OS X V10.6 Snow Leopard :: Screen Goes Black Just As The Blue Background Appears?
Apr 26, 2012
I have an iMac 21inch, Late 2009. I found after it was runing really slow that my hard drive was failing. It told me there were SMART errors on the drive. The computer is out of warranty and I'm in the middle of no where so i have no Mac store to take it to. I bought a new drive, same model, and installed it into the computer. It turns on fine, but after the Apple logo and spinning coge wheel the screen flashes, shows the blue back ground like its going to load the desktop and then goes black.
I've tried connecting an external monitor to it and shows up like an extended display. I've tried connecting it to another Mac, a Mini, and the Mini can boot off the iMacs hard drive just fine. If it Target Disk mode the Mini and boot the iMac I get the same flash of blue desktop then it goes black.
This is where it gets weird though, I'm sure your thinking, ok the screen is going bad... BUT, I boot off an Ubuntu CD, or the AHT disk and it loads fine and has no turning black. Its only when booting into the Mac OS or the installation disk.
One last note is that when its at the black screen and I'm sure its loaded the desktop, if I hold the power button down for about 3-4 seconds, till I hear a click. I then press the button again right away and the screen flashes on showing me the desktop and everything, for about 2 seconds...
I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.
Info: MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.5.1)
Had to force quit a number of applications to shut down computer, restarted it but froze on opening. Shut down with the power button and now it won't get past Gray screen with rotating dial (thingy)...tried the safe boot option but this seemed to get stuck after identifying some issues.
I click on the hd hard drive and change the settings to no one can read or write now I had problem to open the computer as soon I start it became gray screen so I re-stall the software and as soon I back up the computer is asking me the password I type it and can't enter after keep asking me the password is wrong
i changed the name of the hard-drive for other reasons, and i guess i must have somehow erased the two which show up in the login box. And, i cannot locate the disks.
Info: MacBook Pro, Other OS, no start up disk to be found
After windows is installed a Blue screen appears with cursor on screen but it freezes completely.I can fix this by restarting my mac , then once windows restarts i insert the Mac OS disc , select the disc within my computer but the following message appears "Package requires new version of installer"
I have a problem with my MacBook screen. Everytime I try to turn on the MacBook, the blue screen appears for a second and then everything gets dark (but I can see that the computer turned on normally, it's just the screen that gets almost black, without light). Sometimes only the right side of the screen is blue and then gets dark just like the left one. I was looking for the problem and I perceived that the left side seems to be loose and I can't fix it. What should I do?
since installing sl, my imac itself works fine however i am stuck with a solid blue wallpaper. everytime i try and change it, it goes back to blue screen within 30 seconds or so. not a crashing problem like others have faced, but annoying nonetheless. got to second level of apple support and still could not figure it out. anyone have any ideas?
I seem to almost complete the upgrade and then it does the final reboot to comlete installation and then I get the blue screen which appears due to a display device issue.. I have 1.1 MP with a 7300gt video card in it
I have a 2006 Mac Mini using Snow leopard OS X 10.6.8.It will start up to show the 2 User accounts that are set up however when one of the accounts is selected all that appears is a totally blue screen with only my mouse curser working on it. Is there a fix for this?
After upgrading from Leapard to Snow Leapard a few weeks ago on my macbook there has been a blue screen flashing before the login screen. Is this normal? Or am I being peranoid? could it be that i installed app cleaner? I unistalled app cleaner and it still did the same.
Display flatters for up to one second while doing the regular boot.Means it gets blue with Apple logo bright - like a negative of original screen.Was not observed with Mavericks first releases .1, .2.iMac Late 2013, 27 inch, NVIDIA GeForce GT 755M 1024 MB.Again possibly a problem with SMC and it's reset as first solution candidate,or rather graphics?
A few months ago, I bought a macbook pro and it was doing fine. But recently, every time it starts, a blue screen appears for a split second then it goes to log- in. Then, every time I shutdown, it will also show up for a split second then shutdown. It doesn't affect the computer but I'm just wondering how to stop it.
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
I am on a brand new 3.06 GHz iMac. Installed Snow Leopard, 10.6.1. In general I don't experience any of the problems other people seem to have. But twice now my screen has turned blue while I am in the middle of something. All the open apps disappear and the Finder seems to relaunch. It only takes a few seconds. I don't have steps to reproduce it. Both times I had several apps open and had video/DVD running in the background.
Has anybody seen this?
