Windows On Mac :: Fusion 3.1.1 BSOD "Bad Image Checksum" Error And Reboot Loop?
Aug 16, 2010
My parents are having the exact problem described in this thread (and I've been tasked with remote tech support): [URL] Upon startup, WinXP gives them a BSOD reboot loop while indicating that a DLL file is possibly corrupt. Booting in Safe Mode won't work, and reverting to an earlier snapshot merely delays the problem by 24 hours or so.
The obvious and ideal solution would be to boot into Repair mode from the install disc and copy the clean DLL to replace the damaged copy. The problem is that, according to the thread, I'll need to first get Fusion to accept a floppy image of SCSI adapter drivers for me to even be able to enter Repair mode. The link for that image was broken in the thread, but a little Googling directed me here: [URL]
View 1 Replies
ADVERTISEMENT
Sep 28, 2008
I made an image of my Windows XP laptop drive using Macrium. I can see the image file there on one of my Mac Pro's internal drives, but Im not able to select in Fusion.. Is there a way to make a Fusion VM from this image? If not, how do I go about creating a VM from my laptops's HD? I'm using Fusion 2.6.
View 9 Replies
View Related
Sep 2, 2009
Whenever I open disk utility, I need to choose between 'calculate image checksum (CRC-32)' and ' calculate image checksum (MD-5)' before I can open disk utility. I always click on either one of them because otherwise disk utility won't open. I am wondering what it means. I called the Apple support about it, but the girl on the phone didn't see it on her computer and couldn't find any info about it.
View 2 Replies
View Related
Feb 12, 2010
I made an image of my Windows XP laptop drive using Macrium. I can see the image file there on one of my Mac Pro's internal drives, but Im not able to select in Fusion.. Is there a way to make a Fusion VM from this image? If not, how do I go about creating a VM from my laptops's HD? I'm using Fusion 2.6.
View 5 Replies
View Related
Jun 5, 2007
Has anyone else experienced anything like this with their MBP? I woke my MBP from sleep as I went to do something on it and I found a checkerboard-like (or interlacing) pattern displayed across the screen. That is, I could see bits and pieces of Firefox, the desktop, the dock, etc. in little rectangles across the screen with the bits and pieces scattered all over the place (like puzzle pieces strewn everywhere). I wasn't entirely surprised as I had seen a friend of mine have a similar problem when waking his MBP from sleep. I didn't have time to deal with a restart, so I went to my gf's Windoze machine (perhaps what follows is my MBP taking revenge for going off when times got tough and cheating on it with a *gasp* PC!!???). when I returned to my machine later on, it sounded like it was rebooting itself as I walked in the room. Then about 15-20 seconds later, it did the same thing. When I opened it up, the same checkerboard pattern appeared as it started to reboot, then it went to a completely blue screen, and finally went black (as in turned-off black). After that, it started this same process over again and stayed stuck in that loop until I held down the power button to turn it completely off. I called Apple (still under 90-day Apple Care since I got the machine in April) and did all of the troubleshooting tasks that they talked me through. It is apparently a hardware issue, as I feared, and I will have to send it off to have it repaired. (At least is sending the pre-paid box for me to ship it to them).
View 2 Replies
View Related
Jun 4, 2012
I received an iMac G5 from this old couple, they were going to throw it out, but all it needed was a power supply which I bought and replaced. It's been about 9 months and everything worked great, no problems whatsoever.
Three days ago, I shutdown the computer and when I booted the next day, it would only reach the Apple logo and the spining wheel, the fans would blast loud and then it would shut down and restart again, repeating the same thing over and over. I cannot start it under Safe Mode nor it recognizes the CD when booting.
iMac G5
1GB Ram
no Isight
View 1 Replies
View Related
Jun 10, 2012
I have a 6 month old iMac (bought Dec 2011). It has 10.6.8 with all patches. It began to randomly shut down and got stuck in the reboot loop (sometimes, the problem was a reawakening after sleep, but even a simple shutdown/restart wouldnt guarantee correct behavior).
