I have a Desktop PC running XP and a Black macbook 2007 which runs off wireless router.
I am trying to find info on printer wirelessly but having a hard time figuring it out.
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View RelatedI've just got a new Brother HL-210w wireless printer, but the wireless setup has got me completely baffled. Has anybody set one of these up wirelessly? I'm following the directions in the book and using the CD, but I cannot get this printer to work.
View 3 Replies View RelatedI have a mac laptop that works well on my verizon wireless router. I have a HP printer attached to the router. It works well with 2 windows wireless PC's. How do I set up the mac laptop to print on that printer?
View 1 Replies View RelatedI got fiber optic internet installed, and setup a pppoe wired connection using the username and password given to my by my ISP, and it works beautifully. But I can't get the wireless for it setup. When I go to Airport utility (my router is a Time Capsule), I tell it to set up a new connection, give it a name and password, tell it to connect using pppoe and enter in the same username and password as given by my ISP for that, and finish and everything seems to go ok, and it shows that i connect to the network, but pages wont load...
View 1 Replies View RelatedHow do I do this? Wireless network setup, works great with my WM10 PC, but I want to set it up w/my macbook pro.
View 2 Replies View RelatedI've been working on this for about 8 hours and I'm going nuts. I am using an Imac OS X version 10.5.8.I purchased a Canon MP560 today and can't figure out the problem. I don't even know where to start. I'm trying to connect the wireless printer using Airport. There is nothing listed when I click on 'Preferences- Print and Fax'.
I read the instructions that came with the printer several times, up to a point. I clicked 'wireless lan setup' on the printer. It's asking me for a lan access point and a wep key. I've used Google until I can't even think anymore. I read Airport is like a router, or can be used as a router. The blue light is on on the printer, and it says it's searching for a connection but can find one.
I have Time Warner cable and they told me that their high speed internet cable service comes with 2 IP addresses. Well, I have 4 computers. Now it was my understanding that only the router needed an IP address and the computers on the network access the internet via the router, i.e. 2 IP addresses should be more than enough. I have been trying to configure my time capsule to work with all of my computers with no success. Only 2 can access the internet. I Have a mac mini, 2 mac book pros and a pc.
View 2 Replies View RelatedI plan to upgrade from 10.4.11 to 10.5 on my PM G5. Will I have to reset any of my wireless net work settings after upgrading to 10.5.
Currently running wireless with an Airport Express and a wireless printer.
i connected it to my Airport Extreme and not the USB because i want to use the scanning and faxing features. so how can i configure it? when i connected it via USB it recognized it but when i connected it to ethernet it didn't...
View 1 Replies View Relatedim off to college in 2 weeks and would like to set up a wireless network in my residence room with my airport express. Its a small room, but i would still like to be able to move from my desk to bed or whatever without wires, and also i would like to be able to hide my printer somewhere. Heres the catch. My residence doesn't allow wireless networks for some reason. I know i can make my network hidden. But will that be enough to keep them from finding out? I imagine every now and then they might just scan for networks to see whats out there. But if mines hidden, i shouldnt have a problem, correct? Just want to make sure. Not sure what the consequences are, but im sure they would just ask to shut it down.
View 21 Replies View RelatedI've been trying all day to get my new wireless printer to find my wireless network. No joy.
I have an airport extreme router connected to an AT&T 2WIRE modem. The guys that installed the AT&T stuff recently said I normally wouldn't need the airport extreme because the 2WIRE serves as both modem and router, however it does not work with an airport express, which I have in another room to boost the signal. So when the printer looks for the (SSID) network, it sees my apple network, which is what my macbook and windows vista laptops also see and connect to. After that, I'm entering the wireless network key from the 2WIRE.
I am running Win XP Pro, and my wife is running OSX with the printer connected to that via USB. How do I allow my comp, running Boot Camp, to see the printer connected to her comp?
View 1 Replies View RelatedMy MacBook Pro is connected to a wireless Belkin network with no issues, but I cannot seem to add the printer to the same network.Â
Info:
Mac Pro, Mac OS X (10.7.4)
I have a wireless network that includes a printer, a pc, and my MacBook Pro. When I go into system preferences and printers the wireless printer does not appear in the list. What do I need to do to add this wireless printer to my MacBook Pro?
Info:MacBookPro, iOS 5.1.1 When I go into system preferences and printers the wireless printer does not appear in the list.
I bought an Epson C2800N which is a network laser printer. It is connected to my router with "ethernet" cable. I am able to connect to my printer over cable connection (when i have my MPB network connection with "ethernet" cable) but when I use the wireless connection (airport) I can't connect to my printer. It happens with my MBP17 and my bro's MBP15'.
View 5 Replies View RelatedLooking for a Wireless color all in one laser printer, It looks like Brother is the only one that makes it? I also heard you can't scan or fax wirelessly, only print? These three are in the $300-$500 range. Price is not a concern, quality is, as is wireless printing if possible or at least attached to my Time Capsule. Which would you choose, or would you recommend something else? - HP Color Laser All in One CC431A#A2L - Brother Wireless All-In-One Laser Printer (MFC7840W)- Canon Color imageCLASS MF8050CN Multifunction Printer
View 4 Replies View RelatedMy hp printers will only print b+w over my network. My 9650 is too old I guess there are no drivers from hp but my 6980 has lion drivers.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
Question: Can a wireless printer 'join' an Airport Express Network? The printer in question is not near my router, can the printer join the network wirelessly so that I can print w/o a USB connection?