I am a notorious file-saver which means I haven't lost much work through this but if it keeps happening I might have to go back to Leopard.
I installed snow leopard on my iMac. Everything seemed to go ok. It took about 45 minutes to install and it restarted but now it sits on a blue screen. What gives?
I upgraded from Leopard to Snow Leopard and I wanted to restore my computer so I found directions that said I should put the snow leopard disk back in the computer and restart it. Well, I did that and now all I have is a blue screen. What do I do!?!? I've tried manually turning it on/off and it will turn off, but still goes back to blue screen with nothing on it.
Info: MacBook Pro (13-inch Mid 2010), Mac OS X (10.6)
ok my macbook wont boot. i hit the power button, i hear the cd drive move, grey screen comes up with the apply logo and the little progress loading spinner thing, boot sound rings, then it goes to a dark blue screen for a second then it turns a lighter blue and the cursor is there and i can move it around, and then nothing happens it just sits there
i tried holding command/option/p/r till i heard the boot noise twice then let go and it stopped at the blue screen again. i didnt download anything new or change any permissions or system settings, just powered off last night and went to turn it on this morning and this happened
Over the past month I have encountered a number of bugs with Snow Leopard on my MacBook Pro (mid 2006). Ever once in a while, usually during high performance task (like watching flash or encoding with handbrake) the temperature of my cpu will spike to 85-90 degrees celsius and then the system freezes.
During this freeze, I can still move my mouse, but I am unable to click on anything on the dock or any program. Moving the mouse over the dock does not invoke the magnification either. I have to do a hard reset to fix the problem.
Also every once in a while, a long blue horizontal line will appear in on the screen. (sometimes their in iChat windows, sometimes safari, and sometimes the desktop as shown in the photo).
OS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
I had permission problems (locked time machine drive) so I did a full time machine restore.
Did the restart after the restore. Machine won't reboot. I get 'bong', apple logo on grey screen as per normal.
Then blue screen and spinning wheel for approx 7 seconds Then blue screen and black pointer for approx 2 seconds The blue screen spinning wheel / black pointer repeats. Also can't start up from Snow Leopard DVD.
I get exactly the same scenario. I have held down the power key at got the tone. Still won't start. It's an Imac (white one) 1.8Gig Dual with 1.5 gig of ram.
Running Snow leopard. I can see my disc over the ethernet; it is still there as it was sharing with my other machine.
G5 Power Mac, 4 gb RAM, OS 10.6. Machine freezes up if: I run a video (1st, 2nd one), use Safari for a few minutes, use Firefox for 1/2 hour, longer if I only have 1 tab open at a time. Occasionally, I get the black screen of death instead, with the #s running about the screen (white font), out of The Matrix. I've run Disk Utilities - RAM checks out okay, cleared out cache, switched to a new HD (old one had been there since I got the Mac, several years ago), these have alleviated but not eliminated the problem. A tech friend suggested thermal grease on the CPU, or replacing the CPU, but don't know if the latter's possible. Oh, and some part is missing that results in the fan running all of the time, like being on a runway.
There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?
I upgraded to Snow Leopard and a few days later when i went to shutdown my mac pro after i woke it up, i got the blue screen and progress wheel just spinning. After calls with Apple, running both long and short hardware tests, 3 snow leopard discs, a clean install, 2 upgrades, the tech gave up. The clean install was a bare bones install with no applications installed. I would now have to take it into a repair shop and pay for software tests. This is a one year old mac pro with apple care. I used Time Machine to restore to leopard, and all is ok. Has anyone heard of this problem? I'm quit happy to stick with Leopard, but am upset that an apple software problem has to be fixed and paid for by me. I assume if it was a hardware problem it would show up in Leopard.
1. When closing the lid or pressing the power button the computer freezes, the fans start spinning fast it stays like that until it drains the battery. This happens every time.
2. Start-up times are very long, like 3 or 4 minutes. This also happens every time.
3. Now after a fresh snow leopard install it doesn't even start up completely, as it stays showing a light blue background and I can hear the music of the introductory animation.
4. Also, the keyboard is unresponsive at the login screen, but the mouse cursor moves and the display goes to sleep normally. Clicking anywhere with the mouse also produces no effect.
5. It seems to work OK in safe mode.
The macbook worked ok with the factory installed Tiger. The SL DVD is OK, as its installation has been tested on another Mac. The machine's advanced hardware test passed successfully. Resetting Pram and SMC did not solve the problem.
