I get the following message when attempting backup - the backup disk image"/volumes/data/rod Henderer's computer (5).sparsebundle" could not be accessed (error - 1)
Info:
time capsule, Mac OS X (10.7.3)
The following error message just popped up: "The backup disk image “/Volumes/Data/Robert's Office iMac (2).sparsebundle” could not be accessed (error -1)." I'm running a late 2009 iMac; upgraded to Lion about a week ago. It seems to have done the Time Machine backups fine for the last week.The only other recent change was to reset my iCloud account so I could sync with my iPhone.
Info:
iMac, Mac OS X (10.5.5)
Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end. TM sees it and it is mounted but cannot go any further
Info:
Mac OS X (10.5.8)
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
for the past month or so my automated backups with time machine/time capsule have not been working. Every so often the following error message pops up:
"the backup disk image could not be mounted"
in troubleshooting, i have tried to mount the sparsebundle image directly but without success. from reading around a bit i can see that others have had this problem, and that one solution is to delete the sparsebundles and start again.
but that of course means losing all my archived backups, which i would rather avoid.
I want to use Time Machine, but I don't want to have all my data sitting in the open on an external drive that someone can just carry away. Can I make an encrypted disk image, and have Time Machine use that as the backup volume?
View 2 Replies View RelatedSo my current backup strategy uses two western digital external hard drives. The first I have permanently connected to my iMac using Time Machine. On the second I use CCC to backup to every week and keep it in the trunk of my car as an offsite backup.
Just had a couple of questions to make sure I'm prepared for the worse...
- What temperatures can hard drives survive at? Is there a risk of it overheating in my car?
- I've read about some issues with CCC's backups. I'm currently backing up to an encrypted disk image - is there any way to verify the backup? If I just cloned the drive instead so it was bootable is there any way to encrypt it? And is Super Duper more reliable?
Can I make a disk image of my macbook pro for backup? I'm using Lion, have 8 g memory and 500 HDD.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
Recently I haven't been able to backup. Why this is? Not too sure. I don't remember changing any settings or anything recently but within the last 2 weeks or so I haven't been able to backup at all. When I start backing up it says "preparing backup" then an error message pops up that says "The backup disk image could not be mounted".
View 24 Replies View RelatedI'm just curious as to what everyone's backup strategy for Windows is? I've been exploring the options of the Windows XP Backup utility, but I also like being able to have a entire disk image with Winclone. However there's no way to back up incrementally with Winclone. I'm sort of mum on both options, or would like to know if there's a better option? So what have the other Boot Camp participants been doing for a Windows backup?
View 7 Replies View RelatedI use Carbon Copy Cleaner to backup. I've set it to backup to a sparse, rewritable disk image. If I, say, delete a file, then do another backup, will the file I deleted still be in the folder it was in, or will it disappear as if the backup was cleared and redone?
View 2 Replies View RelatedTwo days ago my computer died and I haven't been able to get past the Apple screen since. I've tried starting in Safe mode, etc. that did not work. I just started up using my installation disk and got into Disk Utility. It says it cannot repair the disk and that I should back up as many files as possible and reformat the disk. How am I supposed to back up if I can't start up? I am currently creating a new image of the HD to an external drive but my question is if Disk Utility couldn't repair the disk, with the external drive copy also be problematic? How can I tell before I reformat the whole thing and start over?
Info:
iMac (24-inch Mid 2007), Mac OS X (10.7.4)
My files were backing up for about a day, had 75gb of 100gb done and then my power went out. It cancelled out, and then when it came back on I tried to resume it. It started to backup 25gb, which I'm assuming is just the last 25gb that it had to do. Anyway, it did that for a while then stopped, and now when I try to backup, it says: "Time Machine Error: The backup disk image could not be mounted."
How do I backup the rest of my stuff? Do I have to start over? And is there a way to make it transfer faster? I mean, there's no way to directly connect it to your computer, is there? Also, in the Time Machine settings thing, it says "Available: 839.8GB of 929.5GB. Does that mean it has 839gb of my 929gb backed up? What happened to the other 71gb? I just want my stuff to be backed up, why is this so complicated?
I've setup my macbook air with an XP partition also. Is there a way of getting a backup image of the whole setup?
View 3 Replies View RelatedThis backup is too large for the backup disk. The backup requires 344.98 GB but only 216.11 GB are available.
Info:
iphone4, iOS 4, imac 24
Time Machine will not back up, with following error message.
Starting standard backup
Backing up to: /Volumes/My Book/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Node requires deep traversal:/ reason:must scan subdirs|new event db|
Error: Flushing index to disk returned an error: 0
Backup canceled.
iMac running 10.6.8
2.66 GHz Intel Core 2 Duo
Info:
iMac9,1, Mac OS X (10.6.5)
I had, way back on 10.0.0.4 a copy of a little program that did nothing but flash an indicator on the upper left corner of the menu bar when the disk was being accessed, great for iBook use.
View 7 Replies View RelatedDoes anyone know if it is possible to create a disk image of the boot drive? I have tried / boot from DVD, then go to Disk Utility, file/ create new image from disk but the process stops imediatlly with a. cant unmount drive, b. drive is busy, c. in use how the drive is in use is not sensable, as it should be as 'just a drive' This is on a laptop with OSX 10.5.8 / 32gig hd, 2 gig ram, just in case it matters. I thought about timemachine, but the laptop sometimes requires a complete reinstall, that is a long process, install + upgrade + redo all the other programs +
Info:
G5 2x1.8 / G4 1.6, Mac OS X (10.5.8), G5 2x1.8 , G4 1.6 ghz, 2 gig, Beige G3 G4-1ghz OS9
The disk image icon from my installation of Adobe Flash has randomly disappeared from my desktop. I may have accidently ejected it, but don't think I did. It is now not showing up under my "Devices" list either.
