Intel Mac :: Getting -61 Error When Trying To Create An Image
Feb 18, 2012
I am trying to create a new image .. and my hard drive is not listed on the left hand panel .. the other night it worked fine except it would keep locking up so i did a disc repair and then restarted when i did a restart to prepare for a fresh install i noticed my hard drive was no longer in the disc utlitity not sure why that is.. Now the Snow leopard disc is stuck in the drive and I am unable to eject the disc tried almost every ejection command there is nothing .. isnt there a way to mount the hard drive through the terminal?
View 13 Replies
ADVERTISEMENT
Jun 7, 2012
Two days ago my computer died and I haven't been able to get past the Apple screen since. I've tried starting in Safe mode, etc. that did not work. I just started up using my installation disk and got into Disk Utility. It says it cannot repair the disk and that I should back up as many files as possible and reformat the disk. How am I supposed to back up if I can't start up? I am currently creating a new image of the HD to an external drive but my question is if Disk Utility couldn't repair the disk, with the external drive copy also be problematic? How can I tell before I reformat the whole thing and start over?
Info:
iMac (24-inch Mid 2007), Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 25, 2014
error: Unable to create disk image resources busy. How do I fix this?
View 5 Replies
View Related
Feb 1, 2012
I want to create a disk image of a Mac drive (.dmg file).I figured that it might not be a good idea to try and image a live disk, so I unmounted it (the user dragged the disk icon to the eject icon), and I confirmed it was unmounted by looking at /Volumes. To be clear here, this isn't the boot volume, that is /dev/disk0./dev/disk1 is an internal drive - as it happens it's the original drive for this OSX 10.4 G5, AND /Volumes/HITACHI is the mount point for an external USB drive.I have tried this twice.On both occassions, things seemed to go well, but after a few minutes (about 10 - 20 minutes), I observed that the target file on /Volumes/HITACHI stopped growing, then a bunch of unpleasant stuff started to happen:
* I did lsof /Volumes/HITACHI/MacHD_20120201.dmg and found the PID of the diskimage binary, ps waux showed it was doing nothing (CPU% was 0.0). This indicates a stuck process to me.
* The hdutil command stopped producing '.'
* I could not cancel the hduitl command
* I could not rm the MacHD_20120201.dmg file
* I could not ls the /Volumes/HITACHI directory
* unlink also hung
A little further into this, the Mac became unresponsive. I observed that the disk was now mounted again (grrr!). As a work around I switched the USB drive off and on, and Mac came good - all my terminals started to respond, the GUI responded for the user.My workaround has been to use CCC to make a clone of the disk - but I don't like this because I think .dmg files are much more convenient (for a start, now that I've used CCC I can't use the USB drive for anything else).
* Is my methodology wrong? Do I really need to umount the /dev/disk1
* Can you disable finder from automounting an internal hard drive (I am particularly interested in this)
Info:
Mac Pro, Mac OS X (10.4.11)
View 3 Replies
View Related
May 22, 2012
I’ve used Disk Utilities awesome capabilities many times, but am now running into my first real problem. I am trying to create a 100 GB new blank disk image, using the “Mac OS Extended (Journaled) option for format, 256-bit AES encryption, a single partition-Apple Partition Map, and Image Format as read/write disk image. When I implement this, it asks for the AES password then repeatedly crashes, albeit in slightly different ways each time. The most informative was a Unable to create “filename.dmg” (error -60008) message. I can’t find anything explanatory about this in Google I’m wondering if this has something to do with my upgrade to Lion (OS 10.7.4) yesterday from Snow Leopard. This error occurs on both my home and work iMacs. It seems to reliably occur about 1/2 way through typing in my password. The error occurs whether I use 128 or 256 AES encryption. There is more than adequate space on the hard drive I am attempting to place this image on. Disk Utility is version 12.1.1 (353) and all is running on a 2.66 GHz Intel Core i5 iMac.
Info:
Mac OS X (10.6.7)
View 2 Replies
View Related
Jun 7, 2012
Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end. TM sees it and it is mounted but cannot go any further
Info:
Mac OS X (10.5.8)
View 10 Replies
View Related
Sep 28, 2008
I made an image of my Windows XP laptop drive using Macrium. I can see the image file there on one of my Mac Pro's internal drives, but Im not able to select in Fusion.. Is there a way to make a Fusion VM from this image? If not, how do I go about creating a VM from my laptops's HD? I'm using Fusion 2.6.
View 9 Replies
View Related
Jan 9, 2011
I am getting a new mac.. ( being replaced)
and i want to make an image so i can restore from that image when i get my new mac..
can u tell me how i can make the image?
View 5 Replies
View Related
Sep 8, 2014
Tried this several times via disk utility.
