With my MacBook Pro sitting on the desk right next to my Airport Extreme Base Station, I get, according to iStumbler, a varying signal strength between 50 and 75%. I see the same with my wife's MacBook. I also have an Airport Express in another room set to "Extend a network" and I see about the same there. Shouldn't the signal strength be higher?
I just upgraded from 10.4 to 10.5 and my Airport meter is now reading 2 bars instead of 5. Same router, same position, different OSX only.
View 2 Replies View RelatedI am having random slowdowns on my connection speed using Airport (nothing to do with the notorious performance issues which I also suffer).
My appleTV and my HP 2140 get 90% (it's right by the router) and 80% (floating around the same floor of the house) signal strength respectively, download speed and throughput seems very stable on both, however on the iMac (that's about 10 feet away from the router) the signal strength is 28% ! this is incredibly low and even though it does not always hurt download speed it does hurt the total throughput when sharing files over the network. Also the SNR (signal to noise ratio) is incredibly low, below 30 all the time.
So this is my network set up:
A) Cable Modem connected to ethernet cord to new Airport Extreme Base Station.
B) Three Airport Expresses located around my house set on extending the network.
The airport extreme station is in the master bedroom and the room I am in is approx. 15-25ft away (thru a wall of course). I ran iStumbler and am getting ~42% signal and 23% noise from the main airport extreme. I am getting about 49% from one airport express with ~15% noise, ~42%/17%, and ~45%/15% from the last. Sometimes they can drop as low as 35% signal... This is not prime. Now, I do get better signal during the day, so other networks could be interfering.
I have checked local networks and their respective channels, and moved mine to an all time random number of 3. The other networks are mainly on channels 6, 8, and 11. Before I moved my network to 3, it was on channel 11. I get the same signal/noise before and after the channel move. Finally, to finish off the description... This current computer is located on the third floor. The main airport extreme is located on the third floor as well, with a relay airport express right outside the door of the master bedroom. It relays to the other 2 airport expresses. (it is also a regular airport express). Currently, all Airports are set at a Multicast rate of 2mbps.
I have a MacBook, with OSX 10.4.11. It uses an AirPort Extreme (0x168C, 0x86) and it connects to a Linksys router which is attached to my cable modem in the basement. Approx. 4 days ago I started noticing that the signal strength would vary, and then drop off all together. I have reconfigured my router, downloaded the new firmware for it, and been online chatting with Linksys techs all day. We have had no problems for months with this router, or with signal strength. My wife brought her MacBookPro home this evening to see if her machine would connect to our wireless network. Fired it up and no problem. Her machine, using the same airport card in it, had no problem with signal strength.
View 4 Replies View RelatedI've recently converted to mac and replaced my 8 month old Vaio AR11s with a new white macbook(2.16ghz). Recently I am having all sorts of problems with the wireless. I've been reading this forum for a week of so now and realize that I am not alone with my WiFi woes. My problem is the fact that my wireless intermittently drops and although the signal strength is still showing full I have no internet connection until i turn off and on the airport card.. this happens on both psu and battery!
I have tried installing the 2007-004 update, deleting the airport.plist file and the 2007-002 update and it appears to fix the fault for a while but then it comes back. I' ve also messed with enable/disabling frame bursting,different channels on my netgear wnr834n router but my other mac(using ethernet, bought a 24" imac tuesday!) and wifes vista laptop (wifi 802.11g) are fine so I have ruled out the router.
I have my AE set up in my office where three computers and two printers are picking up its signal just fine. However, I have a computer in another room that is only about 30 ft away from the AE router and sometimes the signal is very week while other times it won't connect at all. Yet, I can pick up other networks from other houses just fine.
View 5 Replies View RelatedCan I add an Airport Extreme to a network to get a stronger signal? Im using my roommates wireless (WAP) signal with only one bar. I have the white Airport Extreme that looks a flying saucer. (802.11g?) to his Linksys wireless.
i am trying to get my airport extreme to receive a wireless signal and send it through a ethernet cable to my computer. how would i go about doing this?
View 2 Replies View RelatedI'm using an airport extreme (latest firmware) with 10.6.3 on a mac pro and a macbook pro. The mac pro is wired the macbook pro is connected via wireless.
I constantly have signal drops. While the airport extreme seems to stay online (green light is sold) the cable modem always resets itself.
I can't figure out if this is because of my Optonline service or due to my router (airport extreme). Cablevision states nothing is wrong with my cable internet connection and the issue may be with the router. I've tried three different modems from them and they've supposedly checked everything (wires, signal, etc). I still think it has something to do with them. I'm hesitant to try DSL as it is slower (no fios here yet).
I don't get how it can be the router if both my desktop and laptop lose connection to the internet at the same time if they happen to be connected online at the same time.
Is there anything I'm overlooking in regards to the airport extreme? Should I trash a particular preference or try a different setting?
I'm kind of desperate at this point since it is highly annoying to constantly get knocked offline more than 5 times a day.
I'm looking for a "Signal Strength" app and it's for the Wireless network of course!
View 4 Replies View RelatedI am using a wireless network on my 17" PB and the signal strength is low and am downloading music, how can I increase the signal strength (lets say i cannot move).
View 6 Replies View RelatedIs there a program where I can see the signal strength on my mac? I just want to know if it can be done without a third party program.
View 4 Replies View RelatedAnyway to see signal strength for my 3g USB modem connection?
View 3 Replies View RelatedIs there any tool or utility for OSX to measure the signal strength of a bluetooth connection?
View 2 Replies View RelatedI have a I mac and an airport. I've been having problems lately(one month) every time I try to connect to the net. it says there is no connection. if I refresh, it works. the reception icon was showing full (4 bars). 3 days ago, no reception, o bars, today, I got it back. i am about 50 feet away, around a corner outer house wall. nothing has changed in terms of new or moved electronic equipment. I even turned off my 5.0 ghz phone.
any thought on how to fix this?
I am on a macbook. My wireless was pretty decent during winter break but when I come back for spring break, it is ridiculously slow. The signal strength is completely full, but its almost dial up slow. my wireless on my iphone is blazing.
View 9 Replies View RelatedDoes anyone know how accurate the 2010 macbook pro wifi signal strength monitor is? There are times I have full bars but my internet is really slow, or stops working all together for a few minutes. I THINK, because I'm on a different floor than the router, which would explain reduced signal. BUT my computer says I have full bars.
View 4 Replies View RelatedMy iMac HDD making terrible sound and wi-fi signal losses each 30 minutes.What can i do?Coz it is really to noizy!
Info:
iMac, Mac OS X (10.7.4)
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
View 21 Replies View RelatedI just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
View 2 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Info:MAC Book Pro, Mac OS X (10.6.4)
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedThis might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
View 2 Replies View RelatedCan it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Info:
AirPort Extreme, Mac OS X (10.7.4)
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
Info:
Airport Extreme
i have top of the line Airport Extreme with the N enabled on my MacPro yet i get a Crappy Signal what gives? anyone else have this problem?
View 11 Replies View RelatedI'm all of the sudden having problems with the airport connection in my MacBook Pro laptop at home. In areas where it used to work---a week ago--the signal comes and goes from 4-5 bars to all of the sudden none and I am disconnected from my wireless internet. Nothing else has changed (cable modem, wireless router).
View 4 Replies View Related