I can print wireless but I can not scan wireless. Why? I am connected by wire from the canon 490 direct to my airport so why is it the scanner will not work? Can anyone explain ?
View 4 Replieshow to get the scanner on a Canon MP800 scanner/printer to scan with Lion software. I've installed the Canon Version 3.0.4 driver but it still doesn't work.
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
I just purchased a Canon MG5220. I have installed all of the updated drivers for 10.7.3. The scanner is working wirelessly, but I can't add my printer.
Info:
Mac OS X (10.7.3)
I'm trying to get my Canon SmartBase MP390 to work with my Mac, and I need to be pointed in the right direction, assuming there is a right direction. Aren't there any open-source Linux drivers or something that I can use?
View 1 Replies View RelatedI have a Canon MP460 connected to my iMAC however I am unable to scan. I can print perfectly and would like the scan capability to work. How do I get the scan to work?
Info:
iMac
After upgrading to Maverick on my 2.93 GHz Intel core 2 duo processor with 4 GB memory and a 10.9.4 version for my OS X my canon MG5220 all in one printer scanner shows as MP Navigator EX quits unexpectedly.
Info:
iMac, OS X Mavericks (10.9)
I have downloaded Canon driver 10.51.2.0. I tried Navigator Ex 3.1 . All Apple updates have been run. I tried removing printer and bonjour scanner and reinstalling. All ng. I cannot launch from " Solutions Menu ". Printer does print. If I try and scan from image capture it scans very very slow and is not accurate. I tried connecting with a usb cable and not using the wifi. Still ng.
Info:
iMac, Mac OS X (10.6.8), Canon Mp560 Driver 10.51.2.0
A few days ago I finally upgraded my iMac G4 (Flatpanel) from 10.4.9 to 10.4.11. I had not printed or scanned anything since then, but today I needed to do both, and they don't work. I think it has something to do with the upgrade because they were working just fine before that.
The printer is an Epson Stylus 777i
The Scanner is an Epson Perfection 640U
What could have changed, and how can I get my Mac and peripherals to work together again?
I replaced my hard drive and cant get my canon mp490 printer to work. My timeline backup had old printer drivers but cant seem to find new printer.
Info:
iMac, Mac OS X (10.7.4)
I have a HP Photosmart B110 printer/scanner and I'm running OSX 10.7 Lion, I have no dramas printing but the scanner is not recognised.If I go to System preferences> Print & Scan, it shows the printer but won't show the scanner!! I obviously want and need to use the scanner but am unable!
Info:
MacBook Pro, Mac OS X (10.7.3)
My iMac and Canon scanner "aren't friendly" with each other. Only the very first time I succeeded to obtain my scanned doc saved as pdf. Later on the scanner simply started quitting after having scanned the doc.
View 2 Replies View RelatedI was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I have updated to lion and now I can't use my scanner canon N670U and phone Nokia C2-01. Is the solution now to waste lion and reset to snow leopard??
Info:
MacBook, Mac OS X (10.7.3)
I have just upgraded to OS mavericks. My Canon MP550 printer, scanner worked fine on the old Mac. However, with the new Mac the printer works but the scanner doesn't. What should I do to make it work?
Info:
iMac, OS X Mavericks (10.9.3)
I have 2 new I-Mac computers set up on a home network. I have my new Canon D480 Multifunction printer connected to one of the Macs ("Mac #1) by USB and it prints perfectly with the driver recommended in the printer manual downloaded from the Canon site. I have Printer sharing turned on. The printer's name on Mac #1 is Canon D460-490 (UFRII LT) which is the name that was automatically given to the printer when I downloaded the drivers and installed them.
However I am unable to print to the printer from the second new Mac ("Mac #2") although I have downloaded the same printer driver and have added the printer on Mac #2. The printer's name on Mac #2 is Canon D460-490 (UFRII LT) @ Mac #1.I go through the motions of File, Print, but nothing happens.
this canon 4400f is a fine scanner but does not have an on off button.it powers up with computer start up, but eventually powers down.how do i set preferences, etc. so it only powers up when directed?i have searched manual but found nothing.
View 1 Replies View RelatedI just bought me a brand new Canon DR-2020U, but to my dismay, I noticed that it doesn't have OS X drivers, and OS X doesn't even flinch when I connect the scanner to it.
I googled for drivers, but the official site does not say anything about those drivers. I have, of course, the Windows drivers and I can operate it through Parallels, but I feel a little stupid for paying $700 for a scanner which does not have necessary drivers to operato on my OS X.
I have a Canon MP600 scanner/copier/printer. It's connected to my MacBook which I purchased in Sept 2007. I have 10.5.2 on my computer. Computer's HD failed after 4 months, then flex cable (BUS cable?) had to be replaced about a week ago. Scanner worked fine before 10.5.2 and the hard driver failing.
Scanner scans the document, but a screen pops up on the computer that says "Unable to save file. The system cannot find the path specified."
I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.