View 4 Replies View RelatedI am a new intern with a small company and am trying to connect my Macbook Pro's printer settings to our office printer, which is a LanierLD145. We halso have an HP3600 on the same wireless network which my Macbook can detect and print to just fine via the shared network server. However, when I try to find the LanierLD145 I can't find it anywhere on my shared network or via a wireless to connection in order to print to it from my laptop.
I have access to the desktop I believe the printer is routed to the server through and have "shared printer with network" via this computer. However, I still cannot find the LD145 icon on my macbook when I try to connect and print, even when going through the "Windows"-> (shared server) route. I've also installed apple's "general lanier printer driver" in hopes have luck finding the printer if I have the driver installed, but that has not worked either. How I can connect the macbook to the LanierLD145 via my wireless server connection?
Info:
MacBook Pro, Mac OS X (10.6.8)
I'm trying to get used my first iMac, and I'm having a bit of trouble printing from my wireless network. I have an HP Officejet 6210 that I have been using for the last couple of years with my Windows computer. I'm trying to print off of that through my network, but I keep getting this error
"There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again."
I have printer sharing turned on through my Windows computer since the printer is connected directly through my windows computer. My other Windows computer that I have at the house can print through the network, but I'm having problems doing so with my iMac. I have the right driver selected through system preferences/print & fax, but it just won't print.
Any suggestions about what I'm doing wrong, or is there something I'm missing?
Lexmark 4310 series printer will not print after printing first job after setup. Msg in printer window says printer not connected however the green light is solid on the printer. Lexmark tech support says the issue is with comcast router. Comcast says issue is mac related because both macs fail to print while HP machine works fine....
Info:
MacBook Air, Mac OS X (10.7.3)
Have installed HP 3500 printer driver on iMac, but can't get iMac to recognize that the printer exists so I can select it as my default printer
View 4 Replies View RelatedHave installed HP 3500 printer driver on iMac, but can't get iMac to recognize that the printer exists so I can select it as my default printer
View 6 Replies View RelatedI have a pre-Intel iMac G5, running OS 10.5.8. I have been using an HP LaserJet P3005, connected with a USB2 cable, with no problems. The fuser got "muddy" on the 3005 so I bought a new HP LaserJet P2035n. I've loaded and reloaded the printer software from the provided CD, downloaded the driver software from the HP support website, but the computer doesn't recognize the printer. Called HP support and everything they suggested came up empty; they told me to exchange the printer for a another new one, but I get the same results with it. I'm using the same USB cable I used with the 3005 -- it worked perfectly with that printer as recently as this morning. What's wrong with my iMac or setup?
View 5 Replies View RelatedWhen I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
View 3 Replies View RelatedI have had my MacBook Pro now for a little over 2 yrs and I was very frustrated I could not change any print options in any application. I know that the Triangle button expands print options screen but when I do, I have only two print choices. It gave me Standard or Page Attributes in Office and any other App it is Standard and Last used settings. I can't print in Draft, Best or other setting because it does not even give them as a choice. I have two high end color photo printers, Canon i9900 and Epson Photo series and an old HP830 series. Any app I tried to print from and the same thing. I tried to capture the options on the choices but it would not grab that part of the image but here is my screen shot. I searched many forums and I still get the same answer so something else is not letting me change things so I figured best to ask since I am a 20 year win user now switched to Mac. Well right after I posted this question, my wife found the answer. I never though to check the application NAME in the print setting screen. Example, in the screenshot I am using Preview. I never thought to hit the up/down arrow next to the Preview label and wouldn't you know, that is were the quality and several other settings were. I felt pretty stupid that it took 2 years to figure this out but if I posted the answer maybe someone else will not have to take as long as I did to change their print quality!
View 1 Replies View RelatedI have a G5 Duel 2GHz Power PC, Recently I was losing the time, date and wireless settings so I assumed as my machine is now 4 years old the PRAM battery was up for renewal.This has now been replaced but I'm still losing my settings, not all the time but randomly, sometimes I lose my wireless key sometimes I lose time and date sometimes both, this can happen daily.
I have removed the (New) Battery and checked the voltage and it reads 3.6 Volts, I haven't checked this under load though, so presuming that the battery is OK, what else could cause this.. a failing System Board?
I am trying to setup a firefighter's apple laptop into our linksys net at firestation. She got access fine when we did not have it secured but now we setup a wep key. All other members can get in by entering wep key when they choose the wireless router but when we input the wep key to apple laptop airport I think we get connection error. Key is definitely right. What changed in the apple setup other than the wep key, again when signal was unsecure laptop safari worked fine. The linksys is a B about 3 years old.
View 9 Replies View RelatedI have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
View 5 Replies View Related