Intel Mac :: Can't Scan From Printer Control Panel On Canon Pixma MG5270
May 3, 2012
I have just connected my Canon Pixma MG5270 to my iMac running OSX 10.7.3 via WiFi. Printing works great, and scanning from the desktop "Canon MP Navigator EX - MG 5200 series" V 4.0.3 application works like a dream. When I try to scan via the operations panel on the printer/scanner the following comes up - Set the PC to start scanning". This worked fine when connected directly via USB cable. I have searched the web and believe I have the correct settings, particuliarly in MP Navigator:Â
1. Main Menu -> One-click -> Start scanning by clicking the button (checked)
2. Main Menu -> One-click -> Preferences -> General -> Compress scanned images when transferring (checked) -> Change -> Network Device List (selected Canon MG 5200 series_xxxxxxxxx) -> Scan-from-Operation-Panel Settings -> Network Device List (selected Canon MG5200 series_xxxxxxx)Â I have restarted the iMac and printer and always with the same result.Â
Info:
iMac (21.5-inch Mid 2011)
View 6 Replies
ADVERTISEMENT
May 16, 2012
Trying to scan a sheet to my MacBook Air running Lion, but whenever I open the scanner from the System Preferences, it just stays like this and nothing happens. Reading around, it appears that you can't use the MX350 scanner over WiFi using Lion. It works perfectly on my iMac running Snow Leopard 10.6.8 but unfortunately I can't use that right now.
I've tried inserting a USB stick formatted with Mac OS (Journaled) and it doesn't want to do anything, I've tried installing multiple scanner drivers from the Canon website, I've also tried to do a software update. I'm running Mac OSX Lion 10.7.4 and have a Netgear router supplied by Virgin Media. It prints perfectly fine from the MacBook Air.
Info:
MacBook Air, Mac OS X (10.7.2), 2011, 11", 1.6GHz, 4GB RAM, 128GB
View 7 Replies
View Related
Dec 10, 2014
I would like to use a perfectly good Canon Pixma ip4200 printer with OSX Mountain Lion 10.8.5 and  Yosemite 10.10.1 on my 2013 model iMac but Canon say they do not do a driver for these more recent versions of OSX later than 10.7. Is there any way to get this to work?
View 1 Replies
View Related
Jan 9, 2009
I was looking to buy a printer. I already have a Epson Perfection Scanner ( its not the best but does the job)
Canon Pixma MX850 Office All-In-One Printer (2436B002) apparently is listed in Mac World as one of the top products in their most recent issue. I was hoping some real world people may advise me on whether its a good purchase. If you have one or know someone who does or know of a better printer post a reply.
I'm not looking to spend more than $200 on a printer. I'm also a designer so I'm looking for one that prints graphic design work decently. I have an old G5 tower and my new 13" white mackbook that I want it to work with too.
View 2 Replies
View Related
May 7, 2009
I'n not sure anyone uses either printer on this forum, but I figured I ask anyways.
I'm in need a of a new printer, I have the discontinued kodak 1400 dye-sub printer which I'm looking to replace. Long story short, I'm down to two printers:The HP 8850 and the Canon pro9000 (the older model or the MKII)I've heard complaints of HP's drivers/quality/tech support lately but in the past I've been a satisfied customer. I never owned/used a canon so I have nothing to judge them on.So, I'm fishing for advice, in general on HP vs. Canon (especially for the mac related drivers/support) and specifically if anyone has any advice or insight on either of these two printers.
View 2 Replies
View Related
Dec 3, 2014
Upgrade to Yosemite 10.10.1 caused my Canon Pixma ip8500 printer to stop working. Canon no longer supporting this printer.
Info:
iMac with Retina 5K display, OS X Yosemite (10.10.1)
View 3 Replies
View Related
Apr 6, 2012
I can't scan with my wireless canon 5300 mg printer and there is no scan option in my printer window.
Info:
iPad, iOS 4.3.1
View 4 Replies
View Related
Jun 20, 2012
how to get the scanner on a Canon MP800 scanner/printer to scan with Lion software. I've installed the Canon Version 3.0.4 driver but it still doesn't work.
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
View 2 Replies
View Related
Jun 21, 2012
How do I scan pictures to my Mac using a Cannon Pixma MP500?
View 1 Replies
View Related
Mar 5, 2012
My customer lost his "control panel" and now can't change is desktop background.
Info:
iMac, Mac OS X (10.5.8)
View 1 Replies
View Related
Jan 17, 2009
I recently purchased a brand new iP4500 and afer installing the latest drivers and setting up everything I cannot print..
