MacBook Air :: Brightness Settings With Different Lighting Situations
Nov 16, 2010
What setting do you use on your new MacBook Air? I'm currently at an older non-LED MacBook, and when working with the LED-screens on the newer MBPs I kept noticing that I couldn't really find a proper backlight settings. The top 3 where OK but everything was almost too bright, while lower settings made everything look very dark and greyish.
I played around with the Airs a bit in the store, and I think they were very similar in that regard. But it's hard to say because of the store lighting and not being able to use it in various situations with different lighting.
View 11 Replies
ADVERTISEMENT
Jul 29, 2010
Under normal office lighting, I find anything other than 100% brightness seems too dark. But I've been getting huge amounts of eye strain so am wondering whether to turn in down some more, say to 50-75%, but worried that will strain my eyes even more. What do you guys have your 13" set to, assuming good ambient lighting?
View 10 Replies
View Related
Jul 6, 2010
Are the led's under the keys auto controlled due to the amount of light in the room? I use my MacBook pro on battery most of the time and every time I go to turn up the keyboard brightness its in a different place. I want to set it to be at a specific brightness when its plugged in and when its running on battery, at a lower brightness but the same every time. I want to be able to have settings for the led brightness.
View 1 Replies
View Related
Oct 19, 2010
I am calibrating my system with spyder2 and it wants me to set my brightness back to the default. What is the default setting for the brightness?
View 1 Replies
View Related
Apr 20, 2009
I have a new iMac 2009 - 24' - 2,93Ghz, running the latest OS.
When I start, the brightness is at maximum... I set it to minimum, only to find it at maximum again when I re-boot the computer ! I tried setting it via settings as well... it just dosent stick !
On the flip-side, the volume retains its last settings.
View 3 Replies
View Related
Apr 21, 2009
I have a two year old 13" mac laptop. 10.5.6 / 2 GHZ Intel core duo/2GHz667MHz. My problem is this: within the last month the brightness setting has shifted from bright to dull all by its self. Each time I move the slider up (pref. display) it moves down so that my screen is difficult see.
View 3 Replies
View Related
Apr 8, 2009
Here's something I've wondered on and off for a while, just remembered it now so I'll ask.
The enduring issue I've had with all of Crudbooks (well, among many other issues - but they've usually been different for all models/refreshes of Crudbooks) is the screen brightness on AC and battery. It doesn't seem to intelligently switch in the way that for example Windows does. Or to put it more specifically, it doesn't seem to remember brightness settings for AC and battery modes that well.
It is of course the matter of a few seconds to adjust the brightness but I wonder if there's a way of doing it automatically. A potentially basic question, but something I've never bothered to find the answer to. Any takers?
View 4 Replies
View Related
Mar 11, 2009
the monitor's default brightness setting is far too bright for my eyes, so the first thing I did was to open the System Preferences pane and reduce the brightness setting. That worked fine until I shut the computer down. On rebooting, the brightness returned to its default highest setting. On my older iMac G5, the brightness setting always stayed put. It isn't a huge problem since adjusting the brightness setting does work, but I don't want to have to adjust it every time I reboot my computer.
I spent two hours yesterday on the phone with Apple support trying to fix the problem, even going so far as to reinstall the system software with no success. The woman on the phone finally suggested that I return the Mac for a replacement.
Has anyone else here with a 2009 iMac experienced this problem? Is it possible that it's hardware related? If so, could this be the tip of the iceberg suggesting a potentially larger problem down the road? I would have guessed it might be a software glitch. (The new iMac has thrust me, finally, into Leopard; until last week I was using Tiger on my older G5.) I bought the 3-year Apple Care with it--since the new iMacs have only been out a week, should I wait until the next Leopard update and see if that fixes the problem?
View 16 Replies
View Related
Mar 20, 2012
I need to change the color and brightness for a video file for a presentation and cannot figure out how to change them permanently when I open the video file in Powerpoint. When I open a video which I have altered the AV settings on in another program, the settings revert to the initial settings. Can I edit the color and brightness settings permanently in Quicktime 7?
View 1 Replies
View Related
Jul 23, 2010
All of a sudden, every time I reboot, my screen's brightness is all the way up. So, I go to 'Preferences' and bring it down to only happen again the next time I reboot. Not a terrible problem, I hope, but not sure why the settings of this doesn't remain as I left it last. Perhaps I have picked up something OR I have a fault which could get worse?Anyone seen anything like this?
