I have a new IMac and I installed vista via bootcamp, when I start up vista I am getting a blue error screen that flashes so fast i cant even ready it... then the computer shuts down. When I restart it again it goes to the page that gives me the choice to safe start or start normal. Sometimes it will let me go to windows and work fine but there have been times when it just does that over and over again. Does anyone know what this is caused from? I guess I'll have to reformat or something. If I continue to use my computer this way will it wreck something?
I keep getting the following error 3 quarters of the way:
STOP: C000021A "Fatal system error. The windows subsystem process terminated un expectedly w/ a status of OX C000005. System shut down. It's a blue screen with white letter.
I'm using Office XP Service Pack 2 with imac OSX Install DVD version 10.6.3.
The steps I'm taking are:
Log onto my mac and use pre installed bootcamp to partition the drive. I'm using 32GB of space. Then I use my xp Prof w/ service pack 2 cd to install xp. At this time everything is working fine except for the missing drives. Then I put the bootcamp cd that came with my imac into the iMac and run bootcamp. It looks like everything is working perfectly. The imac is finding wireless internet and all the drives look like they are working fine until out of no where a blue screen pops up and states what I wrote below. There is nothing else on the screen. I'm using a 27 inch imac that i bought about 5 weeks ago new.
So, I was on windows, using bootcamp, and I was creating partitions on a pen drive with it, and then it asks me that it needs to restart to apply changes.
But then, while restarting, a blue screen occurred (**** windows).... And I forced the shutdown pressing the power key.
Then, I simply turned the MacBook on, trying to boot on my snow leopard and I got a flashing folder with a question mark on it. Now I can't access any partitions on it, if I press option key on startup I get a blank window!
I tried to reset PRAM, repair the MacOs partition using the snow leopard DVD (it shows up fine, along with windows partition and EFI partition), and I still don't get my startup disk showing up...
Info: MacBook Pro, Mac OS X (10.6.8), Snow Leopard with windows7 bootcamp
Won't boot up past this screen, this is the first time this has happened. I am fairly certain it is related to an attempt to install SP3 (I had removed it in favor if SP2 to hopefully fix some wireless issues). I noticed when I shut it down last time that it was installing updates, which most certainly included SP3, and then I left the computer. Maybe the install failed? If so, how can I fix this? Any way around other than reverting to a backup? (I think the clone I have of it has SP3 on it)
I'm running Tiger on a 2.5ghz MacBook Pro (purchased april '08) and everything works perfectly and the screen colors/ brightness is perfect. In Windows XP however (running via Boot Camp), the screen has an annoying bluish tint that I can not get rid of. It is especially visible in lighter colors that should be gray or off-white. In the NVIDIA GeForce 8600M GT graphics card control panel there is no obvious way to fix this problem. And it is not a gamma or brightness problem- because even after adjusting those, the bluish tint remains. Perhaps this is caused by a lack of a control in XP and/or the graphics card for the moniter's color temperature on the LED back-lit screen? When running XP through VMware fusion however the screen colors are dead-on.
I have googled a lot about this, and found some fixes for the blue tint in Windows, but not in games. I know, you need to import OSX color profile etc, but even though I did this, the blue tint comes back as soon as I start a game. I saw people asking the same after they found the fix, but nobody replied. I found like 3 threads on google where nobody could answer how to get rid of that.
Problem Description: When installing bootcamp, the screen isn't configured and makes everything look washed out and blue-ish. After fixing that by importing the color profile from OSX, it comes back when starting games. For example, Team Fortress 2 has nothing of its colorful graphics, its grey and undersaturated with a blue tint. Call of Duty 4s desert levels are practically unplayable against other people because you can't distinguish people from rocks, concrete walls, sand or metal, because everything looks grey, cold, dull and blue.
How can I get the profile to stay selected or whatever is causing this? The normal desktop looks fine with the color profile, but as soon as you start games it seems to get reset to the blue hell. I am using a 15 inch Macbook Pro from 2010 with the i7 option, and all latest OSX updates, although I doubt that matters. (Also Windows 7 Ultimate 64 bit with latest updates).
The System Mac OS X 10.7.3 has no missing icon in the main system preferences -> Apearance "Blue" Screenshot 1, 23.05.12 AFTER UPDATE: The System Mac OS X 10.7.4 has a missing icon in the main system preferences -> Apearance "Blue" Screenshot 2, 23.05.12 What about you?
Well I finally got the drivers off of the MBA install DVD (URL). Just dumped them on to a USB stick. I installed XP Pro again using bootcamp assistant without a hitch. Rebooted into XP, put the USB stick in and ran the setup.exe off of it. XP blue screened when installing Broadcam drivers it appears.
OS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
A question about windows 7 and a Mac pro 3.1 edition 2008. I have installed windows 7 and all is fine and dandy everything works, except in the bottom right hand corner there the error flag showing on the tool bar.
This is the error.
Apple Memory Controller GPE event is not compatible with windows 7.
