OS X V10.7 Lion :: Can't Print Wirelessly With Canon MP640 Printer
May 14, 2012I have a Canon MP 640 Wireless printer, and have not been able to establish a wireless connection.
Info:
iMac, Mac OS X (10.7.3)
I have a Canon MP 640 Wireless printer, and have not been able to establish a wireless connection.
Info:
iMac, Mac OS X (10.7.3)
I have a iphone with updated software. I want to print using my Wi-Fi canon pixmas mp640 but it tells me it cannot locate the printer
Info:
iPhone 4, updated operating system
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I have a Canon Pixma MP780 and want to know if I can set it up to print wirelessly from my Macbook Pro.
Info:
MacBook Pro, Mac OS X (10.6.8)
I just got the Epson workforce 615 and after hours of trying to connect this printer to my airport I give up....
Does anyone have step by step instructions on how to do this?It just does not want to connect to my airport network no matter what I do. I have downloaded all the drivers/software off the epson site to no avail.
My MacBook, 5,1; OS 10.6.8 can't seem to print directly using my Canon Pixma MP 640htheÂ
It can find the printer as an IJ device via LAN, and it will tell me that the print job is being sent and that it has printed but nothing comes out. Same result when i connected it via USB cable. Have tried installing/reinstalling drivers from Canon and even once got it to print a test page. Â
Info:
MacBook, Mac OS X (10.6.8)
I have a Canon Pixma MX700 connected to a PC and am able to print text/word files from my MAC to the printer via the router without any problems. However, whenever I try to print a document containing a table or a graphic, it doesn't print in the right place, and there is often a blue 'echo' of the table or image that also prints. I am currently using a gutenprint driver.
View 3 Replies View RelatedI have a Macbook air and my printer is a canon 6150.Â
When I go to print it doesn't always print out properly when I am using word and adobe pdf files. It seems to print ok when I open documents in preview.Â
I have been on the phone to canon and reinstalled the printer drivers and tested the printer by doing a colour copy and printing on my phone. Both of these work. As these work the cannon dude says its something to do with the setting in my computer rather than an issue with the printer.Â
How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.
View 3 Replies View RelatedI am totally confused about my all-in-one. Before Lion I used it successfully for printing and scanning, both using USB and Ethernet connection. I can't recollect using it wirelessly. I'd like to use it wirelessly now, but I have problems. The printer works very unreliably, getting connection error from time to time, and the scanner does not work at all. When I open Canon IJ Network Scanner Selector, I see my scanner but I can't select it. The radio buttons are disabled and 'Do Not Use' is selected. I did completely reinstall the printer, removed all the drivers and Canon software, with no luck. All I need is for it to wirelessly print reliably and scan using Image Capture.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4)
I am new to Mac. Recently I bought a Macbook Air with OS X v10.7. I have a ADSL router with the Canon printer with fixed IP 192.168.2.100. I have a wireless router connected to the ADSL router. This wirless rouer is in another subnet 192.168.3.0.My Windows 7 notebook I am able to print wirelessly to the Canon using a manual configuration (IP printing). As for the Mac, I have installed the latest Canon CUPS drivers and the Canon IJ Network Tool. I use the Canon IJ Network tool, I am not able to scan for the printer. I configure manually with the IP address such as IPP://192.168.2.100 but it still cannot print. The status of printer goes from idle to busy.
Info:
MacBook Air, Mac OS X (10.7.4)
I have a Macbook Pro, ipad 2 and apple tv as well as a Canon MP640 all connected through airport xtreme. All was working fine until I upgraded from Snow Leopard to OS X Lion. Now I can't print or scan to my Mac, either from the MacBook or from the printer/scanner.
Info:
MacBook Pro (17-inch Mid 2010), Mac OS X (10.7.3)
I recently upgraded to Lion and am now unable to print either through USB or wirelessly. I have an HP Officejet Pro 8500A Plus printer and have made sure to install all the new software since upgrading my OS. When I go to print my print queue shows the status as 'printing' but ultimately nothing prints.
Info:
MacBook Pro, Mac OS X (10.7.3), HP Officejet Pro 8500A Plus
I purchased an Epson Stylus NX530 printer with wireless capability. I have a MacBook Pro running OSX v10.7. My printer is installed and works as expected when connected via USB cord but printer shows up offline when USB is disconnected. I connected my printer to my wireless network through my router (entering name of connection and passcode) and enabled the sharing capabiliy in System Preferences. So my setup is that I connected my MacBook to my router and my printer to the router. Is there anything else I am missing? Would connecting both the computer and printer to the wireless router be all I shoud need to do to be able to print wirelessly? Is my wirelss router considered my "network?" If my printer has a wireless internet connection, should I be able to "view" it anywhere on my MacBook other than printer settings when it is not connected via USB (I had to initially connect my computer via USB to the printer during setup).Â
Info:
MacBook Pro, Mac OS X (10.6.8)
We have a Canon MF4380dn (similar to MF4370dn) and we cannot print to it from a MacBook Pro that is running Lion 10.7.3 We have tried connecting via USB and via network and have installed the latest UFR II 2.30 driver from Canon. We have completely removed the drivers and re-added them with no success. It can see the printer when it is connected either via USB or via network and it adds the software correctly. However, whenever we try to print a test page it seems to send it to the printer and then it immediately disappears and no page prints
View 4 Replies View RelatedI have an Intel iMac running OS 10.7.3 and I'm trying to print to a Canon IPF610 wide format printer. I keep getting a garodclfilter error : 3000. I can print to it from my old Mac G5 running 10.5.8 with no problems. I do have the latest driver installed from Canon's website and also tried reinstalling it several times without any luck.Â
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I just purchased a Time Capsule for my Mac, and now I am able to hook up a Canon laser printer directly to it. My Mac recognizes the printer connected to the Time Capsule, but keeps aksing me to "Choose a Driver or Printer Model" when I am setting it up. I have downloaded the Canon print driver from the Canon website and I can find the Canon folder on my hard drive. However, it seems that I can't fine the actual driver.