Any image created can simply be opened without me being asked for any password!!
how to successfully create a new encrypted disk image.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9), 2.6Ghz I7 - 1Tb Hdd 16Gb late 2013
View 1 Replies
View Related
Feb 12, 2010
I made an image of my Windows XP laptop drive using Macrium. I can see the image file there on one of my Mac Pro's internal drives, but Im not able to select in Fusion.. Is there a way to make a Fusion VM from this image? If not, how do I go about creating a VM from my laptops's HD? I'm using Fusion 2.6.
View 5 Replies
View Related
Feb 12, 2010
I created a password protected folder in Snow Leopard. I created a new blank disk image with 128-bit encryption. Now I can mount the image, enter my password and: Access to secret files!
Question: I selected the disk image and deleted it. A password was not necessary...is this true? Can anyone just delete the disk image without entering a password?
View 5 Replies
View Related
Apr 14, 2012
Does anyone know if it is possible to create a disk image of the boot drive? I have tried / boot from DVD, then go to Disk Utility, file/ create new image from disk but the process stops imediatlly with a. cant unmount drive, b. drive is busy, c. in use how the drive is in use is not sensable, as it should be as 'just a drive' This is on a laptop with OSX 10.5.8 / 32gig hd, 2 gig ram, just in case it matters. I thought about timemachine, but the laptop sometimes requires a complete reinstall, that is a long process, install + upgrade + redo all the other programs +
Info:
G5 2x1.8 / G4 1.6, Mac OS X (10.5.8), G5 2x1.8 , G4 1.6 ghz, 2 gig, Beige G3 G4-1ghz OS9
View 3 Replies
View Related
May 17, 2012
Is it possible to create a bootable disk image of my hard drive onto an extrenal firewire hard drive?
View 1 Replies
View Related
Jun 8, 2012
I've done all of this and it won't open. I double click on it, the default program to open it is diskimagemounter and nothing happens when I double click.(Mac OS X Lion 10.7.4)
View 2 Replies
View Related
Jul 2, 2012
I'm trying to empty the trash on my iMac (running Snow Leopard) but I just get an error message: The operation can’t be completed because an unexpected error occurred (error code - 8003).
Info:
Mac OS X (10.6.8)
View 1 Replies
View Related
Nov 10, 2007
I'm trying to restore an old Hard Drive image OS.dmg to a usb hard drive that I have. I'm using the command: dd if=/Users/Shared/OS.dmg of=/dev/disk5 bs=1m. And I'm getting, dd: /dev/disk5: Resource busy. What would cause this error? I'm not sure why it's "busy". I get the exact same thing when I try to do it in Disk Utility.
View 2 Replies
View Related
Mar 21, 2009
I took the advice of people online and created a sparse image file as a way of password protecting folders on my hard drive. Worked well for a while. These days, when I try to add or delete files from that sparse image, I get error 61 code. Why can't I write/delete from that mounted image anymore?
View 4 Replies
View Related
Aug 25, 2009
A while back i started programming a little bit for fun, when i restarted my mac i got this error and i can't close or hide it, force shutdown or click OK, its really annoying i have to drag it down in the corner, here is a picture:(URL)
Looks like there is a logo of western digital hard drive, witch i dont have so i dont understand what that is.
View 2 Replies
View Related
Mar 30, 2012
I get the following message when attempting backup - the backup disk image"/volumes/data/rod Henderer's computer (5).sparsebundle" could not be accessed (error - 1)
Info:
time capsule, Mac OS X (10.7.3)
View 3 Replies
View Related
Oct 29, 2009
My files were backing up for about a day, had 75gb of 100gb done and then my power went out. It cancelled out, and then when it came back on I tried to resume it. It started to backup 25gb, which I'm assuming is just the last 25gb that it had to do. Anyway, it did that for a while then stopped, and now when I try to backup, it says: "Time Machine Error: The backup disk image could not be mounted."
How do I backup the rest of my stuff? Do I have to start over? And is there a way to make it transfer faster? I mean, there's no way to directly connect it to your computer, is there? Also, in the Time Machine settings thing, it says "Available: 839.8GB of 929.5GB. Does that mean it has 839gb of my 929gb backed up? What happened to the other 71gb? I just want my stuff to be backed up, why is this so complicated?
View 6 Replies
View Related
Jun 1, 2012
I created a bootable usb drive on a windows pc using windows 7 to install windows 8 preview and want to make a copy to install in virtualbox on my imac and burn to a dvd that will work on pc.
I've tried using disk utility to create an image and get a file ESD-USB.dmg, but virtualbox won't boot a dmg file.
I tried converting it in the terminal with:
hdiutil convert -format UDRO -o windows8.iso ESD-USB.dmg
but the resulting file was windows8.iso.dmg. I changed the name to windows8.iso, but even so, virtualbox complains it's unbootable.
