We just got new internet today. Our old internet was the built-in airport connecting to our slow hughesnet internet. Now I have an AT&T aircard that's fast, but has a 5 GB per month bandwidth limit. I just plug that into my USB, open the "sierra wireless watcher" application, and click connect. quit, and I'm good. Since it's not an airport network, how can I set up time capsule to find the network? I tried plugging the aircard into the USB of the time capsule, but I'm not sure if that works, or where to go in the airport utility once I do that. Will backing up my computer use up the bandwidth?
I have Time Warner cable and they told me that their high speed internet cable service comes with 2 IP addresses. Well, I have 4 computers. Now it was my understanding that only the router needed an IP address and the computers on the network access the internet via the router, i.e. 2 IP addresses should be more than enough. I have been trying to configure my time capsule to work with all of my computers with no success. Only 2 can access the internet. I Have a mac mini, 2 mac book pros and a pc.
To date I've used an airport express as a wireless router for my macbook and macbook pro. Both have been manually backed up routinely on external hard drives. I use the macbook as my main media center/media storage and the hard drive is starting is nearly full. I'd like to set up a system where I move my media to an external hard drive and also automate the backup of the mb, mbp, and external hard drive. Would time capsule be the best approach for this and will it backup an external hard drive tied to its usb port. Alternatively, could I tie 2 external hard drives through a usb hub into airport extreme, using one for backing up the laptops and the other external drive?
I'm sort of new to the Time Capsule and still trying to wrap my head around all the different services. Currently I've setup my Time Capsule via ethernet and have setup mobile me on it. I've been trying to setup 'back to my mac' with no luck, the time capsule never shows up in the mobile me account. I'm able to connect to the Time Capsule via AFP protocol, but I couldn't find any documentation detailing the level of security of this connection. So far all that I've found is that my documents are being sent as clear text, not even the slightest hope of SSL. I would hope that enforce SSL and deny clear text connection would be an option but I couldn't find it in the control panel.
My last question is regarding the Time Capsule network share option. Obviously the share works well, as it can be access by any computer, but how would one setup the Time Machine to back it up too? As of right now it seems that the general belief of having your network share on the device that backs up your mac, means that the network share itself is being backed up. This is obviously not true, unless it's setup. I may have been caught in the middle of apple commercial propaganda and therefore believe that the peripheral can do more than it physically can.
Ever since I updated to 10.6.1 I've had the following problems:
- Time Machine does not work at all with my Time Capsule. When it attempts to back up my data, Time Machine gets hung up with a status of "Making backup disk available..." and the icon in the menu bar just spins forever (the status appears in the menu bar icon's menu). I also cannot enter Time Machine; it gets hung trying to connect to the Time Capsule and I have to cancel it. Finder then takes up 100% CPU and I have to power down by holding in the power button (shutting down from the Apple menu doesn't work).
- I store my iTunes library in a folder called Music under the Data folder on the Time Capsule. When I open iTunes, it prompts me to choose my iTunes library. When I do, it starts to load the list of albums, then iTunes locks up and I must force quit it. This also causes my machine to not be able to shut down or restart from the Apple menu.
Oddly enough I can still access the Data folder from Finder with no issues. I just wanted to put this out there in case other people are having similar problems. It's pretty frustrating as all this worked fine before the 10.6.1 update.
I just installed a new HD in my mac pro to replace my dying HD and i transferred all the data over using disk utility, but when I go to set up my time capsule my new HD does not appear in the list? what gives?
I've got a Time Capsule attached to an Ethernet network, which gets it's internet access from DSL. I can't seem to get the configuration I want. I'd like it to be part of the ethernet network, available to Macs on the network and I'd like it to act as a wireless access point for Macbooks and Macbook Pros. But when I go through the Airport Utility install, once I tell it it is to connect to the network, which already has internet set up through DSL, then it won't allow me to set up wireless. It's as if it wants to work one way or the other. And the instructions are confusing about which port in the back of the unit to insert the network cable. I did manage to get it set up and connected to the network, and to deliver wireless, but I ended up creating a "bridge" and doing things I did not quite understand.