View 3 Replies
View Related
Nov 2, 2010
just a problem that i hope is easily fixable! this has been happening for a while now but it's only just started to annoy me now that i've realised a whole website won't work with it (beatport.com)
basically when i two finger scroll with safari it works almost all the time, but when my mouse if on top if certain things, usually flash animations and the sort, it just doesn't work. embedded videos are normally the culprits, but like i said earlier a whole website that seems to be mostly flash based, beatport.com if you'd like to test yourself, just won't work at all unless i put my pointer right around the edge of the web page.
is this a known problem that i'm going to have to deal with? if not, does anyone know of a fix? i presume it's software based so hopefully an easy(ish) fix!
View 2 Replies
View Related
Nov 30, 2014
My wife has an iMac (I don't know any other way to identify it e.g. model number), and she has this 3rd party calibration software that I'm trying to use. I am not used to a Mac, and I cannot find the display settings for the monitor. There are no buttons on the monitor, and when I go to preferences, I can only find the brightness control. I've googled this and cannot find a clear, simple answer. I have used every version of Windows (currently on 8.1 on my PC) and it's easy for me on that platform. I suppose it's just that I don't really know how to navigate Mac OS.
Info:
iMac, Mac OS X (10.6.8)
View 3 Replies
View Related
Nov 15, 2010
The brightness goes up when you plug in your MBA, but then over time it just goes up and up. I honestly like my brightness pretty low (rarely more than half, typically at 3-5 notches), but it just keeps on going up and up. I almost never set it above half, but multiple times a day, I notice that it looks pretty high and it's at like 3/4 so I put it it down to about 1/3, but after a while, it's just up again.
Anyone else notice this? What is it, why does it do this? How can I fix it? I don't mind not having auto-brightness (even though I loved it), as long as my screen doesn't keep going up.
View 1 Replies
View Related
Jul 4, 2009
I run 4 different screen profiles depending on whether I'm at home or work both day and night. Does anyone else use multiple color profiles depending on where you're computer is?
View 3 Replies
View Related
Jul 12, 2007
I was just showing my son, my new MacBook Pro and he came up with a brilliant idea. He said, wouldn't be cool if you could change the colour of the keyboard backlight, and even added that it could be done with voice control. How cool would that be Anyone know of any mods that have been done with this in mind?
View 10 Replies
View Related
Dec 21, 2009
So I spilled orange juice on my 2.26ghz mid 2009 Macbook pro keyboard. I turned it off right away unplugged it and turned it upside down. I took the back off and cleaned and dried it all out. after letting it dry for a while I turned it on and everything seems to be working normally apart from a few sticky keys which I'm slowly taking off and cleaning and the facet that the keyboard lighting is no longer consistent. So my question is How does the keyboard lighting work exactly and how might I go about fixing it? here are some photos so you can see what exactly is going on.
View 7 Replies
View Related
May 18, 2009
Just did a clean install of OS X on my Air. The keyboard backlighting does not work--when I try to adjust with the F5/F6 keys I just get the circle with the little line through it, and even in a pitch dark room the keyboard does not light up whatsoever.
In system preferences I have the "Illuminate keyboard in low light conditions" box checked and have the slider to "never
View 15 Replies
View Related
Jul 2, 2012
Is there a way to switch off the Keyboard Backlighting on a Macbook pro only when it is on battery power?I have been through the energy saver settings and it appears that the settings apply to both power and battery.
Info:
MacBook Pro, Mac OS X (10.7.4), 13 inch 2.4Ghz Core i5 4 GB RM
View 1 Replies
View Related
Sep 18, 2007
dmx lighting control using a Mac? I'm interested in software, and of course some sort of interface (USB?) that will produce DMX signals. A search on the web reveals several 'older' Mac programs -
View 9 Replies
View Related
Nov 21, 2009
When trawling through the ridiculously long thread showing pictures of peoples Mac setups, I noticed an awful lot of ambient lighting and want to try a little myself. It's a painfully wanky thing to do, but with the iMac in the living room there just isn't any room for an ordinary lamp so a blue LED could look stunning.
What do people use for ambient lighting? It seems to be that, with USB ports being in fairly good supply behind the iMac it would be criminal not to go with something USB powered.