After windows is installed a Blue screen appears with cursor on screen but it freezes completely.I can fix this by restarting my mac , then once windows restarts i insert the Mac OS disc , select the disc within my computer but the following message appears "Package requires new version of installer"
my parents iMac 20" Core Duo is having issues. After bootcamp restarts the system I get an error on start up, a folder with a question mark shows up aswell as that prohibition logo How can I install Windows 7 on that machine?
I Have my 15" macbook pro 2,4 Ghz 2G in RAM, with Snow Leopard, bootcamp and vista running for some time (about a year or so) and every thing has been going ok. Last night I made a clean windows 7 installation. All went good, installation, let windows 7 make his updates, I put Snow Leopard disk to make macbook pro drivers updates and I installed all the program I need including Norton 2010 Antivirus.
All went smooth and easy untill I activated Windows 7 with Daz Windows Loader 1.6.9. After a few seconds It said : Everything Ok, Windows is now activated and your machine will reboot now. After that, it gets out of the desktop to the closing window and suddenly I get the blue death screen. I have to manually press de power button to shut down my macbook pro.
I reboot again and after getting the safe mode screen stuff i just keep with Start Windows normally. It starts well again, but now each time I want to reboot or shut down my MBP I get again and again the blue death screen. And I�m sure i will get it while working soon.Is it probably because I did all kind of updates before running the Daz Loader (including programs and antivirus software)??
I have iMac 27 and screen problem on start up i have blue vertical lines, when it start i have a lot of blue dots and nothing else. when I connect outside monitor its showing the same.
Just installed lion and still the same problem when it starts blue dots, when startup in safe mode loads of blue lines and dots on the screen.
I am having trouble loading window XP pro OEM sp2 using Bootcamp on my macbook OSX 10.5.8 It gets through copying all the files and reboots successfully through to the install window and the setup program for windows (where it displays various marketing info and has dot buttons down the left hand side). It says it will take 39 mins to setup but the counter never changes and I have left it up to an hour and nothing happens although once I did get a disk error message (something about cleaning the CD - can't remember exactly). I am doing full installs and have tried FAT and NTFS. At first I thought it was because it was an OEM but it is a Microsoft OEM and other people online seem to have no problems and do not seem to get as far in the install if it is that. Is this a dud CD or version of windows or am I just doing something wrong?
I have started a bootcamp installation on new (updated) mbp. During the install, windows-installation makes a critical error and says that the installation cannot continue.
I managed to eject the disk by holding down the mouse button, but my problem is that the mbp starts up in the corrupted windows installation and stops again. I'm in an endless rutine where I cannot boot in Leopard again.
I'v tried to give it the Leopard installation disk but it's beeing ejected. How do I get pass bootcamp and into OS X again.
I'm trying to bootcamp Vista onto my mac so that I can play Diablo 2 since it won't run on my macbook white (2.4GHz). Anyway, I have a legit CD for Vista that I used to install it however when I was selecting the partition to use I got the message that "Windows cannot be installed on this partition as it is not NTFS" or something in that general wording. So, is there any way to create a bootcamp partition as NTFS or is it possible to run Vista on a non NTFS partition.
I first installed Windows XP when I got my early 2008 Mac Pro. Boot Camp was probably beta back then, but I cant say my experience has changed much through Vista 32 bit or now Windows 7 64 bit. The way to dual boot, holding ALt during boot, has worked 1/10 times. Literally. The boot symbols are usually delayed, so I know when I choose the win partition, it gives me the "No bootable device" error. Two times have I had heavy OS X crashes after these boot-up "games". This last time I had to completely reinstall OS X (or upgrade to SL). How could this be, im not even booting into OS X when I am trying to boot into win.
I even have a separate hard drive for my Win partition. Not to mention the stream of driver issues you encounter when you finally manage to get inside Windows. I actually had my apple wireless and mouse working in Windows 7, but then I installed Boot Camp drivers of the DVD, and now theyre dead. I know. Its Windows, why would I miss it? Gaming or apps, regardless. Apple shouldnt include a program that functions so poorly, if they insist on higher standards elsewhere. It only reflects badly upon them. I consider myself a decent level mac user, venturing into command line troubleshooting if needed. But BootCamp remains a mystery to me.
I have tried to install windows on my mac and bootcamp says files can't be moved, I haven't got a problem with reinstalling my mac provided someone can tell me if it's possible using a backup from time machine and the process needed please. I've no idea whether it will work and I want to be 99.99999% sure before I do anything as I have important work on my mac which I can't afford to loose.
I have a Macbook (from 2007) running Tiger OS X 10.4.11. I am trying to install BootCamp onto the computer, but Tiger did not come with Boot Camp installed. Because of this I had to download Boot Camp 1.3 Beta. This is old, and has expired, but I changed the system date to be 2006 and this has made it work. When I am partitioning the disk, this message comes up: Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again. I have already Backed Up and the computer is already formatted as Mac OS Extended (Journaled), but this message still comes up. Disk Utility has Greyed out the Erase section for Macintosh HD so I cant re-format it.
