iMac 27 and screen problem on start up i have blue vertical lines, when it start i have a lot of blue dots and nothing else. when I connect outside monitor its showing the same.
Just installed lion and still the same problem when it starts blue dots, when startup in safe mode loads of blue lines and dots on the screen.
Info:
iMovie (iOS), Mac OS X (10.7.3)
How to install Canon MP 810 printer driver?
Info:
iMac, Mac OS X (10.6.8)
I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.5.1)
Basically, I installed Leopard on a Macbook Pro that I'd just given a new HD. What I didn't realize was that there was also an issue with the thermal grease (or excessive thermal grease as it turned out) so when I installed Leopard after replacing the HD, the thing got so hot that even though it successfully installed the OS, when I tried to restart it I couldn't. Since I was borrowing the DVD I gave it back and since I've replaced the thermal grease thereby fixing the overheating issue.
When I start up the Macbook Pro now, I get the Welcome screen movie with all the languages floating past in space, but then I get a blank black screen with a mouse pointer that ends up taking me nowhere. In Windows, you normally should keep the DVD in the drive after installing from DOS since the installation program still needs more information from it. Is this the case with Leopard? Should I ask for the DVD back again?
Ok guys, so here is the story, i just bought the 500 GB Blue Scorpio, ran the Time Machine back up on an external hard drive and wanted to install the 500 GB on my macbook, inserted the Mac OS CD and in the section where it asks where you want to install the Mac OS, i didnt see anything it was blank and it didnt give any options or anything.so now i installed the old hard drive and i am using that one, what am i supposed to do ?
Just did a fresh install of Windows 7 RC onto my Boot Camp partition. Using VMWare's Fusion (v2.0.4) to load Windows 7 up on my Mac. However, it blue screens as soon as the Windows 7 logo appears during boot.
I have it set up to emulate "Windows 2008 Server x64" as detailed in VMWare's post to get Windows 7 working.
What's going on..? Any ideas how I can sort this out?
I have a new IMac and I installed vista via bootcamp, when I start up vista I am getting a blue error screen that flashes so fast i cant even ready it... then the computer shuts down. When I restart it again it goes to the page that gives me the choice to safe start or start normal. Sometimes it will let me go to windows and work fine but there have been times when it just does that over and over again. Does anyone know what this is caused from? I guess I'll have to reformat or something. If I continue to use my computer this way will it wreck something?
View 12 Replies View RelatedI just picked up a Mini display port to DVI adapter for my Macbook Pro so that I could hook it up to my 32 inch 1080p tv that I use as my main desktop monitor. It works just great in OSX (though for some odd reason I have to put the laptop to sleep then plug it in for it to work correctly. Can't be on or off otherwise I don't get the full picture not sure why) but in bootcamp it instantly causes a blue screen. If I plug it in then reboot to windows I get a blue screen even before its loaded windows all the way. I assume this is a driver issue but I'm using the latest boot camp drivers.
View 3 Replies View Related