I ended up creating a wireless network and I guess "bridging" that network with the ethernet. Maybe that's the right thing to do, I don't know. Maybe I'm just not understanding the terminology right. is "creating a wireless network" the same thing as merely creating a wireless access point for a wireless device to connect too? I guess I was thinking that they were two different things, maybe not. So, it's probably a simple thing, and I hope someone can just tell me in what way I am supposed to set up the Time Capsule. I know I got it working, but I can't even remember how after a zillion tries I even got it working right.
I got the iMac Wednesday and have been setting it up all week/weekend. I finally down to the end of getting time capsule setup. Here's what I'd like to have: Internal iMac HD: 500gb time capsule HD: 1tb (750gb backup, 250gb usable space)
Right now I've got it set up and I'm about to pick the drive in time machine, but it looks like as soon as I do that it's going to just start backing up my internal HD to the time capsule's HD? Will I later be able to set aside 250gb of time capsule space to use as storage? Do I need to set up something before I backup to it? Is this even possible, or is this what everyone is talking about when they say time capsule can't be used as a NAS?
I currently have a Netgear DG834G Wireless ADSL Router. I would like to purchase a Time Capsule and set it up as a wireless bridge. The Netgear is downstairs in the living room and has my Xbox, Xbox 360 and HD DVD player plugged into the Ethernet ports. My iMac and girlfriends MacBook connect wirelessly. My question is can I use the Time Capsule in Bridge mode and utilize the Ethernet connections for my iMac? This way backups will be much quicker to the Time Capsule. If anyone sees any areas in my setup that could be improved please let me know.
I'm thinking of getting the 500gb Time Capsule for my new iMac's backups. Should I use a usb or firewire cable for first time backup, then wireless for the scheduled backups after that? An alternative I've also thought about is just getting the airport extreme (for the wireless access and router) and use my Western Digital external HD.
I am interested in using a Time Capsule to run Time Machine automatic backup for both computers in my house (Mac Mini and Macbook). Is this easy to setup for two computers? The manual says on page 1 that it can do multiple computers, but nowhere else in the manual to they mention how to set it up.
Congratulations on purchasing your Time Capsule. Read this guide to get started. The new Time Capsule offers you the simplicity of fully automated backup for your WiFi network. Using the Time Machine application in Mac OS X v10.5.2 Leopard or later, it's easy and automatic to back up all the computers on your network to a single Time Capsule.
I have a TC set up at home and it works fine, just looking to get more out of it now, if possible. I run a small business and I want a contract employee to be able to access it for file use in a windows program. He lives in another state.
1. How can I direct him to my TC via internet? He only works in windows. Basically, I want him to have read/write access to my TC. 2. Obviously if number 1 can work, then how can I, using my MBP, connect to my TC when I am away from it (not home).
Do I do this with IP addresses and workgroups? If so, I don't know how to set that up.
I recently purchased a Time Capsule to use as a wireless hard drive. I connect to the internet both through wifi and ethernet to a educational network that does not allow extra routers, etc, to be added to the network, therefore I can not use the time capsule for this wifi.
I therefore want to connect to my early 2009 MBP17unibody to both the academic internet network for http/pop3/ftp/etc while simultaneously connecting to external hard drive to store data/itunes-library/etc.
I expect this has been asked before but I can't find any threads where it has. If anyone knows it would be highly helpful. I'd prefer to connect to both wirelessly but I could potentially put up with connecting to either or both with ethernet.
Right I have a draytek 2820n wireless router which I will not be replacing. I intend to buy a 1 or 2TB time capsule but was wondering the best way to set it up. Would it be best to plug this directly into the router? Or run it separately as a separate wireless network?
I just picked up the 2TB and I have a few questions about it. I also just recently talked to a buddy of mine that has the 500 or 1TB version of the TC, but it seems that the setup/options are a little different. For example I would like to just use the TC as N only on the 5Ghz band, but it doesn't allow for me to do that. I can check a box for the 5Ghz but it doesn't specify to use the N band only. The "transmit rate" is different as well. Now, I can only select low, med or high instead of 6mb, 10mb etc. What is the transmit rate and what can I do to optimize the TC for optimal performance? I wish I could screen share with someone so I can figure this out.
