I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.5.1)
I have an iMac 21inch, Late 2009. I found after it was runing really slow that my hard drive was failing. It told me there were SMART errors on the drive. The computer is out of warranty and I'm in the middle of no where so i have no Mac store to take it to. I bought a new drive, same model, and installed it into the computer. It turns on fine, but after the Apple logo and spinning coge wheel the screen flashes, shows the blue back ground like its going to load the desktop and then goes black.
I've tried connecting an external monitor to it and shows up like an extended display. I've tried connecting it to another Mac, a Mini, and the Mini can boot off the iMacs hard drive just fine. If it Target Disk mode the Mini and boot the iMac I get the same flash of blue desktop then it goes black.
This is where it gets weird though, I'm sure your thinking, ok the screen is going bad... BUT, I boot off an Ubuntu CD, or the AHT disk and it loads fine and has no turning black. Its only when booting into the Mac OS or the installation disk.
One last note is that when its at the black screen and I'm sure its loaded the desktop, if I hold the power button down for about 3-4 seconds, till I hear a click. I then press the button again right away and the screen flashes on showing me the desktop and everything, for about 2 seconds...
So, whilst it was installing bootcamp 3.1 it blue screens and now when it boots and complains about pci.sys.
View 2 Replies View RelatedI have just got an old 2004 G5 and thrown a brand new hard drive in it. When i tried to install leopard (which I'm told would be the best operating system to use) it comes up with a blank blue screen!
View 14 Replies View RelatedI have 11 software updates. The machine says in need to restart to install. I am in an infinite loop where it just keeps restarting and never installing the updates.
Info:
MacBook Pro, Mac OS X (10.7.4)
i have the 13 in unibody macbook pro. 10.6 snow leopardd
all of a suddden my computer froze and i turned it off with the button. when i tried to restart it would load but would stay stuck in the blue screen. i tried out the disk snow leopard disk and when i press "c" a multi languege pop up tells me i have to "hold power button untill shut down and resart in" blah blah blah
i did a hardware test and it said everything was fine..
i dont care about this on my hard drive i just wanna get it running again
After windows is installed a Blue screen appears with cursor on screen but it freezes completely.I can fix this by restarting my mac , then once windows restarts i insert the Mac OS disc , select the disc within my computer but the following message appears "Package requires new version of installer"
View 8 Replies View Relatedmy G5 (10.5.4)in work has some HD errors (From the Disk utility program) that need to be resolved by restarting with the os CD. But The OSX Disc will not load i just get a light blue screen. Is there anyway i can fix these problems?
I set her password and set the preferences to require a password to log in.Now, if she's not at the computer a while the screensaver kicks on, and after 30 minutes it kicks the logged in profile back out to the login screen. The problem is the screensaver never resumes?Even if I set the S.C to 3 minutes, manually log out to the login screen it'll sit there and show that (never go to screensaver or powersave mode for the monitor).
View 8 Replies View Relatedmy mac book pro is giving me a blue screen, some days ago it gave me a message that the desktop has too much files how can i get it opened is there any shortcut that i can open my desktop?
Info:
MacBook Pro, Mac OS X (10.7.4)
I need to re-install this OS, but I don't have the DVD image for the disk. how to get a copy?
Info:
MacBook, Mac OS X (10.5.8)
I'm trying to setup my Mac Mini but get the grey screen with folder/question mark and I can't tell if the chips have been swapped. The brand is unfamiliar and my place hosted some creepy hackers while I was in the hospital. I'm still finding mysteries.
Info:Mac mini, MacOS X (10.5), cant identify RAM
I have a problem with my MacBook screen. Everytime I try to turn on the MacBook, the blue screen appears for a second and then everything gets dark (but I can see that the computer turned on normally, it's just the screen that gets almost black, without light). Sometimes only the right side of the screen is blue and then gets dark just like the left one. I was looking for the problem and I perceived that the left side seems to be loose and I can't fix it. What should I do?
View 2 Replies View RelatedAll I get is gray screen in start up.
Info:
Mac Pro, Mac OS X (10.6.4)
Had to force quit a number of applications to shut down computer, restarted it but froze on opening. Shut down with the power button and now it won't get past Gray screen with rotating dial (thingy)...tried the safe boot option but this seemed to get stuck after identifying some issues.