I found this: [URL]
Looks like it might do the trick, and even comes with a suction cup which *might* attach to the back of the iMac or the stand. The same light is also available in white, red, green or a colour changing version, but I'm convinced blue is best.
View 7 Replies
View Related
Sep 2, 2009
Since as long as I can remember, my August 2007 aluminium iMac always wakes up as soon as I turn my lamp on or off. Maybe, one in seven nights it won't wake, but most of the time it does.
It's a real nuisance having it do this, and to add to the annoyance, the iMac randomly wakes up sometimes, day or night. I can be in bed and it will just come on, all systems go, or get in from work one day and find it's been on since 10AM that morning (wasting energy).
I've reset PRAM and SMC (whatever they're called) about a thousand times, I clean installed Leopard 3-4 times and just did a clean install with Snow Leopard (I didn't upgrade, I wiped my HD and installed fresh) yet it still happens.
It's totally beyond me why it just decided to wake itself up every now and again and also why 90% of the time it decides to wake up when the lighting conditions change
View 3 Replies
View Related
Sep 2, 2006
well i'm interested in lighting design, but dont have a clue on what programs/apps would be good for this kind of stuff.
View 4 Replies
View Related
Mar 12, 2010
Keyboard back-lighting will not turn off - I press the f5 key and it will only let me turn it down to no-bars, however the led lights are still on. How can I turn them off completely and keep them from turning on automatically?
View 2 Replies
View Related
Jan 1, 2011
I've got myself a 2.66GHz Intel Core 2 Duo Macbook Pro 15" and I'm curious about the keyboard lighting. It appears that the keyboard should light up when the lighting conditions require it (eg it gets dark) but it doesn't appear to be that way.. and if I turn it on manually, the keyboard stays lit up even in direct sunlight.
View 1 Replies
View Related
Jun 20, 2009
So I installed Vista 64 bit on my Macbook Pro (Santa Rosa), I installed most of the drivers I can find, but I cant get the screen brightness buttons to work (F1 and F2)
View 2 Replies
View Related
Feb 17, 2008
I have dual ACD's. How do I make it so that both screens have the same brightness? If I adjust the brightness in the display settings it adjusts the main screen, but then not the other one. How do I make them the same?
View 1 Replies
View Related
Jun 26, 2010
I have had my MacBook Pro now for a little over 2 yrs and I was very frustrated I could not change any print options in any application. I know that the Triangle button expands print options screen but when I do, I have only two print choices. It gave me Standard or Page Attributes in Office and any other App it is Standard and Last used settings. I can't print in Draft, Best or other setting because it does not even give them as a choice. I have two high end color photo printers, Canon i9900 and Epson Photo series and an old HP830 series. Any app I tried to print from and the same thing. I tried to capture the options on the choices but it would not grab that part of the image but here is my screen shot. I searched many forums and I still get the same answer so something else is not letting me change things so I figured best to ask since I am a 20 year win user now switched to Mac. Well right after I posted this question, my wife found the answer. I never though to check the application NAME in the print setting screen. Example, in the screenshot I am using Preview. I never thought to hit the up/down arrow next to the Preview label and wouldn't you know, that is were the quality and several other settings were. I felt pretty stupid that it took 2 years to figure this out but if I posted the answer maybe someone else will not have to take as long as I did to change their print quality!
View 1 Replies
View Related
Aug 1, 2010
I went to Best Buy yesterday and they just got the new imacs in and had on display side by side. The 21.5 display was not as bright and vibrant as the 27 display. The apple and best buy guys could not tell me why the difference. The settings were checked and found to be the same for both machines. I was going to get the 21.5 but now not so sure. I definitely like the brighter 27 better. Is this normal? Why is the 27 brighter? Has anyone else noticed the difference?
View 6 Replies
View Related
Nov 28, 2010
I have the 21" iMac and need to brighten the screen. How do I do this?
View 2 Replies
View Related
Aug 23, 2009
I have a G5 Duel 2GHz Power PC, Recently I was losing the time, date and wireless settings so I assumed as my machine is now 4 years old the PRAM battery was up for renewal.This has now been replaced but I'm still losing my settings, not all the time but randomly, sometimes I lose my wireless key sometimes I lose time and date sometimes both, this can happen daily.
I have removed the (New) Battery and checked the voltage and it reads 3.6 Volts, I haven't checked this under load though, so presuming that the battery is OK, what else could cause this.. a failing System Board?
View 4 Replies
View Related
