Need a little help with an HD... Does anybody knows how Disk Warrior works?...i mean: do it repair phisical damages on Hd? i think my hd has, becouse the needle is "clicking" and cannot read anything...
I have a lot of work in this hd, that was created only for back up...
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View Relatedlast week my mac (1 year old iMc, 2.4ghz intel chip, 4gb ram, system 10.5.7) went all funny, everything was working slowly - so I restarted, same thing, I restarted again and it just went to the grey screen with the spinning ball.Ok so I restarted from my tiger disk and it could see the drive, so I tried to install a new system and it got right to the end of the installation then said because of a disk error it couldn't do it.
Ok so I bought an external HD, put a system on and started up from there - now the drive came up, but things were slow still, it took forever to copy anything so I tried disk utility, it couldn't repair it. I tried drive genius, same thing. DiskWarrior 4.1.1 same thing.
Now I tried again a few times and the programmes took forever to start up but now disk utility opens after about 30 mins and can see the drive, but it's lost it's name and I can't even repair or repair disk permisssions. Drive Genius can see it but not repair and same for Disk Warrior, the 'rebuild' tool is greyed out.
It's a 500GB drive and only has 3GB spare on it, it has loads and loasds of stuff on there, work, music, films, all my preferences, passwords and of course all my software - I do have a backup of some stuff, my photos luckily enough - but I still need to get it fixed.
Now what can I do? Is there anything in terminal I can do? Any other ideas anyone? I'm desperate for help.I have downloaded Data Rescue II and it has been gathering device information for an hour, I'm hoping it will carry on and later on I can start recovering. But in all honestly is there anyway of fixing the drive?And if not can I recover and then do I need to re-format? And if so will it work ok once formatted?Also any ideas why this would have happened?
Yesterday I switched on my macbook (Leopard) and got the flashing question mark. Ran all the resets and booted with disk utility which encountered an 'Invalid B-tree Node' when attempting to repair the disk. Additionally, the SMART status was verified.
I ran DW 4 last night, and performed the hardware tests which reported that the disk was operating like normal. The majority of my media files and additional work is backed up to my Time Capsule but I still have a folder of papers that are relatively new, and wanted to retrieve. While DW managed to reconstruct the majority of my drive (there seemed to be 15g missing - but it's just music files) including this folder, it couldn't replace the disk, as it encountered 'Serious Disk Malfunctions'.
So, via the Disk Preview I want to transfer my saved folders to my TC, but I don't appear to be able to locate it (via ethernet) through DW - even if it's connected when I boot up in DW. So, first request is: Can I connect to my TC to transfer across in DW's preview?
Second is: What are my options if DW can't replace? Do I need to take it into Apple and get a new HD (it's out of warranty)? It's possibly worth noting that I'm a student and have absolutely no money - so cost effective options are a bonus!
I ran disk warrior on my g-4 and the report came up with these listed below.
Warning: SUID file "system/librar/coreservices/finder.app/Resource damaged and will not be repaired.
Warning:SUID file"usr/bin/Ippasswd" has been modified and will not be repaired.
I used spotlight to search for using some of the words but cannot find any thing in reference to the 2 warnings, so I can figure out how to repair them.
I have an I mac running 10.4. I had to reboot it form Dis warrior, DW did it thing told what ever was wrong and it fixed, now when is all done scanning and "fixing" my computer the reset button on the DW is grayed out, only the cancel button is on. I have reboot it about 4 times to no avail same thing happens.
View 3 Replies View RelatedSo my original DVD is Rev 901 of Disk Warrior and I'm using the 4.2 updater.
Has anybody been able to boot Disk Warrior 4.2 build from Rev 901 on a Core i7 MacBook Pro?
I recently used DiskWarrior 4.1 (with Tiger) to check the disk of a Leopard Intel IMac.
All went well, but when I tried to restart and eject the Disk Warrior CD (by holding down the mouse button), the CD would not eject, the Mac restarted with Disk Warrior as the start-up volume.
It seems like it thinks the CD is the start-up disk. I tried the eject button too (at start-up).
I tied resetting the SMC with unplugging the power and cables, no luck either.
Also tried to reset PRAM (several times), but no luck.
Laptop: MacBook (White), 10.6
External: Lion 10.7.6
Booting from an external drive and running DW4 on MAC OS 10.7. Trying to recover from preview pane as my internal drive will not rebuild. The folders on the internal MacHD are visible in the preview but have "minus" on them and I will not copy. It is showing it has zero bytes and when I click on the copy from the preview pane I get a message that says the operation cannot be completed because I have insufficient privilages. My ultimate goal is to get out the home folder for the user and migrate the the user files to a new MacBook Pro.