If I have accidently ejected it, does this mean the software is uninstalled?
Info:
MBP, Mac OS X (10.6.4)
I tried to upgrade the snow leopard from 10.6.0 to 10.6.8 for the good last weekend. I downloaded the upgrade file form apple. But always after downloading it says can not verify the file as the disk image is corrupted.
View 2 Replies View RelatedI've done all of this and it won't open. I double click on it, the default program to open it is diskimagemounter and nothing happens when I double click.(Mac OS X Lion 10.7.4)
View 2 Replies View RelatedAfter a fatal mac crash (PPC 10.5) i had no option but to reinstall the OS (10.5), i obviously didnt reformat the drive in the hope that i would be able to recover some if not all of my data. Using various tools i was happily able to recover most of my data successfully, including 3 AES encrypted Disk images of around 30GB in size each.
I didn't hold out much hope for actually recovering the data inside the dmgs, although after some fiddling i was able to recover 2 of them fully after receiving the no mountable file system error, i dont know how i done it but nonetheless i dont appear to have lost any data from those two dmgs whatsoever. Now the third dmg (also about 30GB in size) never gave me the no mountable file system error and instead returns the error: unable to mount: not recognized. Im pretty sure that my data is still there somewhere due to the sheer size of the recovered file, tied with the fact of the success of the recovery of the other 2 disk images. I have read every post i could find on this site and have trawled the web tirelessly looking for a solution to this, but have yet to find anything that even comes close - the closest i have found was a post on this forum where it would appear an apple engineer was able to recover most of the data using some sort of magic.
I am not in a position to pay for professional data recovery and besides i would love to see a solution to this problem appear somewhere on the web. I have tried the usual, rebuilding permissions, mounting on another machine (imac G5), resizing with disk util, repairing with disk warrior, converting to ISO - all which return the same error - not recognized! I have tried every terminal command i have found on the web, although decyphering some of the information is a little out of my remit and my knowledge of HEX is limited. I haven't yet tried Toast, basically because i dont have a copy, but it would be my guess that this would return a similar result. Incidentally when i recovered the original data, there were some small (what appeared to be dmgs) files around only maybe a few Kb each with part of the file names of the original files, i'm guessing these maybe the headers or something like that? although i didn't have to do anything with them to get the other 2 disk images working again.
Info:
iMac, Mac OS X (10.5), Disk Image error
When I mount downloaded disk images, they open in a new window automatically.
Info:MacBook, Mac OS X (10.6.8)
Apparently, there are two ways to convert disk images in CDR format to ISO format:
1. Rename diskimage.cdr to diskimage.iso
Or
2. hdiutil makehybrid -iso -joliet -o diskimage.iso diskimage.cdr
The first method is really quick while the second method takes quite a long time. Do the two methods yield the same ISO file? In particular, I would like to convert a bootable CDR disk image to an ISO disk image.
error msg: Unable to complete backup. An error occurred while creating the backup directory. - What can I do to fix this? I tried restarting.
Info:
Time Machine, Mac OS X (10.5.8)
Which version of Image Capture should be in Snow Leopard Mac OS-X 10.6.8 When my wife attempts to run Image Capture 3.0.3 on her system (her Imac cannot be upgraded to Lion unfortunately) is unable to run. The error message is: You cannot use this version of the application Image Capture with this version of Mac OS-X.
Info:
iMac Duo-Core Intel, Mac OS X (10.5.6)
I have Time Machine backing up my MacMini Snow Leopard Server to an external harddrive. When the backup runs, it never completes, but it also does not throw an error message. It just gets stuck around 300MB or so and eventually starts over. As you can see it does not seem to backup everything. I have tried using TimeTracker to see what it might be getting stuck on but I can't really make heads or tails of it. I have even removed the old backup and started a new one. It backs up once fully (I think) and then after that it just gets stuck like this.
I should mention the drive it backs up is two separate partitions SnowLeopard Server Volume and PrimeRoot Volume, both of which need to be backuped. I was thinking maybe a permissions issue? But I just don't know where to look.
Info:
Mac mini, Mac OS X (10.6.8)
I have created a dmg of the disk (compressed/no encryption) using Disk Utility and have tried to burn to a DL DVD without success. I've searched this forum but was unable to find the correct procedure.
View 5 Replies View RelatedI had some bad experiences in the past with my first MacBook Air (version 2.1) in which external drives kept getting erased without any good reason. I think it's due to the fact that I had to connect a USB cord to another computer when I had an external drive plugged into the MBA because the MBA could not power it on its own.
I thought it was due to a bad external drive and I took it to Samsung service center and complained that their drive was malfunctioning. I got a refund. But later on, I found that the same thing happened to another external drive and to a USB flash drive, so I realized that it had nothing to do with the external disks and something to do with the computer. I used the same drives that got erased on a newer MacBook Air (version 3.2) and I never had the sudden erasure problem.
Anyhow that's the background to why I want to make a clone of the external disks in my possession. If for some reason, the external disk gets suddenly erased, I would like a copy somewhere in safekeeping so that I do not lose all my movies.
How do I make a clone of an external disk?
I will be using a MacBook Air (3.2) for this task. It has two USB ports. Can I use Carbon Copy Cloner to do this? Just choose a source disk (external disk I want to clone) and a destination disk (the external disk where I want it to be cloned to)?
Info:
MBA v 3.2, 256GB SSD, 2.13GHz, 4GB, Other OS, 10.6.8
I wish to run Snow Leopard and Lion on 1 Hard Drive. I need to back up snow leopard and then install Lion.how to do this?
Info:
MacBook Pro, Mac OS X (10.6.8)
