I just installed MAC OS LION after snow leopard and now I can't get the iMAC to communicate with my canon printer. I installed the canon drivers again but still no go.
View 2 Replies
I am unable to print from my macbook using wireless connection to my home wifi. I am using OSX 10.7.4.
I have a failure to communicate to printer message and a On Hold message (authentication required)
Info:
MacBook, Mac OS X (10.7.3), Attempting to connect to HP Printer
I just purchased a Canon MG5220. I have installed all of the updated drivers for 10.7.3. The scanner is working wirelessly, but I can't add my printer.
Info:
Mac OS X (10.7.3)
I would like to use a perfectly good Canon Pixma ip4200 printer with OSX Mountain Lion 10.8.5 and  Yosemite 10.10.1 on my 2013 model iMac but Canon say they do not do a driver for these more recent versions of OSX later than 10.7. Is there any way to get this to work?
View 1 Replies View RelatedI was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I have installed canon image browser which causes my system to crash.
Info:
iMac, Mac OS X (10.7.3), processor 3.4GHz intel core i7
Printer software for canon MP830 is unavailable from Apple. I downloaded the driver from canon and installed it. It shows on the desktop, but I cannot add the printer. It keeps wanting to find the software at apple. How do I configure this to work?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3), Canon MP830 printer
imac 27 will not go beyond grey screen, since re-installing Canon printer software. Printer was working ok before.
View 1 Replies View RelatedShared canon usb printer on Mac sends a linefeed but no data. I'm using Bonjour on the PC(Windows 7) and the printer shows up in the list. I can use the printer setup window on the PC which shows if the ink is low etc. When I print I hear the Mac's hard drive operate but it just sends a sheet of paper through without any printing on it.
Info:
iMac, Mac OS X (10.5.1), Wireless k'brd and mouse
I have a Canon MP 640 Wireless printer, and have not been able to establish a wireless connection.
Info:
iMac, Mac OS X (10.7.3)
I have just connected my Canon Pixma MG5270 to my iMac running OSX 10.7.3 via WiFi. Printing works great, and scanning from the desktop "Canon MP Navigator EX - MG 5200 series" V 4.0.3 application works like a dream. When I try to scan via the operations panel on the printer/scanner the following comes up - Set the PC to start scanning". This worked fine when connected directly via USB cable. I have searched the web and believe I have the correct settings, particuliarly in MP Navigator:Â
1. Main Menu -> One-click -> Start scanning by clicking the button (checked)
2. Main Menu -> One-click -> Preferences -> General -> Compress scanned images when transferring (checked) -> Change -> Network Device List (selected Canon MG 5200 series_xxxxxxxxx) -> Scan-from-Operation-Panel Settings -> Network Device List (selected Canon MG5200 series_xxxxxxx)Â I have restarted the iMac and printer and always with the same result.Â
Info:
iMac (21.5-inch Mid 2011)
I replaced my hard drive and cant get my canon mp490 printer to work. My timeline backup had old printer drivers but cant seem to find new printer.
Info:
iMac, Mac OS X (10.7.4)
My MacBook Pro late 2011 will not communicate with my HP6500 Officejet all-in-one. I have tried everything imaginable to fix the problem. My iPad mini works wonderfully with the same printer.
Info:
MacBook Pro (15-inch Late 2011), OS X Mavericks (10.9.4)
I have a iphone with updated software. I want to print using my Wi-Fi canon pixmas mp640 but it tells me it cannot locate the printer
Info:
iPhone 4, updated operating system
I am unable to set up our office Canon image Runner 3225 (iR3225) network printer up. I have followed the steps on both the canon, and apple site. I have also tried driver UFR II (2.24), and other drivers as well. I can look at the printer online but it will not locate it in setup no matter what I do.
I am running OS X Lion 10.7.3
I have 2 new I-Mac computers set up on a home network. I have my new Canon D480 Multifunction printer connected to one of the Macs ("Mac #1) by USB and it prints perfectly with the driver recommended in the printer manual downloaded from the Canon site. I have Printer sharing turned on. The printer's name on Mac #1 is Canon D460-490 (UFRII LT) which is the name that was automatically given to the printer when I downloaded the drivers and installed them.
However I am unable to print to the printer from the second new Mac ("Mac #2") although I have downloaded the same printer driver and have added the printer on Mac #2. The printer's name on Mac #2 is Canon D460-490 (UFRII LT) @ Mac #1.I go through the motions of File, Print, but nothing happens.
I have installed a new printer through on my imac (10.6) and it does not work. how can I delete this installed printer driver (without affecting anything else)?