Info:
iMac, Mac OS X (10.7.3)
I have an Airport Extreme Base Station set up that is connected to my modem. I purchased a new Airport Express that I have used to extend my network. I plugged my Canon MF8050cn printer into the USB port of the airport express. I've added the printer successfully, but when I try printing to the Canon via wifi, I get this error: Â
"Canon CMFP Printer Driver; Printer is not responding.Check the printer power and connection, and then try sending printing job again." Printer power is on and connected correctly. As a side note, I am able to print to the printer successfully when I plug the printer into my macbook air directly via USB. So I have two printers added, "Canon - USB" and "Canon - Wifi". The latter is the one that gives me the error. I purchased the airport express so I could print wirelessly as I'm unable to move my printer closer to the Base Station.Â
Info:
AirPort Express 802.11n (1st Gen), Mac OS X (10.7.3)
I am trying to print from my iMac to a Canon SELPHY ES 1 using Gutenprint v5.2.3 driver and connected using a USB cable. The printer and Mac recognise each other but it doesn´t work.
Info:
iMac, Mac OS X (10.7.3)
I cannot install the Canon LBP 5000 laser color print on Mac OS LIOX.Â
Info:
iMac, Mac OS X (10.7.1)
I had to download software compatible with 10.7.4 in order to run a Canon iX6520 Printer, including Easy - PhotoPrint EX. It worked for a while, but now crashes every time I try to use it, just after clicking on "Print". How to correct this?
Info:
iMac, Mac OS X (10.7.4)
Printer software for canon MP830 is unavailable from Apple. I downloaded the driver from canon and installed it. It shows on the desktop, but I cannot add the printer. It keeps wanting to find the software at apple. How do I configure this to work?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3), Canon MP830 printer
Trying everything from installing ix4000's driver to CUPS driver and so on. The printer works fine when connected to my MacBook Pro but when trying to print on windows xp network.. nothing happens.
Sometimes it says not authorized some time it keeps on trying.Â
When adding a printer I choose windows and I see it and can add it . The driver is available and everything works fine....But it doesn't print or it seems MBP can't send information to that computer which has the printer. The printer on that computer (XP) is shared . Â
I have a Dlink DIR-615 router and we all are connected to it. Should I follow a defined procedure or what? Idon't know what to do . I even couldn't print a single page..
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)
I just installed MAC OS LION after snow leopard and now I can't get the iMAC to communicate with my canon printer. I installed the canon drivers again but still no go.
View 2 Replies View RelatedI am trying to print via wireless from my iPad (3rd generation) and iPhone 5 to my new canon MG3520 -- but it seems I have to set this up first to use with airprint? How to do that---? Â
OK I set-up the LAN (first connecting printer to the MacBook Pro running 10.8.5) via USB and then removed the USB cables so that now the iPad and the iPhone can select the printer - but it just prints blank sheets of paper and says there is an error each time.Â
Info:
MacBook Pro, OS X Mountain Lion, Also a Mac SE running 6.0.4 - not upgrading that!
this may be sort of a noob question but I was hoping someone could help me out. I have an HP photosmart 8050 printer hooked up to my iMac via USB. The thing is my girlfriend uses my other 2 dell laptops mainly for school while I use my iMac for school. All of these computers are on the same network and are scattered around my house.
So being in school we need to print out a lot of documentation and wanted to just have the printer setup wirelessly. I have a modem w/ the wired/wireless router, and all my computers have internal wireless cards.
I recently bought a Macbook (the new one with the white unibody) running Snow Leopard. I also bought an airport extreme base station to run my external harddrive and to print wirelessly. My problem is that I can't seem to add the wireless printer to the printers list. Each time I try, the computer recognizes the printer on the network but I can't select drivers for it in the 'Print Using' menu. I already have the printer drivers on the computer (I got a link from Canon customer service and downloaded the CAPT driver installer)
View 6 Replies View RelatedI am unable to set up our office Canon image Runner 3225 (iR3225) network printer up. I have followed the steps on both the canon, and apple site. I have also tried driver UFR II (2.24), and other drivers as well. I can look at the printer online but it will not locate it in setup no matter what I do.
I am running OS X Lion 10.7.3
I would like to use a perfectly good Canon Pixma ip4200 printer with OSX Mountain Lion 10.8.5 and  Yosemite 10.10.1 on my 2013 model iMac but Canon say they do not do a driver for these more recent versions of OSX later than 10.7. Is there any way to get this to work?
View 1 Replies View RelatedI have 2 new I-Mac computers set up on a home network. I have my new Canon D480 Multifunction printer connected to one of the Macs ("Mac #1) by USB and it prints perfectly with the driver recommended in the printer manual downloaded from the Canon site. I have Printer sharing turned on. The printer's name on Mac #1 is Canon D460-490 (UFRII LT) which is the name that was automatically given to the printer when I downloaded the drivers and installed them.
However I am unable to print to the printer from the second new Mac ("Mac #2") although I have downloaded the same printer driver and have added the printer on Mac #2. The printer's name on Mac #2 is Canon D460-490 (UFRII LT) @ Mac #1.I go through the motions of File, Print, but nothing happens.