Under normal office lighting, I find anything other than 100% brightness seems too dark. But I've been getting huge amounts of eye strain so am wondering whether to turn in down some more, say to 50-75%, but worried that will strain my eyes even more. What do you guys have your 13" set to, assuming good ambient lighting?
View 10 RepliesWhat setting do you use on your new MacBook Air? I'm currently at an older non-LED MacBook, and when working with the LED-screens on the newer MBPs I kept noticing that I couldn't really find a proper backlight settings. The top 3 where OK but everything was almost too bright, while lower settings made everything look very dark and greyish.
I played around with the Airs a bit in the store, and I think they were very similar in that regard. But it's hard to say because of the store lighting and not being able to use it in various situations with different lighting.
I dropped my laptop on a tile floor and the bottom hit it flat. my computer works fine besides the fact that my computer screen's brightness is as if my brightness level was all the way down.
View 4 Replies View RelatedExcluding sitting outside in the sun or in very dark rooms, what level do you usually keep your MBA brightness level at and what kind of battery life do you get? I've got mine set to about 65%, haven't used it enough to know what kind of life I get.
View 6 Replies View Relatedi keep my MPB on 1/16 brightness level in low light, and it took me more than a month to get used to. What is the highest level of brightness you can tolerate in low light conditions?
I dont want to sound too sensitive but sometimes it looks almost too bright even on min settings.
I am looking to purchase an external monitor for my unibody macbook pro, and I love the (maximum) brightness level on it, and would like the same on my external monitor. Does anyone know what the cd/m2 rating is?
View 4 Replies View Relatedi sometimes use my mbp in a dark room and find the lowest brightness setting to be to bright. is there any way to get the screen even more dim?
View 5 Replies View Relatedi got a question about adjusting the brightness level on iMac.
i adjust the brightness to lowest but each time i restart or turn the computer back on, the brightness level would set back to highest. Is that for all the imac? is there a way to set it?
I had a quick question about the screen and how it dimms at wierd times.like the screen to be on the brightest possible setting but some times it dimms to a lower level. Why is that? Does it have to do with the light in my room?
View 5 Replies View RelatedI have been experiencing a problem lately. Once a while my MBP '10 screen will have a sudden drop of brightness and then back to normal. Does anyone have similar problem?
View 7 Replies View Relateddoes keeping a high brightness level all the time effect performance or display?
Info:
iMac, Mac OS X (10.4.1), 27"/4GB/2.7GHz/intel core i5
Are the led's under the keys auto controlled due to the amount of light in the room? I use my MacBook pro on battery most of the time and every time I go to turn up the keyboard brightness its in a different place. I want to set it to be at a specific brightness when its plugged in and when its running on battery, at a lower brightness but the same every time. I want to be able to have settings for the led brightness.
View 1 Replies View RelatedSo I have noticed a few times already, that the screen on my white macbook flickers to change the brightness level. It can do this while the computer is plugged in and charging, or if it's off the charger. It is definitely noticeable as it causes me to just watch what the screen is doing.
View 13 Replies View RelatedI am calibrating my system with spyder2 and it wants me to set my brightness back to the default. What is the default setting for the brightness?
View 1 Replies View RelatedI have a new iMac 2009 - 24' - 2,93Ghz, running the latest OS.
When I start, the brightness is at maximum... I set it to minimum, only to find it at maximum again when I re-boot the computer ! I tried setting it via settings as well... it just dosent stick !
On the flip-side, the volume retains its last settings.
I have a two year old 13" mac laptop. 10.5.6 / 2 GHZ Intel core duo/2GHz667MHz. My problem is this: within the last month the brightness setting has shifted from bright to dull all by its self. Each time I move the slider up (pref. display) it moves down so that my screen is difficult see.
View 3 Replies View RelatedHere's something I've wondered on and off for a while, just remembered it now so I'll ask.
The enduring issue I've had with all of Crudbooks (well, among many other issues - but they've usually been different for all models/refreshes of Crudbooks) is the screen brightness on AC and battery. It doesn't seem to intelligently switch in the way that for example Windows does. Or to put it more specifically, it doesn't seem to remember brightness settings for AC and battery modes that well.
It is of course the matter of a few seconds to adjust the brightness but I wonder if there's a way of doing it automatically. A potentially basic question, but something I've never bothered to find the answer to. Any takers?
the monitor's default brightness setting is far too bright for my eyes, so the first thing I did was to open the System Preferences pane and reduce the brightness setting. That worked fine until I shut the computer down. On rebooting, the brightness returned to its default highest setting. On my older iMac G5, the brightness setting always stayed put. It isn't a huge problem since adjusting the brightness setting does work, but I don't want to have to adjust it every time I reboot my computer.