The test prints come out OK (thus, the printer connection is good and working). Tried evrything, even tried printing from the root user. I spent 45 minutes with Canon Tech Support and they basically said "There's a problem with your system not spooling properly, and there's nothing else we can do from here, go to Apple"
Now here's the deal, I have two iMacs (one g5, one Intel, both with 10.5.6 but otherwise differently configurated) And I get the same error in BOTH.
Is there anything I could be doing wrong?
Can I have any suggestions to get this going?
View 2 Replies
View Related
Jul 9, 2009
I got a this printer from the free printer with new mac special and bought a class 1 bluetooth dongle from ebay.I connected it to the printer and opened the bluetooth set-up assistant and it recognized it by its name and model number. I set it up and everything appeared to be working normally but when i try to print i get the 306 error. does anyone know what to do?
View 2 Replies
View Related
Feb 21, 2012
I have a Canon Pixma MP780 and want to know if I can set it up to print wirelessly from my Macbook Pro.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
Nov 13, 2007
Brand new iMac (my first one), sitting next to my Sony XP computer. I have a wireless network and have been able to share files between the two computers. I have all of my work information on my PC and am wanting to print to my new Canon Pixma printer which is connected to the MAC. I can "see" the printer when I go to printing preferences on my PC but when I hit print, I get an error message that says the printer if offline. I have all sharing enabled on both computers and when I go into the print queue, there is a document that is in there that it won't allow me to delete because it was "sent" by the owner "Valerie"....not sure if that is part of it or not. I guess my first question is, can I print over my wireless network through my MAC to the Canon and if I can, any idea what could be impeding me from printing?
View 3 Replies
View Related
Jun 3, 2008
so I bought a super awesome easy to use ink refill kit for my Canon Pixma MP150. The cartridge refilled fine, but the printer is being cranky and won't let me print because it still thinks the ink is low.
As some of you may know, most printers monitor your ink level, but they usually simply estimate the remaining ink based on how much ink the printer things it has used up in printing. It has no idea how much ink is actually left in the tank... and will still think it's low if you refill the cartridge.
My printer, however, doesn't let me print now that it thinks my refilled cartridge is low.
According to canon's website, i'm SUPPOSED to get an error message on my screen asking if I want to continue printing anyway... but I don't, and their support hasn't been very helpful.
I don't get ANY error message at all. The Printer Setup Utility simply stops all print jobs for that printer without any explanation. I've figured out through experience in the past that this is always solved by replacing a low ink cartridge. It's a pretty stupid system cause it doesn't even tell me that's why it won't print... but every time I try to resume the print jobs it immediately stops them again.
Do you guys have any tips on how I can turn off the ink level monitor on the printer, or on how I can force it to print anyway.
Do you guys think that maybe Gimp-Print drivers would let me bypass the ink monitoring? If I do that, then will gimp-print still give me full control over the printer (i.e. will I still be able to clean the nozzles and stuff using gimp-print drivers?)
View 11 Replies
View Related
Apr 19, 2009
OK so i currently bought a brand new 24" imac and am trying to print from my MP610.The printer is running off a wireless network and i have no trouble finding or connecting to it.I downloaded the most recent drivers from the canon website,( 6.9.3) and installed them. However the problem is i cant seem to find them anywhere in the computer. The driver does not show up in the selected driver list, and i can't see to find it manually either.
View 3 Replies
View Related
Jun 11, 2009
I have just set up a Canon Pixma MP620 to work wirelessly over wifi on my network. The printer works fine when it is right next to the router (a Netgear). However, when I move the printer to another room away from the router, the signal strength goes to nothing/unstable and I cannot print wirelessly. My MacBook retains full wifi signal strength in this same room so the router coverage would appear to be okay.
Is there anyone using this printer over wifi where the printer is in a different room to the access point/router? Is there something wrong with my printer?
View 2 Replies
View Related
Jul 4, 2012
My macbook pro is no longer recognizing the scanning function of my Canon pixma 860. It comes up as a printer, but not a scanner. I have the latest software updates installed?
View 1 Replies
View Related
Feb 28, 2012
I recently updated my operating system to Mac OS X snow leopard 10.6.8. And now my HP photosmart C5000 series printer will not scan. What can I do?
Info:
Mac OS X (10.6.8)
View 1 Replies
View Related
Feb 27, 2009
My current setup is an AirPort express with a PIXMA iP8500, if I grabbed a LaserJet 1020, could I plug a USB hub in the AirPort Express, and network them both at once?
View 1 Replies
View Related
May 14, 2012
I just installed MAC OS LION after snow leopard and now I can't get the iMAC to communicate with my canon printer. I installed the canon drivers again but still no go.
View 2 Replies
View Related
Jun 18, 2012
imac 27 will not go beyond grey screen, since re-installing Canon printer software. Printer was working ok before.