I have recently downloaded a copy of Windows 7 on my macbook pro in attempt to bootcamp it so i can play more games. everything went well until it booted to windows installation. from there i clicked start installation and it gave me two choices either to Update it or Customise it. I first chose Update but it didnt work. I then tried customise, and found out that my partition wasnt in NTSC(or whatever) format. So i stop my attempt to install it and tried to go back to mac. I could not go back to mac. i dont know how. I'm stuck there with the installation disc in the drive. I cant go forward with the installation and i cant go back. I finally figured how to get the disc out, and i thought that if i install the Mac OS X again it would fix things so i insert a Leopard installation disc. I was Completly wrong, and now i am stuck at a black screen telling me to insert an installation disc with the Leopard disc in side. I cant do anything now . I need help please, any valid solution will be appriciated. THanks in advance
When partitioning so that I can install XP, bootcamp claims that specific files cannot be moved, making it so that I am unable to install XP. It then orders me to ~gasp~ back my files, and reinstall OSX. Anyone else have this error message? I wanted a 14GB partition, and that would leave about 16 additional gigs free on the OSX partition
To make a long story short, I cannot get past the stage in the Boot Camp install process where you make a partition on the hard drive for Windows. I get this error message: The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again. I do not have a removable hard drive to back up my data on. I've got two flash drives that I put my most important documents on but that's it. I can use my IPod Nano to store my ITunes library until this gets figured out.
The only data I would really lose would be my firefox information, though I did get the book mark history, my video game saved data (4 games), and programs like Word 04, Flip4Mac, and other miscellaneous gadgets. I have already shelled out $80 for the Leopard upgrade and $120 for XP. I have no other need for a removable hard drive and as such I will not buy one. I just got off the phone with Apple Tech Support, one hour of it, and after trying repairing disk permissions and other Disk Utility functions we got nowhere. I tried booting from the Leopard disk and doing the same Disk utility repair/repair permissions to no avail.
Varying the size of the partition had no effect. I tried wiping the free space on my hard drive via Disk Utilities and that did nothing. I have plenty of room on my hard drive, it's 120GB and I have a shade over 60GB remaining. The information on "Mac HD" is as follows: Mount Point :/Capacity :111.5 GB (119,690,149,888 Bytes) Format :Mac OS Extended (Journaled)Available :62.4 GB (67,002,867,712 Bytes) Owners Enabled :YesUsed :49.1 GB (52,687,282,176 Bytes) Number of Folders :135,138Number of Files :623,284
During the rebook with the Leopard CD, there were apparently some disk permission errors. During the repair permissions process it appeared they could not be repaired but were modified or something to that effect. I just ran another -verify disk-verify disk permissions-repair disk permissions and these errors did not show up. A subsequent attempt at partitioning failed. I was directed to call tech support tomorrow AM and am supposed to ask for someone in 'Tier 2', but I'm hoping someone has some ideas that do not including wiping my entire hard drive and starting from scratch. Particularly since I don't know if that will actually work
I have the Windows XP SP1 disk that came with my old computer. I know that OEM disks don't work, but i successfully install Windows onto bootcamp every time i try, and it works perfectly. The only thing is, I can't install the bootcamp drivers which let me access wifi because i don't have sp2. I can't slipstream, because the disk has updates integrated inside of it, and whenever I try to install SP2 from the sp2 install file i dl'd from the microsoft site, it always gives me a "4 additional megabytes required" error. I added 5 gigabytes. and it still has this error.
I bought this mac last year and decided to put a windows partition on it. I decided the partition was way too small so I erased it and made a new one. This time when I went to make a partition on my hard drive it said the beta had expired. I looked deeper into this message and some sites said to put your clock was to before September of 2007. Doing so I now get this message. Bootcamp assistant cannot open. This version of Boot Camp Assistant is not supported in Mac OS X v10.5. Use Boot Camp Assistant 2.0, located in /Applications/Utilities/. Well first I don't have a boot camp 2.0. So I downloaded the combo pack to make sure my firmware and such was up to date which it was. I still get this error message.
Just did a fresh install of Windows 7 RC onto my Boot Camp partition. Using VMWare's Fusion (v2.0.4) to load Windows 7 up on my Mac. However, it blue screens as soon as the Windows 7 logo appears during boot.
I have it set up to emulate "Windows 2008 Server x64" as detailed in VMWare's post to get Windows 7 working.
What's going on..? Any ideas how I can sort this out?
I just picked up a Mini display port to DVI adapter for my Macbook Pro so that I could hook it up to my 32 inch 1080p tv that I use as my main desktop monitor. It works just great in OSX (though for some odd reason I have to put the laptop to sleep then plug it in for it to work correctly. Can't be on or off otherwise I don't get the full picture not sure why) but in bootcamp it instantly causes a blue screen. If I plug it in then reboot to windows I get a blue screen even before its loaded windows all the way. I assume this is a driver issue but I'm using the latest boot camp drivers.
I seem to almost complete the upgrade and then it does the final reboot to comlete installation and then I get the blue screen which appears due to a display device issue.. I have 1.1 MP with a 7300gt video card in it
