Intel Mac :: Disk Utility Can't Repair HD - Possible To Create New Image To Backup?
Jun 7, 2012
Two days ago my computer died and I haven't been able to get past the Apple screen since. I've tried starting in Safe mode, etc. that did not work. I just started up using my installation disk and got into Disk Utility. It says it cannot repair the disk and that I should back up as many files as possible and reformat the disk. How am I supposed to back up if I can't start up? I am currently creating a new image of the HD to an external drive but my question is if Disk Utility couldn't repair the disk, with the external drive copy also be problematic? How can I tell before I reformat the whole thing and start over?
Info:
iMac (24-inch Mid 2007), Mac OS X (10.7.4)
View 1 Replies
ADVERTISEMENT
Apr 1, 2012
I'm experiencing some problems with my iMac right now, and I'm not sure how they started or what to do to correct them.
1) Computer seems to hang up from time to time while starting applications, or in the middle of some tasks. There's no rhyme or reason or any patterns.
Question: Is there anything I should try to clean up the computer?
2) About a week ago I started using Time Machine to do scheduled backups rather than me manually starting my own backups. Now whenever time machine does a back up, it seems to stop working somewhere in the "Preparing to Backup" stage, and I end up needing to restart the computer manually because the whole system becomes useless. It will no longer complete any backups, even when I start manually.
Question: Why would time machine now all of the sudden start freezing in the middle of the prep to backup stage?
3) I just tried to use my disk utility to check and see if I need to repair the disk and here is what reported back:
Info:
20" iMac, Mac OS X (10.5.8), 2.4 GHz Intel Core 2 Duo
View 7 Replies
View Related
Apr 19, 2012
I try to insert my hard drive and it says "the disk inserted is not readeable by this computer" but when I open disk utility to repair it says "First Aid failed, Error: filesystem verify or repair failed". I am very frustrated, my work is due next week and most of it is in the drive.
Info:
iMac
View 1 Replies
View Related
Mar 10, 2012
While trying to pepair permissions systom freeze up. So I put in the startup disk hit restrat holding down c and tried to repair permissions that way and it froze up that way too. I had to manually turn off machine.
Info:iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Jun 25, 2014
error: Unable to create disk image resources busy. How do I fix this?
View 5 Replies
View Related
Nov 25, 2009
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
View 8 Replies
View Related
Apr 24, 2012
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
View 3 Replies
View Related
Jan 2, 2010
Running Diks Util on my iMac 10.6.2. i am given this warning.
=========
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
View 1 Replies
View Related
Feb 28, 2009
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
View 5 Replies
View Related
Aug 3, 2010
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies
View Related
May 14, 2012
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
View 6 Replies
View Related
Jun 12, 2012
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Sep 12, 2014
Macbook Pro running on OSX Mavericks is having problems.
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Jun 27, 2014
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
View 1 Replies
View Related
Feb 22, 2010
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies
View Related
Apr 6, 2012
I have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
View 2 Replies
View Related
Apr 25, 2012
Fortunately I got a time machine backup. And its restoring the drive while in Lion recovery mode. Here's what happened... I dont have a router a my place at the moment and so my two phones (iphone 4 and htc android) connect to my internet using my MBP's wifi via internet sharig. For some reason they were not able to get an IP from the mbp. After doing some wifi swtich toggles and forgettig & rejoining the network, i decided to reboot all my devices. I shut down my modem, phones and restarted my mbp. On reboot, after the chime, it showed an unsusal 'progress bar' under the apple logo. The bar progressed to about 10% and then the mbp just powered off. This happened several times even after PRAM and SMC reset.
So now i booted with cmd+r pressed and in recovery mode ran a 'verify disk'. It said the verification stopped and that i should repair the disk. When i tried to do that it said the disk cannot be repaird and that i should back up as many files as possible and attempt to format the disk and restore it with time machine. It is precisely what im doing at the moment.
1. Mbp wont sleep even when internet sharing is off
2. Mbp wont lit the onboard display upon opening it in clamshell mode until i removed the 3.5mm audio cable of my speakers from the audio out port!
Info:
MacBook Pro, Mac OS X (10.7.3), Mid 2010
View 5 Replies
View Related
Jun 7, 2012
Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end. TM sees it and it is mounted but cannot go any further
Info:
Mac OS X (10.5.8)
View 10 Replies
View Related
Jun 8, 2012
please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
View 2 Replies
View Related
Dec 1, 2014
how do I repair disk using disk utility
Info:
MacBook Air, OS X Yosemite (10.10.1)
View 1 Replies
View Related
Mar 12, 2012
I just saw that the amount of memory left on my HD just dropped around 60GB, so I used the "Verify Disk" option on Disk Utility, and the output was: Verifying volume “Macintosh HD”Performing live verification.Checking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog file.Checking multi-linked files.Checking catalog hierarchy.Checking extended attributes file.Checking volume bitmap.Checking volume information.Volume header needs minor repairThe volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired. Start up your computer with another disk(such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
I don't have the disk right now, so is there some other way I can repair it, get another install disk, or anything else? I've been thinking of booting up with a Linux livecd, but can it access the HFS+ filesystem?