Info:
MacBook (13-inch Late 2009)
I click on the hd hard drive and change the settings to no one can read or write now I had problem to open the computer as soon I start it became gray screen so I re-stall the software and as soon I back up the computer is asking me the password I type it and can't enter after keep asking me the password is wrong
Info:iMac, Mac OS X (10.7.4)
i changed the name of the hard-drive for other reasons, and i guess i must have somehow erased the two which show up in the login box. And, i cannot locate the disks.
Info:
MacBook Pro, Other OS, no start up disk to be found
I seem to almost complete the upgrade and then it does the final reboot to comlete installation and then I get the blue screen which appears due to a display device issue.. I have 1.1 MP with a 7300gt video card in it
View 2 Replies View RelatedA few months ago, I bought a macbook pro and it was doing fine. But recently, every time it starts, a blue screen appears for a split second then it goes to log- in. Then, every time I shutdown, it will also show up for a split second then shutdown. It doesn't affect the computer but I'm just wondering how to stop it.
Info:MacBookPro, Mac OS X (10.7.3), blue screen
since installing sl, my imac itself works fine however i am stuck with a solid blue wallpaper. everytime i try and change it, it goes back to blue screen within 30 seconds or so. not a crashing problem like others have faced, but annoying nonetheless. got to second level of apple support and still could not figure it out. anyone have any ideas?
View 3 Replies View Relatedok my macbook wont boot. i hit the power button, i hear the cd drive move, grey screen comes up with the apply logo and the little progress loading spinner thing, boot sound rings, then it goes to a dark blue screen for a second then it turns a lighter blue and the cursor is there and i can move it around, and then nothing happens it just sits there
i tried holding command/option/p/r till i heard the boot noise twice then let go and it stopped at the blue screen again. i didnt download anything new or change any permissions or system settings, just powered off last night and went to turn it on this morning and this happened
I have a 2006 Mac Mini using Snow leopard OS X 10.6.8.It will start up to show the 2 User accounts that are set up however when one of the accounts is selected all that appears is a totally blue screen with only my mouse curser working on it. Is there a fix for this?
Info:
Mac mini, Mac OS X (10.6.8)
After upgrading from Leapard to Snow Leapard a few weeks ago on my macbook there has been a blue screen flashing before the login screen. Is this normal? Or am I being peranoid? could it be that i installed app cleaner? I unistalled app cleaner and it still did the same.
Info:MacBook, Mac OS X (10.6.8)
There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?
Info:
MacBook Pro, Mac OS X (10.7.4)
I am on a brand new 3.06 GHz iMac. Installed Snow Leopard, 10.6.1. In general I don't experience any of the problems other people seem to have. But twice now my screen has turned blue while I am in the middle of something. All the open apps disappear and the Finder seems to relaunch. It only takes a few seconds. I don't have steps to reproduce it. Both times I had several apps open and had video/DVD running in the background.
Has anybody seen this?
I am a notorious file-saver which means I haven't lost much work through this but if it keeps happening I might have to go back to Leopard.
My Imac has been acting up. When I restart the mac it takes forever to start up. It goes to the blue and stays there for several minutes and then will finally boot up. I am running Leopard on an Intel 17 in imac.
View 5 Replies View Relatedgetting really annoyed here, installed snow leopard on 24" iMac 2.66 GHz Intel Core 2 Duo and all seems to go ok until it restarts
it just hangs on the blue screen for hours and hours, even a power off/on results in the same problem
i can boot into safe mode no probs, but always end up on hanging blue screen when i reboot (safe mode ok)
deleted all login items etc, but still no go
not running any haxies either
I installed snow leopard on my iMac. Everything seemed to go ok. It took about 45 minutes to install and it restarted but now it sits on a blue screen. What gives?
View 3 Replies View RelatedI upgraded from Leopard to Snow Leopard and I wanted to restore my computer so I found directions that said I should put the snow leopard disk back in the computer and restart it. Well, I did that and now all I have is a blue screen. What do I do!?!? I've tried manually turning it on/off and it will turn off, but still goes back to blue screen with nothing on it.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6)
My iMac has a blue screen and will not do anything at all!
Info:
iMac, Mac OS X (10.6.1)
