My macbook doesnt save the headphones volume, I've already saw a thread talking about it but they only sugested erasing plist files and reseting pram, done both even re-installed os x and nothing.. When I plug the headphones the volume get's set to 50% and it gets really loud
View 2 RepliesI'm not sure if this is just me or if everyone experiences this but I usually shut down my computer when I'm not using it for long periods of time. When I boot up my computer it will remember the settings I have for the internal speaker but when I plug in my headphones it always goes to 3/4 volume which is way too loud for me. Is there a way I can get it to remember my headphone settings too?
View 7 Replies View RelatedThe sound is not working. The volume in the settings is stuck and won't move.
Info:
MacBook Pro, Mac OS X (10.6.8)
Besides files, does time machine save settings as well?
View 2 Replies View RelatedThe volume is muted, but I can't un-mute it because I am unable to click on any of the sound options because they are all "grayed out". The little box next to mute is checked and I cannot un-check it because it's grayed out. Nothing works when I plug in headphones or speakers or anything, and there is no red light glowing where you plug the headphones or speakers in.
View 5 Replies View RelatedEvery so often I have iTunes tell me that it can't save because the volume has changed. In /volumes I see that I have Drobo, Drobo 1, Drobo 2, Drobo 3, Drobo 4, Drobo 5. How can I not have my computer create more of these alias that cause me issues. This also gives me issues with Final Cut Express.
View 2 Replies View Relatedsnow leopard likes to my volume setting and always defaults to the middle setting with each startup. is there a way to keep my setting?
View 2 Replies View RelatedDoes anybody know if the WinXP - Boot Camp - Cirrus Audio issue has been resolved? My new MBP has WinXP Home Ed installed. Initial problem was that the volume was very low even with max setting. There was also a 'red light' coming out of the audio jack like a laser pointing device. After some searching in forums, i found a fix wherein i manually changed the Cirrus driver setting (turning off the optics and re-calibrating the volume limit). However, this seems to be a short-term solution only, because there is still a faint crackling sound emanating from my internal speakers whenever i'm running Windows in BC. I'm running SL 10.6.
View 2 Replies View RelatedWhen I boot up my mac the volume settings are not preserved. The volume is always set to 50% of the max volume when I boot up. I've run repair permissions and Onyx, but this did fix anything. Is it time to reinstall Snow Leopard? I am hoping my time machine backup doesn't remember these obscure settings or problem files.
View 1 Replies View Relatedwhenever i restart or reopen my macbook after shutting it down, the previously opened background shows up...nt the changed one..anyone with any sol...????
Info:
MacBook
Pro, Mac OS X (10.7.3)
Upgraded a friend to Snow Leopard the other day. All was fine except that mail was taking 20-30 seconds to send mail. Finally isolated it to a router setting of some kind, as plugging directly to the modem resolved the issue. (The computer having trouble sending mail is actually a hard-wired desktop) However, when I plugged the router back in to set it up again and start troubleshooting, it would not save any changes. So logging into the router at 192.168.1.1 from the wired desktop, changing any settings, and pressing 'save' just brings up an 'unable to load page' Safari prompt.
Has anybody run into this issue after ugrading to SL? (or to Leopard, for that matter?)
I believe it's a Linksys WRT54g wireless router.
Say I go into System Pref.>Energy Saver Prefs.....
I'll customize I want optimal battery life when my Mac is running under only the battery...but it doesn't save it.
As of right now my the Energy System Pref. doesn't have any settings at all. It's just..
my mbp i7's double tap doesn't save when i set it to a certain "double-click speed" so when i put my mbp to sleep or restart it, i'm forced to go back to the settings and set my double-click speed again. The point of me doing this is because for some reason, my double-click doesnt register or hi-light the text in the URL or text in essays etc. when its set up to the fourth notch on the slide bar. so i have to put it down to 0 on the bar in order for my double tap to register. Its really annoying to have to redo this every time i come back to my mbp.
View 1 Replies View RelatedI just returned my macbook air to fabric settings and put all my valuable stuff on a usb stick, everything from the usb stick works but office 201 it says that there was a problem with my installation-program of office and that i need to install it again but i don't have any disk from word just the office folder in my application folder.
Info:
MacBook Air, OS X Mavericks (10.9.4)
the monitor's default brightness setting is far too bright for my eyes, so the first thing I did was to open the System Preferences pane and reduce the brightness setting. That worked fine until I shut the computer down. On rebooting, the brightness returned to its default highest setting. On my older iMac G5, the brightness setting always stayed put. It isn't a huge problem since adjusting the brightness setting does work, but I don't want to have to adjust it every time I reboot my computer.
I spent two hours yesterday on the phone with Apple support trying to fix the problem, even going so far as to reinstall the system software with no success. The woman on the phone finally suggested that I return the Mac for a replacement.
Has anyone else here with a 2009 iMac experienced this problem? Is it possible that it's hardware related? If so, could this be the tip of the iceberg suggesting a potentially larger problem down the road? I would have guessed it might be a software glitch. (The new iMac has thrust me, finally, into Leopard; until last week I was using Tiger on my older G5.) I bought the 3-year Apple Care with it--since the new iMacs have only been out a week, should I wait until the next Leopard update and see if that fixes the problem?
I am creating complex titles in FCE using the lower-third feature. How do I save these settings to use the exact same ones later? I don't want to start over and may not remember exactly what they were. They need to match through the video. It seems that I have done this before but can't remember and of course nothing in the documentation.