Info:
MacBook, Mac OS X (10.6.8)
View 2 Replies
View Related
May 28, 2012
I have two drives. The main internal drive is giving me this message after I tried to repair it.The external drive that TM backs up to says the volume appears to be ok..What do I need to do to restore my system and not lose all my pics, home movies ect.Read a lot of posts, but I must admit they were a little advanced for my knowledge.
Info:
Mac mini (Late 2009), Mac OS X (10.7.4)
View 6 Replies
View Related
Oct 31, 2010
I ran a fix permissions today, and got the following errors. I have no idea what they mean, and am a bit concerned. Anybody have any idea what this stuff means?...
View 4 Replies
View Related
Feb 23, 2009
Doing some disk utility stuff turned this up but I cannot select repair disk.
Verifying volume "Macintosh HD"
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
nded Attributes file.",0)
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Invalid volume free block count
(It should be 12041024 instead of 12041020)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
View 3 Replies
View Related
Nov 5, 2009
I have a 500 GB Maxtor OneTouch 4 USB desktop drive that I use for archival stuff, formatted into a 400 GiB HFS+ and a 64 GB FAT partition. Except when I was upgrading my HD and upgrading to Snow Leopard, I used it as a temporary Time Machine drive in case of drive failure during the transfer process.
All of a sudden, I get this message:
"Mac OS X can't repair the disk "Maxtor 400 GB."
You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
The FAT partition appears to be fine.
So my questions are- what may have caused this, and how stable can I expect the drive to be in the near future?
I've already started transferring data off the drive, but I was really hoping to wait until Black Friday to get a new drive. Will information on the damaged partition be "safe" for the time being?
Equally interesting to me is what could have caused this. I haven't run Time Machine backups to the drive for at least a week, and have done no other major file operations besides reading movie files. The drive isn't making any sounds that would indicate drive failure, and it seems to read just fine- was this just the result of a random software glitch that corrupted the data structure somehow? Interestingly, I was checking the size of various folders, and I noticed that the Backups.backupdb folder, which should be around 65 GB last I checked, reported as taking up over 230 GB of space (when I started the backups a few weeks ago, there was only 80 GB of space to begin with.)
View 3 Replies
View Related
Feb 2, 2009
Yesterday I decided to Install Windows Xp on my Mac. I tried to partition it but BootCamp said, "Verifying failed. BootCamp can't partition disk." So I started reading about this problem on the Internet and I found out that I have to use the Mac OS X Installation Disk and use the Disk Utility to "Repair" the disk. I started Disk Utility and clicked "Repair". Many files were missing so it tried to repair it. So now when I start the Apple-logo and the loading-circle is "frozen", so it just loads and loads and loads and loads, and nothing happens. I decided to format the disk from Disk Utility but I can't format it! I can't do nothing! So now I cant start my Mac! If it is possible to take a backup or something before I format it, or keep the files it would be lovely!
View 1 Replies
View Related
Dec 11, 2009
I have a MacBook with 3 partitions. One has Snow Leopard (Macintosh HD), Tiger and Windows 7On Snow Leopard I tried to backup files to my external Hard Drive but some files wouldn't transfer. When I clicked on the folder that was unable to transfer, everything went out of control. All windows started opening themselves and I had to shut down my MacBook by the power button.
View 4 Replies
View Related
May 19, 2010
I had difficulties booting from my 10.5.8 partition. So I booted from the installation disk started disk utility and repair disk permission. I got results that said: warning, will not be repaired. What should I do? Install one of the latest back ups, or what?
Information:
G4_400 AGP / CPU upgrade @1.1Ghz - PowerBook G4 - IMac with Intel 20"
Mac OS X (10.4.11)
10.5.8 on Partition
View 11 Replies
View Related
Jun 30, 2010
I've done repairs 3 times but after a few days I'll run Disk Utility again and it says the same thing again.
Is this a sign of a fault, future issues or is it just something she's doing?
View 2 Replies
View Related
Aug 10, 2010
Last night I noticed that the time machine icon on the menu bar had a stop sign or something and when i clicked back up now it says it can not back up. I verified the volume and recommends a repair but it says it can not repair.
View 2 Replies
View Related
