Hardware :: Time Capsule - Reported Disk Size In AirPort Utility
Feb 22, 2010
I bought a new 2TB Time Capsule, and had problems completing the initial backup. I finally sourced the problem to files that were buried deep in a stack of folders, which seemed to make the file name/path too long. Anyway before I realized that I tried to reformat the Time Machine, and this seemed to work ok. However Airport Utility is now reporting the Time Capsule Disk Size as being 1.8TB, rather than 2TB.
I think before I reformatted the disk it showed as being 2TB in this menu, but I cannot be sure. I am worried that I have somehow formatted it wrong and lost some data space? If I go into Disk Utility, it does say there that the Data partition is 2TB, so it seems strange that Airport Utility shows it at 1.8TB. Can someone else who has the 2TB Time Capsule let me know whether in Airport Utility it shows as being 2TB or 1.8TB?
I needed to check on my network. When I opened Airport Utility, the only thing that loads is the internet icon, showing green. Neither my TC, or an older airport extreme on my network, are identified. Clicking on the drop down shows "no new wifi or airport devices found" .Â
I have been using a time capsule for about 2 years. I use it as an external wireless hard disk as well as a router for extending my wi-fi network (connection via ethernet). Â
For the last couple of days, Airport Utility has been showing two time capsules connected to it. One is "HVS Airport Time Capsule" and the other is "Yogender's Time Capsule". The second one does not belong to me. I have no clue who's time capsule this is. A screenshot is also attached here (one on the right does not belong to me).Â
Does it mean someone is hacking into my wi-fi and using that via their time capsule? I've changed the wi-fi password (for my time capsule's network and the original network) several times, but it still shows up.
This unknown time capsule also shows up in the finder under "Shared". Â
I'm running OSX 10.4.11 on a 12" PowerBook 1.5 GHz with 1.25 GB of RAM and an 80 GB HD. When I run the disk Utility to Verify Disk, it ends with the message, "Error: The underlying task reported failure on exit." This happens if I run the Disk Utility from the hard drive, from the OSX installation disk or from an external hard drive. The Repair Drive button is always grayed out no matter where I am running the disk Utility from, too. I have cloned the entire hard drive onto an external drive with Carbon Copy Cloner. I know PPC systems won't boot from a USB drive, but I was considering booting from the install disk, re-formatting the drive from there and then re-installing from the external by running CCC from there.
I just got my new i5 iMac. I have migrated my data to the new computer. Can I erase my time capsule so as to start fresh? If I can, do I erase it with disk utility? Is this even a smart thing to do?
I've got a 24" imac which i've had for a couple years now but i just recently purchased a new 15" macbook pro as i was needing a laptop for going offshore. I also bought the 1tb time capsule. I had a real problem setting it up as the time capsule was not appearing on the airport utility, but after a while of messing around, i think i got it working. I have a bt homehub (wireless router) which has an ethernet cable going into the time capsule (wan port). I can now access the time capsule through the imac, macbook and my dads windows laptop. So i had a heap of movies that i put onto the time capsule and they worked fine. But now for some reason when i go to open a movie, it takes forever to load up and when it finally does its starts to buffer etc. So can anyone give advice on how to sort this? Because before the movies just opened instantly and played fine.
One other thing i wish to do is to access my time capusle from my macbook when im offshore. I've heard this is possible to do it from "back to mac" via mobileme which i have. I tried to set this up but when i registered my mobile me details to the time capsule it starting restarting it which i presume was to update the details. But it failed and then the time capsule didn't appear on any of the computers again. After eventually getting it back by restarting etc i think from then on was when the movies started playing up on it. But i have not tried to do the back to mac again incase it does the same thing! Its really driving me mad, i have been tempted just to take it back and get a normal HD but i'd rather not! As i thought by having the time capsule it would save me taking a HD with my macbook when im offshore.
I have been using time capsule for only a few weeks and I have noticed that the file it has created "Elliot Newman's MacBook Pro_001b63936847.sparsebundle" only reads a file size of 95GB, when the disk I am backing up has 148GB used. Does this mean the backup doesn't contain all my files? I have to say it concerns me a little that the backup shows only a single file, is there anyway to see the files that time capsule has backed up? I am updating my MacBook soon with a bigger internal drive and I want to make sure all my files are backed up before I do this.