Info:
iMac, Mac OS X (10.6.8)
I have just installed OS X 10.6.8 Now my printer (HP psc 2410 Photosmart won't work. I went to HP site to get a new driver, but they have none for this OS. Now what do I do?
Info:
iMac (20-inch Early 2008), Mac OS X (10.6.8)
I have moved an Early 2008 iMac with an Intel Core2 Duo 2.4 GHz processor and OS X version 10.9.3 to a summer home where I have an HP psc 2410 photosmart all-in-one Printer. I have attempted to load the driver for this printer using System Preferences/ Printers and faxes. When I select the + I find my psc 2400 printer listed when I select add I get the message: Some of the software for the printer is missing. You may have to reinstall the software to be able to successfully print. There is the option to continue. Selecting this button I get the message: The software for the printer was installed incorrectly. Please reinstall the software from the manufacturer. This printer was purchased when I had a Mac with a power PC chip and OS X version 10.4.1 which can not be loaded into the current computer. Is there a way to load the driver software that seems to be missing?
View 11 Replies View Relatedhow to get the scanner on a Canon MP800 scanner/printer to scan with Lion software. I've installed the Canon Version 3.0.4 driver but it still doesn't work.
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
I would like to exchange files with my Nokia N8 but my Mac does not want to see the phone's memory.
Info:
iMac, Mac OS X (10.7.3)
I just downloaded and installed the new Canon drivers from their website that are supposed to support Scanner/Printer functions for my MX870 with Yosemite, but when I go to Settings for Printer/Scanner and try to add the printer from the wireless network, the computer does not detect it.
Info:
iMac (21.5-inch, Late 2013), OS X Yosemite (10.10.1)
I am using a Canon MP620 all in one with my MacPowerbook running Leopard 10.5.8. My Canon software is MP Navigator 1.05. The printer is agonizely slow. Sometimes after I press the print button it can take over a minute to even start. This not only occurs when I first start up but after the printer has been in use. This occurs when printing black and white text or pictures. I have been going through a hub and have not yet tried a direct connect which I will shortly. Anyone got any ideas or is this just a slow printer?
View 2 Replies View RelatedProblem: Canon MP560 printer won't print from 2008 Macbook Pro 10.6.5. It is recognized, I can print a sample page from the printer utility, but InDesign CS5, Acrobat Pro, Word 2011, text edit, Firefox, etc won't print to it. I'm not sure what caused this to start happening, as I've had this printer for almost a year. It is recognized on both USB and WIFI, yet neither connection works.
View 1 Replies View RelatedHas anyone got a work around for the Canon IPF500 printer.
I need to get this working, but waiting for new driver to be released from Canon.
Anyone know any temporary fixes?
After hours on the phone with Canon support, they told me it was a MAC problem. I have a new Canon Pixma MX860 printer..
First , Downloaded drivers from the Canon website with their support phone person helping set it up. Printer worked wirelessly with the MAC for 2 days. Then gone. Printer no longer on printer list and won't print either by USB or wirelessly. Called Canon support.
He guided me thru reinstalling in different ways, repaired permissions, set up additional acct name, but still the printer in not listed on Printer Browser screen when wireless used (it is listed when USB connected, but cannot print)and not listed at all on Print & Fax screen. My MAC doesn't recognize the printer now. What happened?
Here today , gone tomorrow. And nothing was downloaded , updated, or anything added or done to the computer from one day to the next. It is a huge mystery.
Did a disk utility 1st aid days before...nothing needed repair...Did the 1st aid, due to slowness starting, downloading from cameras very slow, and message "start up disk is almost full", which it is NOT ...46GB available.
I can print wireless but I can not scan wireless. Why? I am connected by wire from the canon 490 direct to my airport so why is it the scanner will not work? Can anyone explain ?
View 4 Replies View RelatedI've downloaded the Canon drivers to my MacBook. Now what? How do I actually install the particular printer so that it shows up on a print menu?
View 5 Replies View RelatedMy MacBook, 5,1; OS 10.6.8 can't seem to print directly using my Canon Pixma MP 640htheÂ
It can find the printer as an IJ device via LAN, and it will tell me that the print job is being sent and that it has printed but nothing comes out. Same result when i connected it via USB cable. Have tried installing/reinstalling drivers from Canon and even once got it to print a test page. Â
Info:
MacBook, Mac OS X (10.6.8)
I have my Canon iP4200 printer hooked up to my iMac and have been using it for years with out any problems until today. When i try to print something nothing happens. In the Printer queue application thing in the dock, it shows the document in queue and its status is "printing". On top of the window it shows this message: 'GenericClass: waiting for device' whatever that means i assume thats the issue but have no clue what it means. I have so many things to print for uni and need to get this working again, how do i get it back to working order again??
View 5 Replies View Related