I did the Apple Hardware Test (it reported - no troubles found), reset the SMC, PRAM - all to no avail.
Finally, i reinstalled the OS from the DVD that came along with the iMac. Left it for a few hours to download the "jumbo" patch from apple site, and now it is back to behaving the same way - it is stuck in a reboot loop! I dont know if it installed the patch or not, as soon as i touched any key to wake up the iMac, it rebooted (like before). And now I gotta try the boot process like 15 times and it may boot correctly. Safe Mode boot is also not guaranteed to work. It shows the sliding bar and then back to reboot!
If it were a software issue, the reinstall of the OS should have fixed that? If it were a hardware issue, the AHT should have caught that? Am I stuck with a lemon? Just one of those bad pieces that are inevitable in any assembly line production?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Aug 13, 2009
I got a 1 TB Western Digital external last night and had left it on all night so that Time Machine could back me up a few times. Then this morning, I had disconnected the drive and decided that I ought to update to 10.5.8 because Software update had told me to the day before. So I did, and I walked out of the room after it started installing the update. Then I walked back in when I first heard the startup chime and the fans were running at 6000 rpm and the screen showed the Apple and the daisy wheel. It proceeded to turn itself off, and repeat the process, always getting stuck at the Apple logo screen. So I tried booting it up in safe mode, but nothing changed; it never got past the apple screen. Then I booted from the install disc and used disk utility to verify the disk and repair the disk permissions. I tried starting it up a couple of times after that and nothing had changed. So I booted from the install disc again and was going to reinstall Leopard, but I decided to restore from one of the pre-10.5.8 Time Machine Backups.
View 3 Replies
View Related
Oct 14, 2009
I installed Snow Leopard about a month ago. Ever since I installed it the Dictionary.app program doesn't work anymore. It tries to start up and then shut down and sends a report to apple (which they obviously don't do anything with it). So, I tried to reinstall the dictionary using Pasifist. After it unpacks the dictionary.app package it gives me two checksum errors. 1. Checksum for file
View 6 Replies
View Related
Dec 29, 2007
I just got a new Mac Book for Christmas and so far I love it. I have a Windows only program I use so after some research bought and installed VMWare Fusion. The problem is when I tried loading Windows XP Professional SP2, I get a message saying: Fatal error 'ASMS' file missing. Any ideas as to how I can remedy this??? Please keep in mind that I am pretty computer stupid.
View 10 Replies
View Related
Dec 22, 2010
Naturally I had to restart my mac a few times, and nothing seemed out of the ordinary; everything performed as expected. Even played some counterstrike in windows before I rebooted back into osx.
A few hours later I tried booting back into windows, and it says there was an error and gives me the usual boot options (safe, last known working config etc etc). After I select one it begins to work, but after 5-10 seconds I get a bluescreen that lasts for a split second before rebooting. /repeat.
View 4 Replies
View Related
Feb 23, 2009
I have recently bought a new macbook pro early 2008 and have installed bootcamp on it to play games.
I have noticed that with the stock nvidia drivers that came with the bootcamp cd, I was able to set my screen brightness at a pre-determined level once and for all without adjustment.
However, with that stock drivers, I have gotten a few BSOD while playing DotA, so I have updated my drivers to the latest nvidia beta laptop drivers, that made the brightness issue pop up.
Now whenever I switch on my mbp, I would have to go and set the brightness of my screen to my desired level EVERY SINGLE TIME, if not it would be turned back to maximum contrast every time I opened a single window. Now this pisses me off a lot as I game a lot.
Any of you guys have the solution to my problem?
I would greatly appreciate all of your inputs!
View 4 Replies
View Related
Jul 27, 2010
I have a copy of Windows 7 for my mac and when I installed it it forced shut downed immediately! I boot it up by pressing option and chose the windows partition and it is a black screen with a flashing underscore that blinks once, then rapidly blinks until It shuts it off. I have read every fourm and they say nothing about booting up problems.
