OS X :: Setup To Login Remotely And Securely To Network?
Jul 26, 2009
Up until Friday, I had a Linux server in my office that among other things, served as a remote login using NXServer. The thing I liked best about NXServer was that all of the data was sent over ssh on port 22. This meant that along with the security of ssh, I also only had to open a single port. The Linux server has been taken offline and everything moved to a MacPro.
The only thing I don't have setup is a way to remotely login to my network. I know I can still log in with ssh but I would like to be able to run a GUI when I log in. What's out there that will allow me to do this? I know about VNC and have used it in the past but it lacks the single secure port option (I believe).
View 1 Replies
ADVERTISEMENT
Dec 9, 2006
My new Xserve started up and I was able to configure it remotely via Server Setup Utility then after I input all of the settings it hung on finishing the setup for about an hour. I then restarted the Server and now I cannot see it.
View 2 Replies
View Related
Mar 28, 2012
I need to log into my work computer from home, since I purchased the IMac work say It wont work, there must be a way
Info:
iMac, Mac OS X (10.0.x)
View 1 Replies
View Related
Apr 15, 2010
G4 MDD networked with Mini for approx. 3 years now via a LinkSys BEFSR41 wired router. Ethernet cables are CAT6's with gold-plated ends. Did an erase/install (+ updates) of Panther on G4. ISP is Comcast Cable. Just upgraded my Motorola modem from Surfboard 5100 to SB 5101 yesterday. My network settings are ok...file sharing is turned on...I can ping each 'puter from the other (showing my connection is good).
I have internet access (showing that the router is still good according to Cisco). Now, however, I can't even bring up the window on the G4 asking for my pw....all I get is connection failed, no response from the server. From the Mini, I get Unknown User, incorrect password or login is disabled. I haven't a clue what the problem can be. Everything I do daily depends upon the network connection.
View 2 Replies
View Related
Jun 15, 2012
Not sure even where to start. I have the Apple extreme router, WD network drive and 2 express units throughout the house. Looking to access the netwrk drive from MAcbook and TV that has internet connect through BLuRay disk.Router is behaving ok and the network drive is set up.Not sure where to from here. Any manuals available to take one through step by step?
Info:
iMac, Mac OS X (10.7)
View 13 Replies
View Related
Feb 20, 2012
Have recently done a clean install of Lion onto a Mac Pro that was running Snow Leopard. Upgradede to 10.7.3 The Lion Mac sits on an office network of several macs running Snow Leopard and a Network Shared HDD. In order to gain quick full access to the other computers we have been using "connect as" then inputting the macs registerred user administrator details, we were able us access to the full Mac and it's currently mounted hard drives. Since installing Lion I can see and fully access the network share which only uses guest access, see the Other macs in finder, add to their drop boxes but not connect as a registerred user to access one of the snow Leopard machines. I get a pop up. Spinning wheel, and eventually a timeout. Can't even cancel this action as it comes up greyed out. Oddly the other macs can still log into the Lion machine. No joy so far toggling network preferrences and I'm pretty sure it's going to be a setting I have missed, So far have had not joy looking online or playing in seeing why it would now not be able to connect as before.
Info:
Mac Pro, Mac OS X (10.7.3)
View 9 Replies
View Related
Mar 20, 2010
Lost track of what I did yesterday when I was mucking about in Accounts but now when I start up or even log out and login I have to provide my password. How do I get rid of that login step ?
View 1 Replies
View Related
Dec 9, 2010
I just set up the Mail app but dislike that even after I quit the app if I click it again to reopen it it doesn't require me to re-enter my password. This means even if I close/quit it and walk away from my laptop anyone who uses it can just click Mail and they have complete access to my Gmail account.
I went into preferences but could not find where or how to require it to ask for my password after it's been closed. If there isn't an option then I will go back to copying an address when on a website then opening gmail and pasting it and emailing. Obviously using the Mail app would be more convenient for those types of emails but if it means my account is always open and available for anyone to read then I will go back to the longer method.
View 5 Replies
View Related
Dec 1, 2014
First the Details:
MacBook Pro, Retina, 15-inch, Late 2013
OS X Mavericks 10.9.5
USB 3.0 External Hard drive
I am currently using an external drive for my user storage. Right now I log in with a separate User account to mount the drive, log off, and then log in with my user. I am trying to remove the extra steps so I can boot my Mac and log right in. I have not found any method that pertains specifically to Mavericks, and all of the methods I have tried for older OS versions do not seem to work properly.
Info:
MacBook Pro (Retina, 15-inch, Late 2013), OS X Mavericks (10.9.5)
View 1 Replies
View Related
Aug 26, 2010
I got fiber optic internet installed, and setup a pppoe wired connection using the username and password given to my by my ISP, and it works beautifully. But I can't get the wireless for it setup. When I go to Airport utility (my router is a Time Capsule), I tell it to set up a new connection, give it a name and password, tell it to connect using pppoe and enter in the same username and password as given by my ISP for that, and finish and everything seems to go ok, and it shows that i connect to the network, but pages wont load...