I'm currently staying in university residence where our internet access is all through wireless access point through the building; in this environment, is it possible to setup a time capsule such that it connects wirelessly to the nearest access point and then allows me to connect to it (the TC) wirelessly or by ethernet (then get an address by DHCP in the TC or the access point)? I was hoping to use the TC as a backup for my imac and macbook, as well as a mounting point for drives I plug into it but thus far haven't been able to come up with anything that works ideally (i.e. tried connecting all my stuff to the access point but the backup worked way too slow over 802.11g to do anything realistically when its shared among many other people).
I'm having trouble figuring out how to set up my Time Capsule. So I have two computers at home, a router and a Time Capsule. I mainly use the Time Capsule to back up my computers and transfer stuff between them. I also have roomies which I don't wanna give access to the Time Capsule without my permission, I'd just like to allow them to connect to get some files every now and then and that's it. That's been my problem, my roomies are having trouble with the internet connection because of my Time Capsule.
I picked up a Time Capsule 500GB and an AirPort Express 802.11n today. I am trying to setup my network as follows. Time Capsule as base station AirPort Express as as range extender
I would also like to set up the AirPort Express to use it's ethernet port to provide internet for my DirecTV HR20 HD DVR. I've currently got everything connected and running, and the HR20 gets an IP address, however, it says that there is no internet connection.
I have installed and have running a new Time Capsule. I would like to access files through the wireless network between two Apples and two PC's. At present the Apples are working wonderfully, however the PC running Windows 7 sees the network is unable to access it.
I just went through a long and complicated process that started when my apartment was burglarized and my laptop was taken, through getting a new laptop, replacing that harddrive and restoring from a backup of my old laptop. After all that, I hooked up my new laptop to the time capsule and restored everything via ethernet. I'm now using my TC as a network extender for the house, I can connect to it and see the files in there, but when I try to set up Time Machine to use it, it starts backing up my entire laptop all over again, which apparently would take 48+ hours over WiFi. I'm guessing that when I set it up earlier and made the backup, it was over Ethernet. Now, it can't find the time capsule over ethernet, and thinks that the time capsule via WiFi is a new source. Is there any way to select a time machine file to use and update? I'm using a 1st generation 1 TB Time Capsule with an uMBP 13", 10.6.5. All software is up to date.
I have my time capsule setup (green light and all). I can backup to it. I can access it and its folders from my new MBP. I can run the windows (and/or apple) Airport Utility and see and configure the TC within the utility but I cannot access it like a network drive on the XP box. I thought I saw somewhere to enter a workgroup name for PC networks but can't find it now.
I'm trying to connect 2 airport expresses with my Time Capsule to get my music from itunes to reach into my backyard (well over 100' away). I can get the 2 airport expresses to "participate in WDS network" but the Time Capsule setup in airport utility does not give me that option. There is on "create a wireless network" and "extend a wireless network". Why am I not getting "participate in WDS network"
I have a 1T time capsule. Right now my time capsule is connected to a modem/router from which i get my internet connection. But i wanted to connect my time capsule with a modem to get rid of the router(waste of space,small apartment). But from what i've read it seems that time capsule is awful when it comes to internet.
So what do you thing? Should i do it or not?Don't know if this is important but i have a 8mbps internet connection.
So I've been using a 1TB Time Capsule for a while now with my old HP and recently purchased a MacPro [15 inch base model]. My room mate has a recent model Macbook as well as an older iMac. We have a 50MBPS internet connection through our local ISP. More or less I am looking for advice on how to make sure our network is:
1. Secure. 2. Faster transfer speeds between all of our computers to and from the Time Capsule. [Where to find / adjust / optimize these settings] 3. Utilize our internet connection to it's fullest potential.
I am mostly concerned with my machine [optimizing it that is.] then the rest of the computers in the house. Go slow and use medium sized words as I am still wading into the world of Mac.