View 1 Replies
View Related
Jun 25, 2012
Shared canon usb printer on Mac sends a linefeed but no data. I'm using Bonjour on the PC(Windows 7) and the printer shows up in the list. I can use the printer setup window on the PC which shows if the ink is low etc. When I print I hear the Mac's hard drive operate but it just sends a sheet of paper through without any printing on it.
Info:
iMac, Mac OS X (10.5.1), Wireless k'brd and mouse
View 1 Replies
View Related
Oct 10, 2008
I invested in the Canon PIXMA MP610 to go with my new iMAC but can't get the printer properties feature to work. There is a multi-tab dialogue box in Windows with all sorts of useful features e.g. print quality, paper type & size, watermarks etc so I presume I should be getting something similar on my MAC? Have downloaded all latest drivers from Canon siteI'm new to MACs having only just moved away from Windows, so I may be doing something really stupid!
View 15 Replies
View Related
Jul 1, 2012
I replaced my hard drive and cant get my canon mp490 printer to work. My timeline backup had old printer drivers but cant seem to find new printer.
Info:
iMac, Mac OS X (10.7.4)
View 3 Replies
View Related
Jun 16, 2012
I have an iMac 27" (intel 3.4 GHz, Intel core i7, and 16 GB memroy) purchased a few months ago. It is running the latest version of Lion 10.7.4 I run this computer on our network along with a iMac 24" 3.5years old and a Macbook Pro 2.5year old.Â
This computer seems to have a beef with the Hewlett-Packard printer (HP colour laser jet CM1312nfi MFP) which I have had for about 3 years. I can not get the new computer to work with the printer properly. It allows printing but it pauses all the time when you resume the print it starts printing from the begining of the document againIt will pause any prints sent to it across the network after the first 1 or 2 pages are printedIt won't allow scanning at allWhen you launch the scanner it takes forever to connect (3 - 4 mins)If you try to scan using any of the scan options (if it loads the devise) it then states it can not connect to the device, or all the scan buttons apear but greyed out.This is odd as it will still allow printing??Â
Also, all the other PC's have the same version of Lion 10.7.4 and have the latest HP Driver installed (these were released on the 14 Dec 2011). Other useful infoThe scanner is hard wired to the 27" machineYou can only use the printer if one scanner is hard wired as it does not have wirless capacity.I have uninstalled and installed the software more times than i can count trying all different trouble shooting etcI can only conclued that there is somthing the 27" machine is doing to prevent the scnanner registering properlyNone of the other computers can use the scanner correctly either. As you can only scan a page at a time using the "Scan" button. If I wish to scan multiple pages on with either of the other computers I need to use the "scan to folder" button.Â
View 4 Replies
View Related
Jun 1, 2012
I am totally confused about my all-in-one. Before Lion I used it successfully for printing and scanning, both using USB and Ethernet connection. I can't recollect using it wirelessly. I'd like to use it wirelessly now, but I have problems. The printer works very unreliably, getting connection error from time to time, and the scanner does not work at all. When I open Canon IJ Network Scanner Selector, I see my scanner but I can't select it. The radio buttons are disabled and 'Do Not Use' is selected. I did completely reinstall the printer, removed all the drivers and Canon software, with no luck. All I need is for it to wirelessly print reliably and scan using Image Capture.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4)
View 3 Replies
View Related
Jun 20, 2012
I want to simply scan photos from the canon mp495 via usb to my mac running lion os 10.7.4
Info:
MacBook Pro, Mac OS X (10.7.4)
View 4 Replies
View Related
Jan 22, 2009
I have two computers (Mac and PC) connected to a cable modem via Belkin router. Both can connect to the Internet.
My Power Mac G5 2Ghz has two internal hard drives. My primary boot drive has Leopard 10.5.6 and the secondary has Tiger 10.4.11.
I had the built in Firewall set for "Allow only Essential Services" then I changed it back to "Allow all incoming connections" before I installed Netbarrier X5. My access to the internet and router/control panel was fine.
Then suddenly my G5 (Leopard) was no longer able to log into the router/control panel only the PC (Windows XP). Tried Safari and Firefox and both come back with the error message "Safari can't connect to server."
When I boot the G5 into "Safe Mode" it is the same thing, can connect to the internet but have no access to the router control panel. So it can't be Netbarrier.
But If I my G5 reboot with my second drive that has Tiger. My access to the router's control panel is restored.
View 1 Replies
View Related
Oct 29, 2009
I am new to Mac and need some help. I just installed norton antivirus for my mac and the software accidentally created duplicate icons in the top right control panel. I am wanting to delete one of these but haven't been successful. I already tried the command and drag off but they don't move, they are stuck there. Any remedies to this? How can I get them off the top right control panel?
View 3 Replies
View Related