Info:
iMac, Mac OS X (10.6.7)
This is not a Canon problem as other computers (PCs) detect the scanner and work fine. This was originally the easiest multi-function printer/scanner setup I ever did.The scanning is easy and worked fine for a couple of months, then several days ago it gave "scanner not available" message,tried deleting the scanner and then adding, now it will not detect the scanner ONLY the printer
Info:
iMac, Mac OS X (10.7.3)
I've browsed the site for awhile now, but this is the first time I've had to post.
I recently tossed my old printer due to the scanner going bad, and picked up a new one. It's an Epson NX400. I've gone through the install disk, done what needs to be done, but I've got a problem.
Whenever I go to add it in the printer utility window, all I can do is highlight it. To clarify, it's showing up just fine under the 'Printer Name' section, and the 'Name' and 'Location' both fill in with the appropriate information when highlighted, but the 'Add' button doesn't become selectable.
It forces me to look through the 'Print Using' window, where the desired printer is nowhere to be found. This also happened when I tried hooking up an HP printer.
I've been scratching my head going through every support site I could find, but I'm giving up. Anyone familiar with a fix?
mainly to be used as a color scanner and to print coupons.
Info:
iMac, Mac OS X (10.7.3)
Esteemed List: I have an Epson Stylus CX6000 copier-printer-scanner. I have a newish Intel 2.13 GHz MacBook, OS 10.6.2 (Snow Leopard) with 2 GBs SDRAM and PhotoShop Elements 8. I migrated all my compatible software from a G4 12" PowerBook running OS 10.3.9, including the Epson software package - printer drivers, scanner, etc. - and the printer/copier works fine but neither Elements nor the laptop recognize the scanner software. The Epson site has a "complete" driver update for Snow Leopard that supposedly covers these issues. There is a warning that some parts of the drivers require OS 10.5, which this laptop never had. My question: is it safe to download and install these updated drivers? Do you have any suggestions?I do a fair amount of scanning work and need to access the Epson.
White 2.13 GHz Macbook, OS 10.6.2, 2 GBs SDRAM; Epson Stylus CX6000, Epson Scan 2.90 software; Epson Printer Utility and Epson Printer Utility 2.
Anyone care to offer a recommendation for a Mac-compatible all-in-one (printer/copier/scanner/ +/-fax)?
I am thinking about the Canon PIXMA MX860. My only concern about it is I currently have a (much) older Canon that uses Canon's MP Navigator 2.0 software and I find it somewhat clunky and buggy (and the included OCR is crappy).
Curious if anyone knows if the MX860 comes with better Mac software. Or if there are better alternatives to this all-in-one.
I need to find a good scanner / printer for an Intel MAC for my COO, laser if possible but not necessary. I'm more interested in something that has scanning software or can be used by Adobe Acrobat to scan PDF's etc. Something that won't need all kinds of third party to actually use the scanner.
View 6 Replies View RelatedI have an hp photosmart 4200 that is plugged into an airport base station.
One problem though... When I scan something I have to break out my laptop and plug it into the printer directly to get the scan. The printer, as far as I can tell won't send out the scan via the airport.
If I buy the new photosmart with wifi & Bluetooth and put it in the other room will it send my scans to my iMac in the other room?
Sounds like it should but I've yet to see that work.
reccommend a printer/scanner all in one thats compatible with OSX Lion 10.7.3?
Info:
iMac
i am in very awkward situation.
i have old dell desktop (without monitor), lexmark all in one printer (which does not support Mac OS), Samsung laser printer (which also does not support Mac OS), Windows Laptop and a NEW iMac with wireless broadband router.
Question is because the old printers are not compatible with new imac, I need some solution to print and scan.
My options are:
- Connect old printers to desktop PC tower and connect PC tower to router via ethernet and use printers via sharing.
- Connect printers to windows laptop as needed but this restricts the use.
- Get rid of the two printers and desktop tower (which is not needed for anything else) and buy a new wireless all in one printer which works over both mac and windows. I can get �30 for the old desktop at local trader but nothing for printers as they are deemed worthless.
So I purchased a brother MFC 290C so I could both print and fax.
I was able to hook it up to my airport extreme base station (the n version) and set up the printing function from multiple computers. So I am happy with that.
However I am unable to set up the network scanning function because I need 1 of 2 pieces of info:
Either the IP address for the printer OR the mDNS service name..
Now the printer is hooked in to the base station using the USB port. What is the easiest way to find its IP address? I am not allowed to enter anything for mDNS, I have to browse, and I can not see any choices when I browse for it.
I need fast, double sided printing over wifi (b/g) with good support in 10.6.
Doesn't have to be a great photo printer, but I do need colour. Scanner needs to be good enough for docs.
I'd prefer it to work well with built-in software and not come encumbered with ancient clunky software that needs Rosetta.
I've currently got separate Cannon scanner/HP printer, but neither work well with 10.6 (eg no duplex printing on the HP).
Would appreciate up-to-date advice as most info out there on the interweb is vague or for 10.5.
