I recently replaced my aging linksys G router with an Airport extreme. I have an HP 2605dn printer connected to it via ethernet. When I set this up with the old router everything worked great, printer showed up in OSX and added with a couple of clicks. Now that I have moved to the airport I cannot find the printer at all from OSX on either my MacBook Pro with 10.6 or my Powerbook with 10.5. However all of the Windows 7 machines I have in the house see it and print fine. I feel like I'm missing something very simple and help would be amazing.
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Here is my situation. I am a network newbie. I bought a Airport Extreme (2008 model without dual band & guest networking) and have it setup with my ADSL broadband modem. I bought it so I could use the high speed N to connect to my Apple TV. It replaced a Linksys WRT54G.
My concern is this. We have another laptop in the house which only has Wireless G. It is connected most of the time to our network, so I presume that it will be slowing the speed of my Extreme to G levels.
Can I connect my old Linksys G router somehow to my network to create a seperate Wireless G network to access the internet. The older laptop can be at G speeds and my Extreme network remaining at N speeds ?
Maybe an easier option is to buy a N USB adaptor for my laptop but I don't want to buy something if I can use my current equipment.
So I purchased a brother MFC 290C so I could both print and fax.
I was able to hook it up to my airport extreme base station (the n version) and set up the printing function from multiple computers. So I am happy with that.
However I am unable to set up the network scanning function because I need 1 of 2 pieces of info:
Either the IP address for the printer OR the mDNS service name..
Now the printer is hooked in to the base station using the USB port. What is the easiest way to find its IP address? I am not allowed to enter anything for mDNS, I have to browse, and I can not see any choices when I browse for it.
Quick question, if I were to get a usb hub to use with an airport extreme would I be able to use both an external hard drive for backup and a printer for wireless printing or will it only let me use one? Also, would I be able to do this with an airport express? From what I see it seems like the express doesn't support hard drives.
I have a 1.5TB external HDD that I am using with my iMac. But I have just added a MBP, so now I have two computers that need backing up. I was thinking of time capsule, but someone suggested I just get an airport extreme and hang the 1.5TB drive off of that. Is that do-able? But also the MBP only has 2 USB ports (my old Dell had 4). If I got the extreme, could I split the USB port and have both a HDD AND a printer off the extreme? Now that I say this out loud (or type outloud), this seems unlikely, but I thought I should check.
I was trying to set up my printer (HP 1515) so that I can print to it even when I am not on the LAN, but also using WAN. The airport extreme has now been set up for Bonjour and all that, but the HP printer is connected using an Ethernet cable, NOT USB. It seems the Airport printer sharing is made for connecting a printer to the Airport USB port, and NOT for any ethernet printers.
Is there any way I can print from outside - WAN - to my LAN printer, connected via ethernet to my airport?
I have a MacBook now running Leopard 10.5.5 and an Epson Stylus DX4400 printer. Since I installed Leopard I cannot print via the USB connection from my Airport Extreme. I can print only if the printer is connected directly to my MacBook. This used to work fine when my computer had Tiger. I have spent hours trying to fix this with a 2nd tier tech guy at Applecare, but without success. Epson refuse to help on the grounds that routers aren't supported, or something. The printer appears to be recognised by the Extreme but when I print, the job does not appear in the print box which just says "printer ready" .
I have had to previously UNINSTALL the latest firmware version for the Airport Extreme (7.3.2) because this firmware seemed to be causing previous problems - namely my MacBook not working with Airport at all, or at least only intermittently. Leopard was installed in attempt to solve this first problem - it didn't at first, but seems to be OK now. The printer issue arose only after Leopard was installed. When I add the printer when located at Airport Extreme via System Prefs Print and Fax, it appears to find and add it OK, and indeed the printer is there with 'Airport Extreme' as the location.
I would be so grateful for any suggestions. Both Applecare and Epson have run out of ideas.
