Hardware :: Doesn't Seem To Remember Brightness Settings For AC?
Apr 8, 2009
Here's something I've wondered on and off for a while, just remembered it now so I'll ask.
The enduring issue I've had with all of Crudbooks (well, among many other issues - but they've usually been different for all models/refreshes of Crudbooks) is the screen brightness on AC and battery. It doesn't seem to intelligently switch in the way that for example Windows does. Or to put it more specifically, it doesn't seem to remember brightness settings for AC and battery modes that well.
It is of course the matter of a few seconds to adjust the brightness but I wonder if there's a way of doing it automatically. A potentially basic question, but something I've never bothered to find the answer to. Any takers?
Probably a simple answer, but everytime I click view in colums, everytime I close out of finder it forgets my settings and goes back to the other setting.
I'm guessing no, since every time I change the window size and position and close Firefox and restart it the next time, the window size/position is right back to where it was before I changed it. This is REALLY annoying. Is there any way to get FF to remember my window settings?
ever since updating to 10.5.7, my Mail has been acting strange. I had both a MobileMe account and my university's POP account set up to work with Mail. After updating, it only kept the Mobile Me account. I didn't really think anything of it and just added an account for the university email. It all worked fine until I restarted my computer, where it again lost all the university stuff but kept Mobile Me. I did this another few times but nothing changed. I tried searching around to see if anyone else had this problem but came up with nothing. Does anyone know a solution to this?
I have a new iMac 2009 - 24' - 2,93Ghz, running the latest OS.
When I start, the brightness is at maximum... I set it to minimum, only to find it at maximum again when I re-boot the computer ! I tried setting it via settings as well... it just dosent stick !
On the flip-side, the volume retains its last settings.
I have a two year old 13" mac laptop. 10.5.6 / 2 GHZ Intel core duo/2GHz667MHz. My problem is this: within the last month the brightness setting has shifted from bright to dull all by its self. Each time I move the slider up (pref. display) it moves down so that my screen is difficult see.
Are the led's under the keys auto controlled due to the amount of light in the room? I use my MacBook pro on battery most of the time and every time I go to turn up the keyboard brightness its in a different place. I want to set it to be at a specific brightness when its plugged in and when its running on battery, at a lower brightness but the same every time. I want to be able to have settings for the led brightness.
I have an old Dual 2.5 GHz PowerPC G5 (aluminum tower). When it boots up, I get a message that the Date & Time are no longer correct. I go into date and time settings and reset them, however when I shot down and reboot later, the time has been reset to June 1969 or some similar date. Also, when the computer shuts down, it cannot be rebooted immediately. If I try to reboot it, I hear the fans start up and drives start spinning, but then they all seem to power down (a red light can still be visible inside. If I shut it down and wait 15 minutes, it will boot up fine, however the date/time has reset to 1969.
I have done the obvious things like replacing the clock battery and resetting the pram and smu, but still no joy. I suspect a hardware fault of some kind, but don't know what to try next.
What setting do you use on your new MacBook Air? I'm currently at an older non-LED MacBook, and when working with the LED-screens on the newer MBPs I kept noticing that I couldn't really find a proper backlight settings. The top 3 where OK but everything was almost too bright, while lower settings made everything look very dark and greyish.
I played around with the Airs a bit in the store, and I think they were very similar in that regard. But it's hard to say because of the store lighting and not being able to use it in various situations with different lighting.
the monitor's default brightness setting is far too bright for my eyes, so the first thing I did was to open the System Preferences pane and reduce the brightness setting. That worked fine until I shut the computer down. On rebooting, the brightness returned to its default highest setting. On my older iMac G5, the brightness setting always stayed put. It isn't a huge problem since adjusting the brightness setting does work, but I don't want to have to adjust it every time I reboot my computer.
I spent two hours yesterday on the phone with Apple support trying to fix the problem, even going so far as to reinstall the system software with no success. The woman on the phone finally suggested that I return the Mac for a replacement.