View 2 Replies
View Related
Aug 19, 2010
I have a 13" 2.4GHz mid-2010 MBP, with a legit version of Windows 7 installed. Sometimes I virtualize using VMWare, but usually I boot right into it when I use it to play games.
It's all been going well, until I would sometimes just shut the lid while I'm on Windows 7 bootcamp. When I open the lid, the computer is shut down, and I have the option of booting into OS X or Windows. If I choose Windows, it's as if it went to sleep (which should be happening as I'm closing the lid instead of shutting down).
View 3 Replies
View Related
Oct 2, 2009
So I had a Macbook with Windows 7 partition (RTM from MSDNAA since I need it for Visual Studio 2008) and I created a backup with Winclone. I got a new MBP 13" and so tried to install the partition from Winclone.. It says that it was restored successfully but when I start up my computer I get BSOD and my computer keeps restarting. (Think its due to hardware change?) I cannot even repair it with the windows 7 cd.
View 5 Replies
View Related
May 24, 2008
iTunes froze up yesterday while I was running vmware fusion (on my bootcamp partition) and now when I try to start vmware I get the following error:
Cannot open the disk '/Users/neil/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on.%
View 6 Replies
View Related
Jul 13, 2009
When I boot Fusion with MacAffee I get a message that there is an updated version of Fusion is ready for download. When I go to the site I'm offered a choice of just Fusion or Fusion with MacAffee. Since the boot message only talks about Fusion should I do the only Fusion download. Or should I get the combined one?
View 1 Replies
View Related
May 17, 2012
I use VM Ware Fusion on my Mac Book Pro.When I start up an image with Windows 7 or Windows Server 2008R2, my cpu gets very hot.Temperature can go up to 90 degrees celsius for a brief moment, but usually i stays stable around 60 degrees celsius. I also use smFanControl, to make sure my fans are cooling a bit harder when I use VM Ware Fusion.
I have the next questions: Is the temparature rise normal?Can it harm my laptop (cpu)?Can smFancontrol damage my fans, while running harder for about 8 hours like that?Or is ther something wrong with my Mac, because during temerature rise to for instance 90 degrees, the cpu is used for like 30-40 percent?
Info:
MacBook Pro, Mac OS X (10.7.4), Harddisc has now tree partitions
View 9 Replies
View Related
May 10, 2009
i am gonna install VM fusion on my macbook air and the problem is that i left my window xp cd installation at my friends house. Can i install iso image or something like that so that i can ask him to convert it and then send to me via internet so that i can use the image file to install VM fusion. Btw, he and i, not sure how to convert it. anyone knows?
View 2 Replies
View Related
Nov 16, 2009
I made a Winclone image of my Boot Camp partition before upgrading my hard drive, and now I've come to restore the image to a new partition I get the following error: "Invalid Image: MBR Not Found" I get the same error whether I create the partition using Boot Camp Assistant or using Winclone. Anyone had this error before or know the cause?
View 6 Replies
View Related
Aug 8, 2006
i am gonna install VM fusion on my macbook air and the problem is that i left my window xp cd installation at my friends house. Can i install iso image or something like that so that i can ask him to convert it and then send to me via internet so that i can use the image file to install VM fusion. Btw, he and i, not sure how to convert it.
View 14 Replies
View Related
Oct 24, 2009
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
View 8 Replies
View Related
Nov 12, 2009
I Have my 15" macbook pro 2,4 Ghz 2G in RAM, with Snow Leopard, bootcamp and vista running for some time (about a year or so) and every thing has been going ok. Last night I made a clean windows 7 installation. All went good, installation, let windows 7 make his updates, I put Snow Leopard disk to make macbook pro drivers updates and I installed all the program I need including Norton 2010 Antivirus.