I just bought a Toshiba satellite laptop with Windows 7 and am trying to set up my printer. I have a Canon Pixma MP500. I'm using my airport express for the router. I have no trouble connecting to the internet. It works perfectly. The problem is trying to get my printer to work with the airport. I've tried creating a new port with the ID address but my printer does not show as an option. Of course I can't find the installation cds (figures!). I have been able to add the printer under the local printer, but then I have to go back into the set up network/blue tooth option and it recognizes it. But then when I try to print it says that something is in the print queue blocking the current printing, but there is nothing there.
Im super stumped on this one. I had been using my AE with a USB Hub and HD (for TM) for several weeks. My modem went bad- 2 days later it was replaced. Now, its like the USB port on the AE is dead. I determined that the hub was bad and got a new one. Plugging the USB hard drive straight into the USB port worked for a few minutes. Plugging the printer straight into the USB port allowed me to print 1 page and then it disappeared. I need to get everything working through the hub (brand new, confirmed working). Currently, nothing shows up in Airport Utility under Disks or Printers. Ive reset the airport and disabled / re-enabled file sharing.
I need to set up a Macbook Pro, Dell Laptop, and HP Wireless enabled printer to my home network. I have an Airport Extreme. Can this be done without having one of the computers hard-wired to the router?
I have an airport extreme that is currently connected to a printer so that we can print. I want to add a hard drive to back up all the computers with time machine. They are all apple computers running leopard. I was considering buying the time capsule, but was wondering if I used a usb hub and an external drive, would this work as well also. Not trying to run any programs on the hard drive. Just want a back up in case something dies. I guess my question is should I buy a time capsule or will the external HD, usb hub route work as well.
I have been trying for about an hour and it keeps saying there was an error and the scanner cannot be found. can you access the scanner from your mac or not? i keep having to plug the usb into the computer to recognize the scanner.
i'm using an airport extreme as my primary router for internet and everything, and i have a airport express set up in my bedroom for wireless music. i've set it up that the express is joined with the extreme so internet (from the lounge room) and music (in my bedroom) all run through one network.
i just purchased a printer which i plugged into my airport express to enable wireless sharing, and in airport utility it shows the express is connected to the printer, but while im connected to the extreme it wont let me print to it, however it'll still let me stream music to it. And to make is very frustrating because the networks are joined, it wont even let me connect to just the express to do the occasional printing that i want.
I want to buy an Airport Express to connect to my university's wired network so I can have a wireless connection, use my speakers wirelessly, and print wirelessly. However, as far as I can tell, there is no way to password-protect the printer sharing feature, meaning that my printer would be free to take print jobs from anyone on my building's network. Can anyone confirm this or set me straight?
I want to get an airport extreme base station to replace an old Belkin router that I use now.I have Virgin broadband and I currently connect three MBP laptops and an iphone via wifi and a Mac Pro and an Xbox 360 via ethernet to the Belkin, which is connected to the Virgin modem.The Mac Pro and one MBP also run Windows 7 using Bootcamp.I also have an old PC upstairs running windows xp that connects via wifi using a Belkin USB N adapter.All of this works fine now, but it's a bit slow due to the old router which is only pre-N.
I recently got a PowerPC G4 from a family member and reinstalled Mac OS X 10.5. I did this without the Airport Extreme card installed. After installation I put the card in, and after booting up I thought the card would be recognized. I was wrong. Any suggestions besides that the card might be bad, that I can do to fix this? The card works on other machines.
I need to know how I can set up a system so that I can use the printer and browse the internet wirelessly on the MacBook Pro and have the non-wireless PC connect to the internet and use the printer as well.
It sounds confusing, so hopefully one of you guys will be able to understand it and maybe quickly draw a labeled diagram to show me.