I spent two hours yesterday on the phone with Apple support trying to fix the problem, even going so far as to reinstall the system software with no success. The woman on the phone finally suggested that I return the Mac for a replacement.
Has anyone else here with a 2009 iMac experienced this problem? Is it possible that it's hardware related? If so, could this be the tip of the iceberg suggesting a potentially larger problem down the road? I would have guessed it might be a software glitch. (The new iMac has thrust me, finally, into Leopard; until last week I was using Tiger on my older G5.) I bought the 3-year Apple Care with it--since the new iMacs have only been out a week, should I wait until the next Leopard update and see if that fixes the problem?
I need to change the color and brightness for a video file for a presentation and cannot figure out how to change them permanently when I open the video file in Powerpoint. When I open a video which I have altered the AV settings on in another program, the settings revert to the initial settings. Can I edit the color and brightness settings permanently in Quicktime 7?
View 1 Replies View RelatedI'm not sure why, but all my MS Word documents have the generic file icon and nothing that makes me think Pages '08 is going to open that file. This goes the same for .xls documents. Even though both file types are set to open in iWork, they retain the generic blank icon.
Is this normal? Shouldn't they have Pages/Numbers icons respectively, even if they were created in Word?
All of a sudden, every time I reboot, my screen's brightness is all the way up. So, I go to 'Preferences' and bring it down to only happen again the next time I reboot. Not a terrible problem, I hope, but not sure why the settings of this doesn't remain as I left it last. Perhaps I have picked up something OR I have a fault which could get worse?Anyone seen anything like this?
View 3 Replies View RelatedI just returned my macbook air to fabric settings and put all my valuable stuff on a usb stick, everything from the usb stick works but office 201 it says that there was a problem with my installation-program of office and that i need to install it again but i don't have any disk from word just the office folder in my application folder.
Info:
MacBook Air, OS X Mavericks (10.9.4)
My wife has an iMac (I don't know any other way to identify it e.g. model number), and she has this 3rd party calibration software that I'm trying to use. I am not used to a Mac, and I cannot find the display settings for the monitor. There are no buttons on the monitor, and when I go to preferences, I can only find the brightness control. I've googled this and cannot find a clear, simple answer. I have used every version of Windows (currently on 8.1 on my PC) and it's easy for me on that platform. I suppose it's just that I don't really know how to navigate Mac OS.
Info:
iMac, Mac OS X (10.6.8)
We have OS Lion. When we click on the printer icon, All of the text is huge. If we go to file, print everything prints normally.
Info:
MS Office, Mac OS X (10.7.3)
The brightness goes up when you plug in your MBA, but then over time it just goes up and up. I honestly like my brightness pretty low (rarely more than half, typically at 3-5 notches), but it just keeps on going up and up. I almost never set it above half, but multiple times a day, I notice that it looks pretty high and it's at like 3/4 so I put it it down to about 1/3, but after a while, it's just up again.
Anyone else notice this? What is it, why does it do this? How can I fix it? I don't mind not having auto-brightness (even though I loved it), as long as my screen doesn't keep going up.
I run 4 different screen profiles depending on whether I'm at home or work both day and night. Does anyone else use multiple color profiles depending on where you're computer is?
View 3 Replies View RelatedI was just showing my son, my new MacBook Pro and he came up with a brilliant idea. He said, wouldn't be cool if you could change the colour of the keyboard backlight, and even added that it could be done with voice control. How cool would that be Anyone know of any mods that have been done with this in mind?
View 10 Replies View RelatedSo I spilled orange juice on my 2.26ghz mid 2009 Macbook pro keyboard. I turned it off right away unplugged it and turned it upside down. I took the back off and cleaned and dried it all out. after letting it dry for a while I turned it on and everything seems to be working normally apart from a few sticky keys which I'm slowly taking off and cleaning and the facet that the keyboard lighting is no longer consistent. So my question is How does the keyboard lighting work exactly and how might I go about fixing it? here are some photos so you can see what exactly is going on.
View 7 Replies View RelatedJust did a clean install of OS X on my Air. The keyboard backlighting does not work--when I try to adjust with the F5/F6 keys I just get the circle with the little line through it, and even in a pitch dark room the keyboard does not light up whatsoever.
In system preferences I have the "Illuminate keyboard in low light conditions" box checked and have the slider to "never
Is there a way to switch off the Keyboard Backlighting on a Macbook pro only when it is on battery power?I have been through the energy saver settings and it appears that the settings apply to both power and battery.
Info:
MacBook Pro, Mac OS X (10.7.4), 13 inch 2.4Ghz Core i5 4 GB RM