Has anyone else here with a 2009 iMac experienced this problem? Is it possible that it's hardware related? If so, could this be the tip of the iceberg suggesting a potentially larger problem down the road? I would have guessed it might be a software glitch. (The new iMac has thrust me, finally, into Leopard; until last week I was using Tiger on my older G5.) I bought the 3-year Apple Care with it--since the new iMacs have only been out a week, should I wait until the next Leopard update and see if that fixes the problem?
I've made a Smart Folder to have one place to look for any bills I've paid in the last 40 days, with the following parameters:
- Search within a folder within my Home folder called "Accounts & Services"
- Name begins with "PD 2" (all my paid bills are labeled like "PD 2012-02-01 AT&T," for example)
- Last modified date is within last 40 days
The folder worked when I created it, and whenever I opened it for a day or so afterwards.
But a month later when I open the Smart Folder, the latest bills aren't there.
When I "Show Search Criteria," I see the "Search within" has been changed to a circular reference — it SEARCHES WITHIN THE SMART FOLDER ITSELF!
The practical upshot of which is that it finds only the files that were found at the time the Smart Folder was created, and does not find anything newer because it's looking in the wrong place.
I'm hoping someone has a remedy for this, but I don't have high hopes considering the "Mac Quick Tips" podcasts from 2009 in which Smart Folders are demonstrated show this problem in the demo without realizing it.
When I visit websites, I constantly have to hit the zoom in button in the Safari menu bar. If I don't do this, there are words that overlap on the page. Is there a way I could make Safari remember my zoom options? I have 18 point selected under the Advanced section of Safari System Preferences. I also use Chrome and Chrome seems to remember my view options.
Info: MacBook Pro, OS X Yosemite (10.10.1), iPhone 5S, iPad 4, iPad Mini, iPod
I need to change the color and brightness for a video file for a presentation and cannot figure out how to change them permanently when I open the video file in Powerpoint. When I open a video which I have altered the AV settings on in another program, the settings revert to the initial settings. Can I edit the color and brightness settings permanently in Quicktime 7?
All of a sudden, every time I reboot, my screen's brightness is all the way up. So, I go to 'Preferences' and bring it down to only happen again the next time I reboot. Not a terrible problem, I hope, but not sure why the settings of this doesn't remain as I left it last. Perhaps I have picked up something OR I have a fault which could get worse?Anyone seen anything like this?
Under normal office lighting, I find anything other than 100% brightness seems too dark. But I've been getting huge amounts of eye strain so am wondering whether to turn in down some more, say to 50-75%, but worried that will strain my eyes even more. What do you guys have your 13" set to, assuming good ambient lighting?
My wife has an iMac (I don't know any other way to identify it e.g. model number), and she has this 3rd party calibration software that I'm trying to use. I am not used to a Mac, and I cannot find the display settings for the monitor. There are no buttons on the monitor, and when I go to preferences, I can only find the brightness control. I've googled this and cannot find a clear, simple answer. I have used every version of Windows (currently on 8.1 on my PC) and it's easy for me on that platform. I suppose it's just that I don't really know how to navigate Mac OS.
Suddenly Mail won't send or receive. When I look in Preferences>accounts the mail server setting is empty. If I set up a new account and manually enter 'url...' it is removed when I hit the button to save the account?
I have a late-2010 MacBook Pro running Bootcamp 4.0 with Windows 7 64-bit. My graphics card is the nVidia GeForce 320m. I looked online recently and found that there was an update available for my graphics card (previously I had the one that comes with bootcamp, which is from 2009 I believe--quite outdated you see). So I installed it, hoping for better DX11 support, etc... It installed fine, but now my display is stuck on 100% brightness, when before I could adjust it with the F1 and F2 keys. When I try using the keys it shows the Apple popup with the slider moving, but the brightness doesn't change. I went into Control Panel > Power Settings and tried adjusting it from there, with no luck. The nVidia Control Panel doesn't have any satisfactory controls to do this either. It must be, of course, that the driver update changed things, but I'm not sure how to rectify the situation. I uninstalled the Apple Driver-Display from Control Panel and then re-installed from the Bootcamp files, but it didn't help. I've heard some talk about Apple Cinema Display, but I'm not sure if that's the same thing as the Display and whether I should be looking for a driver for it.