View 1 Replies
View Related
Mar 8, 2009
I searched but couldn't find anything about this. I'm fairly new setting up networks. I have an AEBS with wireless N (NOT the new one which would solve my problem). I also have a Belkin wireless G router. I would like to set up a network where my new macbook can take advantage of the wireless N speed and not be slowed by my wireless G devices.
Current setup:
iMac (early 2006) wired to AEBS (G speed max if wireless)
iphone 3G wireless (G)
PS3 wireless (G)
Macbook wireless (N capable)
Is there a way to setup my AEBS so only the macbook sees it so it gets full wireless N speeds then use the Belkin G router for the other devices?
View 3 Replies
View Related
Oct 24, 2009
My home network setup is pretty weird and I am having problems connecting between my G4 with Leopard and my MBP with SL. Basically I have a static ip with a zyntex or something ADSL modem, then I have a switch and after the switch i got a 10Mbps Brack Firewall router and today I bought an Airport Express to get internet at places. I dont want to lay down cables. So anyway I noticed once I hooked up I can see my G4 but I cant connect to it. If I use a cable tho it work. Btw the airport is connected to the switch so is the G4, all the PCs are connected thru the brack router.
View 6 Replies
View Related
Mar 16, 2012
I changed my network name and now it won't connect to the internet.How do I put in the new password (that goes with the new name)?
Info:
Aluminum MacBook, Mac OS X (10.5.7)
View 1 Replies
View Related
Mar 25, 2012
I recently purchased an Apple for the first time after years on PC's. I'd like all my pictures, music & other files currently on my PC on my Mac as well but I am having trouble getting them to communicate.
Info:
iMac
View 1 Replies
View Related
Jun 7, 2012
I have a mac mini and macbook pro. As you will see, the issues are complex. I spoke to both Apple and my server many times: all determined to help solve the issue as a technical problem, but rather complacent about the strong possibility of new malware. Both ended up basically with 'dunno'. Needless to say, I backup regularly via time machine. These probs represent the downside! My workplace techs said one was probably flashback (dealt with as per apple advice), the other like dnschanger - but a new and more invidious version. I'm probably giving away too much information, but it's a bit late to worry about that.
Both did different things AT THE SAME TIME, with the same sites. Therefore, it was definitely not a server issue. Both were consistent.I've had odd behaviour: redirect included bypassing my proxy server and going online despite not putting in login details, and after logging in: in both instances, I was taken to Wikipedia front page. Also:Many times, lists of links instead of genuine front pages: Apple and server. Only 'big names' seemed affected. Other times, it looked ok but when I clicked on links I got nothing. I had problems logging on to App store and broadband provider, as well as software sites (2 x legit big apple-oriented companies). After the going online and redirect issue above, I decided to create new apple id and o2 email. I did a secure (as far as it goes) 7-layer wipe of the macbook, and reinstalled.Within a week, I had odd behaviours again. Two examples:
View 6 Replies
View Related
Sep 17, 2009
How do I do this? Wireless network setup, works great with my WM10 PC, but I want to set it up w/my macbook pro.
View 2 Replies
View Related
Sep 19, 2009
I have a Desktop PC running XP and a Black macbook 2007 which runs off wireless router.
I am trying to find info on printer wirelessly but having a hard time figuring it out.
View 7 Replies
View Related
Nov 18, 2009
I use the Apple Airport Extreme Base Station Dual Band as my main router. I use a new Apple Airport Express to extend the range of my AEBS and allow connectivity via Ethernet only. Problem: We want to be able to setup a NAS that will be accessable outside of our home network via the internet. We are looking at using a free software such as Free NAS. We are not able to figure out how to forward a port on the Airport Extreme to allow an FTP. Is this being complicated by the additional airport express? do we also have to change settings inside that router to allow this. We have scoured the internet for specific instructions on how to do this, but cannot get it resolved.
View 3 Replies
View Related
Mar 4, 2010
I want to set up a home network but I'm utterly clueless in networking so I turn to you guys for help I believe I should have almost all the components to set one up but I need some pointers.
I'm the only person in the house who uses a Mac, also have two Windows 7 desktops (one connected via wifi and the other ethernet). I also have a printer and a 500GB hard drive (the 3.5" IDE ones) that I want to hook up to the network.
I guess my end goal is to have all three machines in a "LAN" and play nicely together (file sharing and stuff), print documents through the network and have a "central backup".
Currently I have a Linksys wireless router with SpeedBooster (model WRT54GS), it doesn't have any USB i/o so I guess I will need a router with USB? If I don't get a router with USB then will I be able to print from my MacBook if the printer is plugged to another desktop? Perhaps a TimeCapsule?