I've been having trouble backing up my MacBook Pro to my Time Capsule (hasn't backed up in months) so I ran Disk Utility and it gave the following error: Disk Utility stopped verifying "Hard Disk". This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. So, if I do that, will I end up losing whatever is on my hard disk? And how do I start up the computer using the OS X disk? Just put it in and restart?
I just secure erased my Time Capsule disk through AirPort Utility to set it up with my new iMac. After erasing the 1TB disk, AirPort said that the disk capacity is only 931GB even though the Time Machine preferences displayed 998GB available prior to me initiating the first backup. Does anyone know why this discrepancy exists? It should be noted that the previous backup on the Time Capsule disk from my old Mac took up about 68GB so is AirPort Utility just struggling to show the new capacity after the secure erase?
My new 2010 hexacore Mac will have 24G memory, an OWC Extreme Pro 120G SSD (positioned in the lower optical bay) and four 2TB WD RE4 drives. I'll use my old Synology 209 NAS (two 1TB WD Green Raid 1 drives) for TM backups over 1000Mbps Ethernet. Yes, I'll need to upgrade to a larger NAS very soon. This will be my first Mac Pro (have MBPs and iMac) and will be used for web design and development (mostly Adobe CS5 products).
The SSD will be used for boot and application files. I plan to use Disk Utility to create a 1+0 Raid array for data files. For a Scratch disk, should I: 1) create a partition on the 1+0 Raid Array for Scratch 2) partition a chunk of the SSD for Scratch 3) attach a spare external 2.5" WD drive via Firewire 800 for Scratch
Based on my reading, it seems that option 1 makes the most sense but I'm not entirely sure if you can partition a 1+0 array with Disk Utility. I'm pretty sure option 3 is quite silly but wanted to toss out the idea. Lastly, are there any generic recommendations on scratch volume sizing?
I'm new to mac, have been using mine for only three months now, but couldn't help noticing a strange thing. When I go to Disk Utility or cmd+i on a selected partition, the size reported by OSX is incorrect. E.g. I have a 250GB disk, so I'm used to seeing 232GB as usable disk space, which is a totally normal thing. However, OSX tells me that my disk is actually 250GB. More advanced partition utilities (currently I'm using iPartition but suggestions are welcome) report the disk size correctly. So I began to doubt whether folder sizes are reported correctly or "scaled up" to match the size of the disk?
E.g. if I was an ignorant consumer and tried to put 250GB worth of data on the disk, it wouldn't fit as there is not enough physical capacity to accommodate it, is that right?
Is it the normal behaviour or I screwed something up in the system?
I forgot the name of a small app that allows to browse a disk and calculate folder sizes in order to clean a disk. I think the icon was a disk with a broom over it.
I just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
I partitioned my disk using Terminal's diskutil. I decided i didnt need the partition anymore, so i deleted it (using Disk Utility.app) and added the free space to my mac partition. Basically, Finder and Terminal dont show the free space added back, and Disk Utility shows the space added back to the disk. I tried restarting, repairing disk (which coincidentally had an unrelated problem), repairing permissions, but the problem is still happening
I will be getting my new Macbook Pro in the near future and am very interested in using Time Machine to wireless back up my data to an external hard drive. I know I can use Time Capsule to do this, but also hear a mention of just getting an Airport Extreme and my own ext. hd. My question is that I have Verizon FIOS Internet and my modem also functions as a wireless router. How would the Time Capsule/Airport Extreme work with this? Is it possible? I do not believe that the Verizon router supports wireless N, and I would like to take advantage of the faster speeds. If I were to connect a Airport Extreme to the wireless router, would I then have 2 routers to choose from and just use the Airport Extreme to use the wireless N? I'm very confused as to how I could make this work.