The brightness goes up when you plug in your MBA, but then over time it just goes up and up. I honestly like my brightness pretty low (rarely more than half, typically at 3-5 notches), but it just keeps on going up and up. I almost never set it above half, but multiple times a day, I notice that it looks pretty high and it's at like 3/4 so I put it it down to about 1/3, but after a while, it's just up again.
Anyone else notice this? What is it, why does it do this? How can I fix it? I don't mind not having auto-brightness (even though I loved it), as long as my screen doesn't keep going up.
My macbook doesnt save the headphones volume, I've already saw a thread talking about it but they only sugested erasing plist files and reseting pram, done both even re-installed os x and nothing.. When I plug the headphones the volume get's set to 50% and it gets really loud
My Mum just gave me her old iPhone 4s. It doesn't have a 'software update' section under settings/general. I wanted to try to update it somehow using iTunes, but I need to update my IBook G4's iTunes first. But when I try my laptop just says it can't connect with the server. However, there's no problem with my internet connection.
I just returned my macbook air to fabric settings and put all my valuable stuff on a usb stick, everything from the usb stick works but office 201 it says that there was a problem with my installation-program of office and that i need to install it again but i don't have any disk from word just the office folder in my application folder.
So I installed Vista 64 bit on my Macbook Pro (Santa Rosa), I installed most of the drivers I can find, but I cant get the screen brightness buttons to work (F1 and F2)
I have dual ACD's. How do I make it so that both screens have the same brightness? If I adjust the brightness in the display settings it adjusts the main screen, but then not the other one. How do I make them the same?
I went to Best Buy yesterday and they just got the new imacs in and had on display side by side. The 21.5 display was not as bright and vibrant as the 27 display. The apple and best buy guys could not tell me why the difference. The settings were checked and found to be the same for both machines. I was going to get the 21.5 but now not so sure. I definitely like the brighter 27 better. Is this normal? Why is the 27 brighter? Has anyone else noticed the difference?
I have a G5 Duel 2GHz Power PC, Recently I was losing the time, date and wireless settings so I assumed as my machine is now 4 years old the PRAM battery was up for renewal.This has now been replaced but I'm still losing my settings, not all the time but randomly, sometimes I lose my wireless key sometimes I lose time and date sometimes both, this can happen daily.
I have removed the (New) Battery and checked the voltage and it reads 3.6 Volts, I haven't checked this under load though, so presuming that the battery is OK, what else could cause this.. a failing System Board?
I have had my MacBook Pro now for a little over 2 yrs and I was very frustrated I could not change any print options in any application. I know that the Triangle button expands print options screen but when I do, I have only two print choices. It gave me Standard or Page Attributes in Office and any other App it is Standard and Last used settings. I can't print in Draft, Best or other setting because it does not even give them as a choice. I have two high end color photo printers, Canon i9900 and Epson Photo series and an old HP830 series. Any app I tried to print from and the same thing. I tried to capture the options on the choices but it would not grab that part of the image but here is my screen shot. I searched many forums and I still get the same answer so something else is not letting me change things so I figured best to ask since I am a 20 year win user now switched to Mac. Well right after I posted this question, my wife found the answer. I never though to check the application NAME in the print setting screen. Example, in the screenshot I am using Preview. I never thought to hit the up/down arrow next to the Preview label and wouldn't you know, that is were the quality and several other settings were. I felt pretty stupid that it took 2 years to figure this out but if I posted the answer maybe someone else will not have to take as long as I did to change their print quality!