View 1 Replies
View Related
Apr 18, 2012
I have a Macbook Air running Lion. I have been struggling to set up a network printer that has worked for years on Windows and Linux clients (I think it worked with Snow Leopard as well). The set up is a Silex print server C-6200U+ v 2.3.1 with a Canon ip4300 connected to it's USB port. The driver is version 10.51.2.0 and CUPS is version1.5.1. All the latest revs. Currently other clients on the network print using LPR to queue 'lp' on a TCP/IP port. In Windows 7 this is all configurable though the gui with a mouse so I'm not doing anything clever. I have tried a number of iterations of set up on the Mac using CUPS Admin interface and also the System Preferences route. The closest to success has been to set it up as LPD protocol on a fixed ip address with queue 'lp', from this configuration I can successfully print a test page from CUPS or 'Print and Scan'. However when it comes to a 'real' print job from Preview or Word or Adobe, nothing much happens. The print queue says it is 'copying the Print Data' or similar but it just hangs indefinitely.
Info:
MacBook Air (11-inch Late 2010), Mac OS X (10.7.1)
View 4 Replies
View Related
Feb 15, 2009
I have had my iPhoto library on a USB drive attached to Time Capsule for some time with no problems. I recently upgraded to iPhoto '09, and still had no problems, so not sure that's related. The library updated ok, and I played with Places and indexed some Faces over more than one session, no problems. Upgraded iPhoto on all the macs and tested their access to the library ok.
Suddenly now, none of the network macs can open the library. iPhoto launches with no pictures visible and has a spinning beechball. I have to Force Quit iPhoto. Same on all macs.
I then copied the library from the networked drive locally to a mac, and iPhoto could then open it perfectly ok. So I guess the library is not corrupt either.
Any ideas why this network setup would suddenly stop working?
View 1 Replies
View Related
Mar 18, 2009
We just got new internet today. Our old internet was the built-in airport connecting to our slow hughesnet internet. Now I have an AT&T aircard that's fast, but has a 5 GB per month bandwidth limit. I just plug that into my USB, open the "sierra wireless watcher" application, and click connect. quit, and I'm good. Since it's not an airport network, how can I set up time capsule to find the network? I tried plugging the aircard into the USB of the time capsule, but I'm not sure if that works, or where to go in the airport utility once I do that. Will backing up my computer use up the bandwidth?
View 3 Replies
View Related
Mar 25, 2009
I've got a Satallite dish system and two routers. I have router B plugged into Router A. Router b Everything is disabled, DNS, Gateway, **** like that, including DHCP. Router A has DHCP enabled, MAC Address Filtering, and DNS and Gateways for the dish system entered. I'm running this setup for my little out post in Iraq. The dish is plugged into the "uplink" port in back of the router, Both Linksys, btw. So I've got 30 people or so on this router, and some one, i fear is passing alot of crap and hogging all the network bandwidth. I suspect SpyWare/Adware of Virus problem on one or two machines. Is there anyway to setup my Mac or a Windows Machine to accept all the data through a network card, and then pass that data up to the satallite dish? I just need to see who's sending all this data and the Linksys logs are crap.
View 3 Replies
View Related
Jul 13, 2009
I saw the excellent sticky on sharing files with a PC - I need some help even more basic - I have an Imac running 10.5.7 and my daughter has a new Win Laptop - I have tried setting up a network and sharing my internet connection and it looks like all of the correct things have been done but the laptop can not connect to the Mac - it can see it fine but can't hookup -
View 18 Replies
View Related
May 17, 2010
I have Time Warner cable and they told me that their high speed internet cable service comes with 2 IP addresses. Well, I have 4 computers. Now it was my understanding that only the router needed an IP address and the computers on the network access the internet via the router, i.e. 2 IP addresses should be more than enough. I have been trying to configure my time capsule to work with all of my computers with no success. Only 2 can access the internet. I Have a mac mini, 2 mac book pros and a pc.
View 2 Replies
View Related
Apr 27, 2012
I'm just wondering if an applescript could be able to create setup and start a private network.
Info:
mac mini, Mac OS X (10.6.4)
View 8 Replies
View Related
Mar 5, 2009
To date I've used an airport express as a wireless router for my macbook and macbook pro. Both have been manually backed up routinely on external hard drives. I use the macbook as my main media center/media storage and the hard drive is starting is nearly full. I'd like to set up a system where I move my media to an external hard drive and also automate the backup of the mb, mbp, and external hard drive. Would time capsule be the best approach for this and will it backup an external hard drive tied to its usb port. Alternatively, could I tie 2 external hard drives through a usb hub into airport extreme, using one for backing up the laptops and the other external drive?
View 5 Replies
View Related
Aug 17, 2009
im off to college in 2 weeks and would like to set up a wireless network in my residence room with my airport express. Its a small room, but i would still like to be able to move from my desk to bed or whatever without wires, and also i would like to be able to hide my printer somewhere. Heres the catch. My residence doesn't allow wireless networks for some reason. I know i can make my network hidden. But will that be enough to keep them from finding out? I imagine every now and then they might just scan for networks to see whats out there. But if mines hidden, i shouldnt have a problem, correct? Just want to make sure. Not sure what the consequences are, but im sure they would just ask to shut it down.
View 21 Replies
View Related
Mar 17, 2012
Can I set up a home network between my mac and a windows based laptop?
Info:
iMac, Mac OS X (10.7.2)
View 1 Replies
View Related
Apr 16, 2012
Would like to set up old computer to airport extreme wireless network. Purchased a usb adapter.
View 10 Replies
View Related