Info:
13 MacBook White 2.26 GHz (Oct 2009), Mac OS X (10.6.2), Lacie Rugged Ext Drive 500 Gig
If I make a mistake and I can't open OS X. In windows I think you can start in safe mode and undo the mistake? I was installing UBUNTU on an external disk, but for some reason my original OS X is not working and was affected. Disc Utility can see the disk, repair permissions and check hard drive ok. But I can still not boot from it. Now I try DiskWarrior but for the last 15 min it has been stuck on "Locating directory data" so I guess some thing is wrong. I did not try any other apps, for fixing broken hard drives yet. If Disk Warrior don't work I will try TechTool and Genius. Then it's no more options then to reinstall.
View 7 Replies View RelatedMy hard drive decided to quit after only 22 months! Some files were backed up but my current photo albums were not. That's all I really need, I don't care about all the other junk. I've tried booting from the Disk Warrior cd, which Apple Genuis Bar suggested since they don't do data recovery.
So it there another way I can do this myself or should I just bring it to Fry's for $149?
Another question would be, after I recover the files, I'd like to upgrade my MacBook Pro 13 to a Solid State drive. I know I need a 2.5" SATA, but which brand/size is good for a $200-$300 budget?
Info:
MacBook Pro, iOS 5.1.1
Disk Warrior reported a damaged resource header that cannot be repaired. The resource header is in an "older" file format (rsrc). I have been having fairly frequent freezes of the system and Disk Utility reporting a corrupted HD which Disk Unility is always able to repair and report the HD to be O.K. Could the damaged header be the cause of the freezes? If so, can anything be done about it if Warrior says it cannot be repaired?
View 4 Replies View RelatedDisk Utility says there are a bunch of disk permissions that need repairing. I hit repair and disk utility says that it repaired those disk permissions. But when I verify, it says they still need to be repaired.
Info:
Mini 2.4Ghz, Mac OS X (10.6.8)
Just an FYI. Tech Support at Allsoft states The Disk Warrior 4.2 Boot DVD will not Boot the new 2010 MBP's. They are waiting for information (software) from Apple.
Will need to use Target Mode or another Mac connected with Firewire till then. Boot from that then run DW from your MBP.
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
View 8 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
Running Diks Util on my iMac 10.6.2. i am given this warning.
=========
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies View RelatedRunning Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
Macbook Pro running on OSX Mavericks is having problems.
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedI have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
View 2 Replies View RelatedFortunately I got a time machine backup. And its restoring the drive while in Lion recovery mode. Here's what happened... I dont have a router a my place at the moment and so my two phones (iphone 4 and htc android) connect to my internet using my MBP's wifi via internet sharig. For some reason they were not able to get an IP from the mbp. After doing some wifi swtich toggles and forgettig & rejoining the network, i decided to reboot all my devices. I shut down my modem, phones and restarted my mbp. On reboot, after the chime, it showed an unsusal 'progress bar' under the apple logo. The bar progressed to about 10% and then the mbp just powered off. This happened several times even after PRAM and SMC reset.
So now i booted with cmd+r pressed and in recovery mode ran a 'verify disk'. It said the verification stopped and that i should repair the disk. When i tried to do that it said the disk cannot be repaird and that i should back up as many files as possible and attempt to format the disk and restore it with time machine. It is precisely what im doing at the moment.
1. Mbp wont sleep even when internet sharing is off
2. Mbp wont lit the onboard display upon opening it in clamshell mode until i removed the 3.5mm audio cable of my speakers from the audio out port!
Info:
MacBook Pro, Mac OS X (10.7.3), Mid 2010
I just tried to use my MacBook pro but its showing a loading bar and it loads for like 5% and then shuts down.I read the instruction booklet and it says that I should tried to repair the disk or reinstall Lion but when I tried to repair it stops the process and when I try to reinstall its telling me that the disk is Locked...
Info:
MacBook Pro, Mac OS X (10.7.2)
I have a very old E Mac running version OS X version 10.1.5. My Mac is showing a flashing question mark so I have tried to repair it using the Install Disk provided with my E Mac. Unfortunately, when I insert my Mac OS X Install disk (which is for version 10.1.4) and press the C key at startup and click on Disk Utility the "Repair Disk" button is greyed out (although I am able to Verify the Disk.) How do I get round this problem? (I should add that I have had the flashing question mark once before, and I was able to repair my E Mac on that occasion as I was able at that time to click on the "Repair Disk" button. However, I can no longer do this.)
I have also tried using my OS 9 Install Disk, as I was using OS 9 the last time before the flashing question mark appeared. When I go into Disk Utility using that disk, I am able to click on the "Repair Disk" button but it lists errors that it says it is unable to repair.
Info:
eMac, Mac OS X (10.1.x)
please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
how do I repair disk using disk utility
Info:
MacBook Air, OS X Yosemite (10.10.1)
