I recently purchased an Apple for the first time after years on PC's. I'd like all my pictures, music & other files currently on my PC on my Mac as well but I am having trouble getting them to communicate.
Info:
iMac
Can I set up a home network between my mac and a windows based laptop?
Info:
iMac, Mac OS X (10.7.2)
Not sure even where to start. I have the Apple extreme router, WD network drive and 2 express units throughout the house. Looking to access the netwrk drive from MAcbook and TV that has internet connect through BLuRay disk.Router is behaving ok and the network drive is set up.Not sure where to from here. Any manuals available to take one through step by step?
Info:
iMac, Mac OS X (10.7)
I changed my network name and now it won't connect to the internet.How do I put in the new password (that goes with the new name)?
Info:
Aluminum MacBook, Mac OS X (10.5.7)
Been using Mac Towers exclusively for years and years, and I'm now thinking about adding a laptop to my setup. I've seen the specs and all, but one question remains for the *unibodies* MacBooks: how easy is it to access the battery, HD and RAM to swap them myself?
View 4 Replies View RelatedI run a UMBP @ home and also have a work laptop connected to my LAN. I want to remote into my work laptop from my UMBP, but I am having trouble doing so. My work laptop has joint to the company domain and has Group Policy applied. However I made sure all the remote desktop firewall rules are open and I still can't remote into it. Work laptop is running Win7. My dad's pc is also a Win7 and I can remote into just fine.
View 2 Replies View RelatedBack at my parents house, my dad had an older Linksys Wireless G router where I would be able to see all of the other WinXP computers on the network along with their associated shared folders/drives/peripherals in the 'shared' tab on Finder's left side navigation pane. Since it's old, and my father doesn't fix what isn't broken, he doesn't remember how he set that up.
I'm looking to replicate this with my WinXP desktop and early 2008 MBP. I have a WRT310N Linksys router and WinXP SP 3. I've tried nearly everything, but the ease and simplicity of my dad's set up required nothing on the Mac side, whereas I'm seeing a lot of network configuration for most other methods.
On a side note, I'm hoping this will help me wirelessly connect an external HDD so that I can back up my MBP without connecting my USB Exteranal HDD to it ever night.
I got fiber optic internet installed, and setup a pppoe wired connection using the username and password given to my by my ISP, and it works beautifully. But I can't get the wireless for it setup. When I go to Airport utility (my router is a Time Capsule), I tell it to set up a new connection, give it a name and password, tell it to connect using pppoe and enter in the same username and password as given by my ISP for that, and finish and everything seems to go ok, and it shows that i connect to the network, but pages wont load...
View 1 Replies View RelatedI searched but couldn't find anything about this. I'm fairly new setting up networks. I have an AEBS with wireless N (NOT the new one which would solve my problem). I also have a Belkin wireless G router. I would like to set up a network where my new macbook can take advantage of the wireless N speed and not be slowed by my wireless G devices.
Current setup:
iMac (early 2006) wired to AEBS (G speed max if wireless)
iphone 3G wireless (G)
PS3 wireless (G)
Macbook wireless (N capable)
Is there a way to setup my AEBS so only the macbook sees it so it gets full wireless N speeds then use the Belkin G router for the other devices?
My home network setup is pretty weird and I am having problems connecting between my G4 with Leopard and my MBP with SL. Basically I have a static ip with a zyntex or something ADSL modem, then I have a switch and after the switch i got a 10Mbps Brack Firewall router and today I bought an Airport Express to get internet at places. I dont want to lay down cables. So anyway I noticed once I hooked up I can see my G4 but I cant connect to it. If I use a cable tho it work. Btw the airport is connected to the switch so is the G4, all the PCs are connected thru the brack router.
View 6 Replies View RelatedMy MacBook Pro doesn't get receive wifi very well in my office, but my partners PC laptop does. I know there is a way to set up internet sharing so that the PC shares its internet connection to my laptop, but I do not know how to do this.
I'm running Mac OS 10.5.8, he has XP.
Up until Friday, I had a Linux server in my office that among other things, served as a remote login using NXServer. The thing I liked best about NXServer was that all of the data was sent over ssh on port 22. This meant that along with the security of ssh, I also only had to open a single port. The Linux server has been taken offline and everything moved to a MacPro.