I tried the terminal command:
dd if=/dev/disk4 of=windows8.iso
but virtualbox complained that it's not bootable.
I tried the terminal command:
cat /dev/disk4 > windows8.iso
but virtualbox complained that it's not bootable.
Info:
iMac, Mac OS X (10.7.4)
View 2 Replies
View Related
May 9, 2012
I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/MacBuild/../view/umenu.MacOS.mm.line 1351
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Nov 11, 2010
I recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
View 24 Replies
View Related
May 23, 2012
After updating to Lion server, I moved my Drobo over and setup Time Machine
Many users are prompeted to reuse or create a new backup.
The problem is I log in with credentials of 'USER A', and on the dialog it lists another 'USER B', userb.sparsebundle as the file to reuse.
I recently had a iMac hard drive die, and i tired to use the time machine on the server, with 'USER A' credentials, i got 4 listings and none of them were 'USER A'
I check the drobo and 'USER A''s sparsebundle is there. I have tried changeing permissions to read the sparsebudle, but the bundle is a 250k file, not a diskimage of the files even.
How do i resolve this problem of the wrong users coming up on "reuse or create new backup"?
How do i access the lost sparsebundle that i cannot log into to get the files for the user that needs them?
Info:
Mac OS X (10.7.4)
View 1 Replies
View Related
Apr 28, 2010
I have a Lacie 1TB external drive. I'm trying to create another partition on it using Disk Utility so that I can use one of the partitions for Time Machine. When I go to add another partition, or even just resize the existing one, I get an error saying drive must be HPFS+ with Journaling enabled. It is. I've seen reference to this error in searches, but have not found a solution. Is there a fix for this, or another tool that I can use to re-partition my drive without wiping out existing partition? I have about 450GB worth of data on the drive that I might be able to store somewhere else temporarily, I would just prefer not to have to go through that....
View 1 Replies
View Related
Sep 1, 2014
I have been unable to create an open directory replica from an open directory master.I have created an open directory master in Mavericks and added DNS, file sharing and users etc. I can connect, log in, all is good.I now want to create a replica on another machine for redundancy, yet I have been unable to do so. I have been able to diagnose through the terminal on each machine and get no errors except the following from the intended replica machine: Both Machines are Mac Mini servers, raided drives.
Replica has 8Gb RAM, Master has 16Gb macsvr1:~ admin$ sudo /usr/sbin/slapconfig -preflightreplica 192.168.0.11 diradmin+0000 Error; Unable to determine the master’s software version The rest of the terminal looks like this. Open Directory Master Primary address = 192.168.0.10
[Code] .......
I can verify each machine version and all DNS is fine. Both machines are in identical OS systems. 10.9.4 Server 3.1.2. Network is good as I can ping each machine from the other. ssh is enabled on both yet still i'm unable to create a replica.
View 4 Replies
View Related
Jun 19, 2012
I am receiving an error 5.5.4 "Invalid Email address error code 17099 indicating that mail could not be sent for Account name: "Msn".I have recently moved from a PC laptop and have been sent email messages to this account on my iMac successfully for several weeks. The email address in question is actively sending and receiving messages. I can receive email from that account.
Info:
iMac, Mac OS X (10.7.4)
View 1 Replies
View Related
Nov 16, 2009
I made a Winclone image of my Boot Camp partition before upgrading my hard drive, and now I've come to restore the image to a new partition I get the following error: "Invalid Image: MBR Not Found" I get the same error whether I create the partition using Boot Camp Assistant or using Winclone. Anyone had this error before or know the cause?
View 6 Replies
View Related
Jun 4, 2012
Which version of Image Capture should be in Snow Leopard Mac OS-X 10.6.8 When my wife attempts to run Image Capture 3.0.3 on her system (her Imac cannot be upgraded to Lion unfortunately) is unable to run. The error message is: You cannot use this version of the application Image Capture with this version of Mac OS-X.
Info:
iMac Duo-Core Intel, Mac OS X (10.5.6)
View 3 Replies
View Related
Aug 16, 2010
My parents are having the exact problem described in this thread (and I've been tasked with remote tech support): [URL] Upon startup, WinXP gives them a BSOD reboot loop while indicating that a DLL file is possibly corrupt. Booting in Safe Mode won't work, and reverting to an earlier snapshot merely delays the problem by 24 hours or so.
The obvious and ideal solution would be to boot into Repair mode from the install disc and copy the clean DLL to replace the damaged copy. The problem is that, according to the thread, I'll need to first get Fusion to accept a floppy image of SCSI adapter drivers for me to even be able to enter Repair mode. The link for that image was broken in the thread, but a little Googling directed me here: [URL]
View 1 Replies
View Related