All went smooth and easy untill I activated Windows 7 with Daz Windows Loader 1.6.9. After a few seconds It said : Everything Ok, Windows is now activated and your machine will reboot now. After that, it gets out of the desktop to the closing window and suddenly I get the blue death screen. I have to manually press de power button to shut down my macbook pro.
I reboot again and after getting the safe mode screen stuff i just keep with Start Windows normally. It starts well again, but now each time I want to reboot or shut down my MBP I get again and again the blue death screen. And I�m sure i will get it while working soon.Is it probably because I did all kind of updates before running the Daz Loader (including programs and antivirus software)??
View 1 Replies
View Related
May 7, 2009
I'm having pretty bad difficulties with Windows 7 and Parallels Desktop. I know it's not supported yet, but some folk have it working. I can boot up, but I can't install Parallels Tools. I changed the Configuration to "Windows 2008 Server" like someone suggested in another forum, but fails to boot up.
Seems like VMWare are offering a better helping hand than Parallels Desktop - and while it is not supported yet by them, they say that if you use Windows 2008 Server Config everything works apart from sound.
So am I best giving it a bash with VMWare's Fusion? 30-day trial for free. But I'd rather try get Parallels working since I paid for it.
View 9 Replies
View Related
Nov 28, 2009
i just installed windows 7 on my mac last night over my vista partition, but now my avg firewall was disabled to i had to reinstall avg, got that fixed, but my next problem is vmware fusion. it just doesnt work, it boots into windows 7 but then i get the blue error screen saying something like windows has shutdown due to a blah blah blah...anyway i need this fixed right away, do u guys know how to fix it or know any alternatives besides parallels?
View 2 Replies
View Related
Jul 9, 2009
Before you ask, I had found some old games a few months ago that I wanted to play for nostalgia sake, so I made some Windows 95 and 98 virtual machines. It was pretty easy actually, since I just used Disk Utility to create images of the install discs. VMWare had a nice guide on their site that helped me get networking setup properly also.
But then I got to thinking, it'd be pretty fun to try and get Windows 3.1 up and running as well. I was able to make images of some MS-DOS 6.22 install disks and got that installed just fine. My problem actually comes when trying to install Windows itself. I was able to get the install files from 2 different sources. The first was just a folder of ALL the install files from 6 different disks, and the second was 7 different ZIP files from 7 different disks. I tried creating a single image from the first source, and 7 different images from the 7 unzipped folders from the second source, but on both attempts I'm unable to access the A: drive in DOS to start the setup. It gives me an error message about reading from the drive, followed by the standard "Abort, Retry, Fail?"
Has anybody else tried to get a Windows 3.1 virtual machine up and running and come across this problem? I even tried Googling for the exact lists of files contained on the 6 disks from my first source in order to try and split those up and make the necessary images, but unsuccessfully.
View 23 Replies
View Related
Jul 20, 2009
Is it possible or do I have to install windows 7 through bootcamp for the xp virtualization to work?
View 6 Replies
View Related
Oct 4, 2009
I don't know what happened, but since I did the update from a couple days ago, my Windows 7 no longer boots. I really don't want to rebuild my 7 image since it's pretty setup. I do have previous Time Machine copies, but I wanted to visit here for some possible solutions before I go thru it the hard way.
View 5 Replies
View Related
Sep 26, 2010
Everytime I need to reboot windows 7 running on boot camp, it will disable the option key so i am FORCED to boot into OSX. Only after a reboot from OSX or holding the power button will it let me use the option key again.
View 6 Replies
View Related
Feb 18, 2012
I am trying to create a new image .. and my hard drive is not listed on the left hand panel .. the other night it worked fine except it would keep locking up so i did a disc repair and then restarted when i did a restart to prepare for a fresh install i noticed my hard drive was no longer in the disc utlitity not sure why that is.. Now the Snow leopard disc is stuck in the drive and I am unable to eject the disc tried almost every ejection command there is nothing .. isnt there a way to mount the hard drive through the terminal?
View 13 Replies
View Related