The only thing I don't have setup is a way to remotely login to my network. I know I can still log in with ssh but I would like to be able to run a GUI when I log in. What's out there that will allow me to do this? I know about VNC and have used it in the past but it lacks the single secure port option (I believe).
How do I do this? Wireless network setup, works great with my WM10 PC, but I want to set it up w/my macbook pro.
View 2 Replies View RelatedI have a Desktop PC running XP and a Black macbook 2007 which runs off wireless router.
I am trying to find info on printer wirelessly but having a hard time figuring it out.
I use the Apple Airport Extreme Base Station Dual Band as my main router. I use a new Apple Airport Express to extend the range of my AEBS and allow connectivity via Ethernet only. Problem: We want to be able to setup a NAS that will be accessable outside of our home network via the internet. We are looking at using a free software such as Free NAS. We are not able to figure out how to forward a port on the Airport Extreme to allow an FTP. Is this being complicated by the additional airport express? do we also have to change settings inside that router to allow this. We have scoured the internet for specific instructions on how to do this, but cannot get it resolved.
View 3 Replies View RelatedI want to set up a home network but I'm utterly clueless in networking so I turn to you guys for help I believe I should have almost all the components to set one up but I need some pointers.
I'm the only person in the house who uses a Mac, also have two Windows 7 desktops (one connected via wifi and the other ethernet). I also have a printer and a 500GB hard drive (the 3.5" IDE ones) that I want to hook up to the network.
I guess my end goal is to have all three machines in a "LAN" and play nicely together (file sharing and stuff), print documents through the network and have a "central backup".
Currently I have a Linksys wireless router with SpeedBooster (model WRT54GS), it doesn't have any USB i/o so I guess I will need a router with USB? If I don't get a router with USB then will I be able to print from my MacBook if the printer is plugged to another desktop? Perhaps a TimeCapsule?
I have a Macbook Air running Lion. I have been struggling to set up a network printer that has worked for years on Windows and Linux clients (I think it worked with Snow Leopard as well). The set up is a Silex print server C-6200U+ v 2.3.1 with a Canon ip4300 connected to it's USB port. The driver is version 10.51.2.0 and CUPS is version1.5.1. All the latest revs. Currently other clients on the network print using LPR to queue 'lp' on a TCP/IP port. In Windows 7 this is all configurable though the gui with a mouse so I'm not doing anything clever. I have tried a number of iterations of set up on the Mac using CUPS Admin interface and also the System Preferences route. The closest to success has been to set it up as LPD protocol on a fixed ip address with queue 'lp', from this configuration I can successfully print a test page from CUPS or 'Print and Scan'. However when it comes to a 'real' print job from Preview or Word or Adobe, nothing much happens. The print queue says it is 'copying the Print Data' or similar but it just hangs indefinitely.
Info:
MacBook Air (11-inch Late 2010), Mac OS X (10.7.1)
i do not want the windows laptop to gain access to my mac but i wanna access and transfer files from the windows laptop to my mac.
im basically using my xp laptop as a downloading device.
is it something easy to set up?
what will the speed be like?
by the way i also have a firewire cable. i did connect the firewire cable to my xp laptop but the mac cant see it. something on xp came up saying it should install a software but couldnt find it when looking up on the net..
i would prefer wireless connection but if firewire is easier and much faster then yeah firewire is ok.
I have a credit card terminal I want to use at a farmers market and it has a phone jack and an ethernet jack. If I have my laptop connected to my iphone via the hotspot (wifi), how can I get the terminal to see the laptop as a network? I assume if I just plug it into the the lapto via ethernet cabel, it will not see any connection for use, though I have not tried this yet. Is there some sort of interface or connecter that goes between the two so I can share my connection with another piece of hardware?
Info:MacBook Pro (17-inch Mid 2010), iOS 5.1
I have had my iPhoto library on a USB drive attached to Time Capsule for some time with no problems. I recently upgraded to iPhoto '09, and still had no problems, so not sure that's related. The library updated ok, and I played with Places and indexed some Faces over more than one session, no problems. Upgraded iPhoto on all the macs and tested their access to the library ok.
Suddenly now, none of the network macs can open the library. iPhoto launches with no pictures visible and has a spinning beechball. I have to Force Quit iPhoto. Same on all macs.
I then copied the library from the networked drive locally to a mac, and iPhoto could then open it perfectly ok. So I guess the library is not corrupt either.
Any ideas why this network setup would suddenly stop working?