Info:
iMac (24-inch Early 2009), OS X Mountain Lion (10.8.5)
Today I tried to watch a video on my computer, and there was no sound. So I clicked the volume up button, and it doesn't change the level (there's a small "no" sign, the circle with the line through it, under where the volume level should be). In the menu bar, the volume control is now a light grey and I can't use it. Same with in system preferences. Any ideas on how to get volume to start working again or why it stopped?
View 9 Replies View RelatedI got a HP Photosmart C4380 all-in-one wi-fi printer and i want to set it up on my wireless network. so i plugged it in to my MBP via USB and ran the HP setup assistant that came with the printer.
at the first step it recognized my printer as being connected via USB the next step when its supposed to detect your wireless network i get this message that says your printer is not connected to the computer, connect via USB to save settings.
I work for a University and the school bought me an iMac in January. Before giving it to me they had a username and password put on it so that only I could access it. I took it home for the summer and realized that the login info would only work on the school's network. To get around this I erased the account by holding down "command +S" during startup. It solved the problem and I was able to login and use the computer however now it says iTunes cannot be located and therefore cannot be used and when I use Safari it will not save any of the settings changes like changed startup pages etc. I reinstalled Lion by pressing "command + R" during startup but still encounter the same problem. how to completely erase everything and go back to factory settings?
Info:
iMac, Mac OS X (10.7.3)
All of a sudden, every time I reboot, my screen's brightness is all the way up. So, I go to 'Preferences' and bring it down to only happen again the next time I reboot. Not a terrible problem, I hope, but not sure why the settings of this doesn't remain as I left it last. Perhaps I have picked up something OR I have a fault which could get worse?Anyone seen anything like this?
View 3 Replies View RelatedI recently formatted one of my external hard drive to use with Time Machine and I get this error message. The drive is the Seagate on the right.
View 2 Replies View RelatedI used to be able to surf the web wirelessly on my Macbook laptop over my home network with no issues. I have Verizon FIOS router. Now, every time I try to run Safari I have to re-select my home router and type in the WEP password, every single time. I tell it to save the password to my keychain and it just doesn't remember my previous connections
View 3 Replies View Relatedi'm having this minor but annoying problem with Firefox. every now any then when I move my mouse over the volume button while I'm watching a Youtube video in order to get the volume bar to pop up, nothing happens. if i click repeatedly on the button and go crazy it will pop up, but it will not let me slide the volume bar up and down. i don't remember having this problem with Safari. it's sort of like the browser isn't recognizing my mouse cursor hovering over the volume area in order for it to trigger the bar to pop up, if that makes any sense.
View 3 Replies View RelatedI'm moving from a MacBook Pro running 10.6.8 to a MBP running 10.7.5. I thought this would be pretty simple ... just attach my Snow Leopard Time Machine external drive to the Lion MBP and run Migration Assistant.
But when I go through the MA steps, MA does not see my TM drive. I've made sure I have the latest upgrades and have run Disk Utility's First Aid on the TM drive.
Ideas? I know I can try MA with other interfaces but using TM allows me to work on my old computer until my new one is ready.
The TM drive is a 500GB Iomega eGo drive.
Info:
Mac OS X (10.6.8)
I bought my first MacBook three weeks ago and was using Firefox for the first two but then I decided to switch to Safari. I love it but I have a couple of questions/problems. I did google it but found mixed responses.1) Safari sometimes doesn't save passwords, even does't ask me if I'd like to.It shows every time I launch Safari. I'm deleted Saft (used AppTrap) but looks like there are sill some files left.
View 7 Replies View RelatedHere's something I've wondered on and off for a while, just remembered it now so I'll ask.
The enduring issue I've had with all of Crudbooks (well, among many other issues - but they've usually been different for all models/refreshes of Crudbooks) is the screen brightness on AC and battery. It doesn't seem to intelligently switch in the way that for example Windows does. Or to put it more specifically, it doesn't seem to remember brightness settings for AC and battery modes that well.
It is of course the matter of a few seconds to adjust the brightness but I wonder if there's a way of doing it automatically. A potentially basic question, but something I've never bothered to find the answer to. Any takers?
I just can't understand this after doing a thorough through many forums. But when I open Applescript and try to save a script in the "Save As" window, it rejects any filename I give it. I copied and pasted an Apple script for toggling my sound output from Line Out to Headphones. So when I chose "Headphones" as the file name in the "Save As" window I keep getting this error message: "The document "Untitled" could not be saved as "Headphones". But it doesn't matter what name I give the applescript file, I keep getting this: The document "Untitled" could not be saved as "............"
View 2 Replies View RelatedI have upgraded from Snow Leopard to Maverick and now all the old files I had saved in my external HD cannot be modified.
I can open them, for example in photohop CS6, but cannot save them or modify cause apparently "have no permission".
I went to Get Info and change the permissions to Write & Read for all the users available + admin but still no joy.
Someone suggested to use disk Utility to repair the permissions but the option is greyed out when I select the WD...
Why doesn't safari history save google searches in OS 10.6.8 or Lion? It records image searches but not the google search unless you use the google search on the bar and not in the window.
Info:
iMac, OS 10.6
My Mum just gave me her old iPhone 4s. It doesn't have a 'software update' section under settings/general. I wanted to try to update it somehow using iTunes, but I need to update my IBook G4's iTunes first. But when I try my laptop just says it can't connect with the server. However, there's no problem with my internet connection.
Info:
iBook, Mac OS X (10.4.3)