I am connected to a wireless router downstairs for my internet connection. I am trying to use my new (bought second-hand on ebay) time capsule to store all my files on. I have installed the disk that came with it but when I try to find the capsule via Airport Utility it is unable to do so. The amber light is flashing like it is supposed to. I have tried using the ethernet cable also but my mac doesn't notice it
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
I don't have enough space at my Time Capsule, and I noticed that I have backed-up some silly big folders like Downloads. So I assigned them for not to take backup. But time machine already took backup of them and keeps space in Time Capsule.
I have a time capsule coming on Monday. I currently have an old airport extreme connected to my DSL. Can I keep accessing the internet through the old Airport Extreme and use the Time Capsule just for Time Machine backup? This is the type of Airport I have right now.
I have a MacBook Air. My husband and I are novice to Mac and we have set up an Airport Time Capsule to back up the computer. We are able to back it up, but we cannot find the icon to the Airport Time Capsule. When I check in system preferences, and networks it isn't there. My data is being backed up, but we recently added Apple TV- and the icon has disappeared.
Anyone have experience hooking up a Drobo to a Time Capsule or Airport Extreme and how it compares to the Drobo networking device? Don't really want to plunk down $200 for duplicate functionality.
I currently use my Airport Express as my wireless router. It's also plugged directly into my stereo so I can take advantage of AirTunes, which I love to do.
I was thinking of purchasing Time Capsule, but I suppose there's no way I can take advantage of it's 802.11n capabilities and continue to use AirTunes on my network?
The Apple site is quite vague on this point but I thought I'd clarify before buying one. I have a Time Capsule as my main router, but I want to move it, but when I do it's out of range of one of my computers. Can I plug the Express in near the computer, and then Ethernet it up to the computer, or is that Ethernet port meant to go into the TC?
So here's how it is set up at home: my parents have an AirPort Extreme Base Station by our upstairs computers, which is connected to a modem and we use that to get our wi-fi throughout the house. I want to buy an AirPort Express to use to stream music in my room. But I also have a Time Capsule, which I need so I can back up my Macbook. I know that an AirPort Express can be used to extend an existing network. So would it be possible to plug in the Express in my room, use it to extend our upstairs network, and then hard-wire the Time Capsule to the Express through the ethernet port and use that to connect the Time Capsule? On paper that seems like it would work, because the Express would be receiving a signal from the base station upstairs, and then sending it to the Time Capsule, giving them both access to the network. But I just want to make sure it would work before I drop $99 on an Express.
I have a Time capsule (1Tb) and wanted to extend the network in the house. i bought an Airport Express and configured it to join the existing network. It works and I see a green light. However, I do not see any increase in the signal (of a PC) whether or not the Express is in.
My NETGEAR WNR854T died and I am looking for a replacement.
I do a lot of online gaming and HD video streaming, and have several wired and wireless devices in the home network. I also have been thinking of getting a shared backup hard drive.
I started looking at the NETGEAR WNDR3700 unit, but there are a lot of people complaining about dropped connections. So, I am now looking for an Apple Airport Extreme.
During my research, I found also the Apple Time Capsule. Is there any advantage to getting the Time Capsule? Or should the Airport Extreme be better by adding any external hard drive to the USB port?
Also, is model number MC340LL/A the correct one for the Apple Airport Extreme?
I picked up my first Mac about a 2 weeks ago and over this past weekend I picked up a new Time Capsule. Originally I bought the Time Capsule to wirelessly bridge to my Linksys router running DD-WRT (mega) but apparently the ethernet ports won't work on the Time Capsule or the Airport Extreme when connecting them to another party wireless router. So i have taken out my Linksys and am now only using the Time Capsule. The reason for the Time Capsule is to have backups on it and that for some reason I do have wireless issues with my Linksys that I am not having with the Time Capsule. Such as when I had a iPhone I would lose my wireless signle a lot and have to reboot, same with my iPad and sometimes with my Nexus One. So far none of those issues with the Time Capsule. I'm not missing much from my Linksys but one of the things I miss is being able to open up a browser from any network connection and being able to connect into my router. Is there a way with the Time Capsule / Airport Extreme to be able to access the configuration settings when not on the local network? Such a when I am at work I want to be able to access the configurations page.