We just got new internet today. Our old internet was the built-in airport connecting to our slow hughesnet internet. Now I have an AT&T aircard that's fast, but has a 5 GB per month bandwidth limit. I just plug that into my USB, open the "sierra wireless watcher" application, and click connect. quit, and I'm good. Since it's not an airport network, how can I set up time capsule to find the network? I tried plugging the aircard into the USB of the time capsule, but I'm not sure if that works, or where to go in the airport utility once I do that. Will backing up my computer use up the bandwidth?
View 3 Replies View RelatedI've got a Satallite dish system and two routers. I have router B plugged into Router A. Router b Everything is disabled, DNS, Gateway, **** like that, including DHCP. Router A has DHCP enabled, MAC Address Filtering, and DNS and Gateways for the dish system entered. I'm running this setup for my little out post in Iraq. The dish is plugged into the "uplink" port in back of the router, Both Linksys, btw. So I've got 30 people or so on this router, and some one, i fear is passing alot of crap and hogging all the network bandwidth. I suspect SpyWare/Adware of Virus problem on one or two machines. Is there anyway to setup my Mac or a Windows Machine to accept all the data through a network card, and then pass that data up to the satallite dish? I just need to see who's sending all this data and the Linksys logs are crap.
View 3 Replies View RelatedI saw the excellent sticky on sharing files with a PC - I need some help even more basic - I have an Imac running 10.5.7 and my daughter has a new Win Laptop - I have tried setting up a network and sharing my internet connection and it looks like all of the correct things have been done but the laptop can not connect to the Mac - it can see it fine but can't hookup -
View 18 Replies View RelatedI have Time Warner cable and they told me that their high speed internet cable service comes with 2 IP addresses. Well, I have 4 computers. Now it was my understanding that only the router needed an IP address and the computers on the network access the internet via the router, i.e. 2 IP addresses should be more than enough. I have been trying to configure my time capsule to work with all of my computers with no success. Only 2 can access the internet. I Have a mac mini, 2 mac book pros and a pc.
View 2 Replies View RelatedI'm just wondering if an applescript could be able to create setup and start a private network.
Info:
mac mini, Mac OS X (10.6.4)
To date I've used an airport express as a wireless router for my macbook and macbook pro. Both have been manually backed up routinely on external hard drives. I use the macbook as my main media center/media storage and the hard drive is starting is nearly full. I'd like to set up a system where I move my media to an external hard drive and also automate the backup of the mb, mbp, and external hard drive. Would time capsule be the best approach for this and will it backup an external hard drive tied to its usb port. Alternatively, could I tie 2 external hard drives through a usb hub into airport extreme, using one for backing up the laptops and the other external drive?
View 5 Replies View Relatedim off to college in 2 weeks and would like to set up a wireless network in my residence room with my airport express. Its a small room, but i would still like to be able to move from my desk to bed or whatever without wires, and also i would like to be able to hide my printer somewhere. Heres the catch. My residence doesn't allow wireless networks for some reason. I know i can make my network hidden. But will that be enough to keep them from finding out? I imagine every now and then they might just scan for networks to see whats out there. But if mines hidden, i shouldnt have a problem, correct? Just want to make sure. Not sure what the consequences are, but im sure they would just ask to shut it down.
View 21 Replies View RelatedWould like to set up old computer to airport extreme wireless network. Purchased a usb adapter.
View 10 Replies View RelatedI'm sort of new to the Time Capsule and still trying to wrap my head around all the different services. Currently I've setup my Time Capsule via ethernet and have setup mobile me on it. I've been trying to setup 'back to my mac' with no luck, the time capsule never shows up in the mobile me account. I'm able to connect to the Time Capsule via AFP protocol, but I couldn't find any documentation detailing the level of security of this connection. So far all that I've found is that my documents are being sent as clear text, not even the slightest hope of SSL. I would hope that enforce SSL and deny clear text connection would be an option but I couldn't find it in the control panel.
My last question is regarding the Time Capsule network share option. Obviously the share works well, as it can be access by any computer, but how would one setup the Time Machine to back it up too? As of right now it seems that the general belief of having your network share on the device that backs up your mac, means that the network share itself is being backed up. This is obviously not true, unless it's setup. I may have been caught in the middle of apple commercial propaganda and therefore believe that the peripheral can do more than it physically can.
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View Related