I am attempting to connect my Dell AIO Photo 926 printer to my wireless network (WPA2). I use an old Apple AirPort Extreme (hereinafter "AAE") as my router (it's the old "dome shaped" one). I believe that heoretically I could plug the printer into the USB port on the back of the AAE and any computer connected to that network can print to the Dell printer. I have installed the drivers for the Dell AIO Printer and it prints fine when connected to my laptop (Windows 7). However, I am having NO luck doing this when I go to Control Panel and run the "add a printer wizard." Is there anyone who might be able to point me in the right direction to a tutorial or something? Is what I'm trying to do even possible with an AAE and an "older" Dell printer?
My home network is using a Netgear wireless router, which is just used for sharing the internet. I was wondering if Airport Extremes could be placed in another room to connect to a USB hard drive and share it, as well as extending the internet from my Netgear wireless?
I already have an airport extreme to go along with my new alum macbook. But my wife's pc laptop and my iphone are only G wireless and not N so when they are in use it slows the network way down. If I bought an airport express could I link them together on the same network (to share printer and HD on the extreme) and have one handle the N traffic and one handle the G traffic?
My university says the ethernet network that they supply in uni halls of accomodation does not allow wireless devices, surely they can't make it so that you cant use an airport extreme or some other device to make the wired network in to a wireless one. The connection is through a proxy and uses PEAP. They also use 802.11X authentication. How can i use my airport extreme in my room so i can use my laptop wirelessly?
I just bought an Airport Extreme.I have two desktops (wired) and a laptop (wireless).They all can connect to the internet fine (wired and wirelessly respectively). But there is no network (file sharing, itunes sharing, etc.) I was under the impression that the difference between the AP extreme and AP express was that the extreme is also a router (capable of creating a network).
Can I add an Airport Extreme to a network to get a stronger signal? Im using my roommates wireless (WAP) signal with only one bar. I have the white Airport Extreme that looks a flying saucer. (802.11g?) to his Linksys wireless.
I bought a Airport Extreme (2008 model without dual band & guest networking) and have it setup with my ADSL broadband modem. I bought it so I could use the high speed N to connect to my Apple TV. It replaced a Linksys WRT54G. My concern is this. We have another laptop in the house which only has Wireless G. It is connected most of the time to our network, so I presume that it will be slowing the speed of my Extreme to G levels.
Can I connect my old Linksys G router somehow to my network to create a seperate Wireless G network to access the internet. The older laptop can be at G speeds and my Extreme network remaining at N speeds? Maybe an easier option is to buy a N USB adaptor for my laptop but I don't want to buy something if I can use my current equipment.
I am in need of some help with my AEBS v2. I just bought it today and a little bit confused coming from a Linksys.I have an HP Photosmart C4480 and setup the printing and it works with my MBP but when I try to add it for my sister's Windows XP laptop it can't find the printer whatsoever even with bonjour installed and all. I'm in need of your assistance to get it working.
I want to test the range of an AE base station at a theatre that I'm installing wi-fi for. I'm wi-fi challenged, so the AE was my choice when setting up my home network. I may need to extend the theatre's network with an Airport Express, but want to test the range of it with my AE base station from home. (Got that?) [oh, and it's a theatre I work for and am installing all sorts of fun goodies. I'm good with stuff but wifi makes me corky thatcher. -ed]Since I'm wi-fi challenged, will it totally mess up my settings on my home network if I try to use it at the theatre? If it will, then I'll just buy a fresh one for the theatre and see after that if I need an express. I'd just like to run to the apple store once, not twice
I'm not very well versed in networking or IP stuff, but maybe someone can help me. I have an airport extreme running the wireless network in my house. I know my IP number (it changes, but I'm switching to a static #). Is there a way I can access my network over the internet through the airport extreme? I have a mini-server device running on my network that utilizes port 80 and I'm sure there's some way to read that over the internet. (if I'm using the wireless network, I use address http://10.0.1.3/webpage.html to view) Is there a way to view that address from the internet? And lastly, if am I opening up a can of security worms if I try this?
