I recently purchased a set of Logitech Z-5500 speakers. I have the proper optical cable, and all my speakers are set up properly. For whatever reason, I can't get 5.1 to output from my Macbook Pro when using iTunes.
Audio MIDI Setup is currently set to 44100.0 Hz 2ch-32bit digital output. I can't change it to 5 channel. (I don't know anyone who has to, anyway.)
I'm looking at getting a MacBook Pro, and hooking it up to my Dell monitor and Logitech speakers when at home. Both the SP/DIF and coax connection on the speakers are free right now, so I need to know what cable I'd have to buy to connect the MacBook Pro to either of these 2 connections? I asked the online chat section of the Apple website, to which they replied they had no such cable, and proceeded to cut me off rather than providing a solution - doesn't exactly fill you with much confidence when buying into a premium product!
Can someone let me know what cable it is I require? It must be capable of producing 5.1 sound on the speakers.
For some reason, I can't get Logic Express 8 to output audio to my Mac's attached speakers. It outputs fine through my M-Audio interface, though, but I'd just like to listen without headphones.
I am streaming iTunes to another room using an Audioengine AW1 (over usb, not the analog input) and it works fine. Looking at JACK audio, Soundflower or Apple's AudioMIDI utility, I feel I should be able to use one or a combination of these resources to output iTunes to both the AW1 and my desktop's headphone port. Unfortunately, I can't seem to perform both. Well, technically I can in using a "y" audio cable to output from the Mac headphone port to headphones and to the analog-in on the AW1's, but that really doesn't work adequately. The output volumes are considerably lower and tied together. I am looking to figure out how to add a usb audio device as another, and simultaneous output.
View 3 Replies View Relatedi'm using my mac mini with the ACD 24" and i get the sound from the screen because it is "very slightly bettter" than the speaker of the mac mini (even if both are quite disappointing)
when i connected external speakers on the jack of the mini, it is simply impossible even with the soft soundsource to switch audio outputs on the fly
external speakers seem to have the priority over other outputs
is there a way to get through it ?
I usually listen to any output from my iMac (Intel Core 2 Duo 3.06GHz, 27", early 2010) through an external amp and speakers, via the analog output (headphone socket). However - I recently disconnected the jack plug to listen through the machine's internal speakers but was greeted with silence. I checked the volume via the kb controls - the mini display appeared on screen suggesting that the volume was set on full, though I could not adjust it at all. I reconnected the jack plug and sound came out from my external speakers as usual. On disconnection, no volume. I searched the forums for ideas, and came across this support article: [url],,, which I followed to the letter.
When I open 'Sounds' in System Preferences, the only output option available to me is 'Digital Out' - there is no option for internal speakers or headphones. However, if I plug in the line-out jack, the options change - only 'Headphones' is available (no 'Digital Out' any more). Following the article, I checked to see if there was a red light in the digital output socket, which there is not.
Info:iMac, Mac OS X (10.6.8)
I've recently started using headphones more and more and something that really bothers me is that I can't change the output source to the Mac's speakers unless I unplug the headphones entirely. Is there a way to do this without unplugging the headphones? I've looked through Audio MIDI Setup Utility as well as the Sound system preferences but found nothing.
View 2 Replies View RelatedA headphone jack got stuck in my macbook pro as it fell down in a plane going thru turbulences (lucky me!).So that now it thinks there are headphones connected while there is nothing...I wont be anywhere near an apple store for the next month so I was just wondering if it was possible to force the use of the internal speakers over the output jack?
View 6 Replies View RelatedMy MacBook Pro seems stuck on digital output thus no sound from speakers. Headphones recognized and work but internal speakers don't revert to default or even show up as a sound option in System Preferences. Any way to get internal speakers back? Restarting computer did not do it.
Info:
MacBook Pro, Mac OS X (10.5.8)
I have owned my MacBook Pro since June 2010, and have always used a pair of independently powered (via adapter) external Dell speakers for audio output. Since upgrading to Lion about 1 month ago, I was having intermittent audio issues, which were resolved by re-starting my computer (not ideal but it worked). Today, the speakers just stopped working. The internal speakers work, but when I plug the externals into the headphone port, they don't produce sound. Earbuds in the same port also don't work (I know the earbuds are good). The external speakers are being recognized by the sound panel in system preferences.
Info:
MacBook Pro, Mac OS X (10.7.4)
everytime i unplug computer from wall outlet after a storm,,,,the external speakers wont work when i reboot...so i went to the sound on preference and the output channel will only list headphones and no option for external speakers.
Info:
Mac OS X (10.4.11), mini mac
For some reason, I can't get Logic Express 8 to output audio to my Mac's attached speakers. It outputs fine through my M-Audio interface, though, but I'd just like to listen without headphones.
View 4 Replies View RelatedThe sound output in my Macbook Pro has been going in and out now for a number of months. And yesterday it finally got stuck on "Digital Output" meaning when I take out headphones from the jack, the internal speakers do not work. I am planning on taking it in and wanted to know, since I am still under warranty will Apple repair it, or give me a new one?
View 1 Replies View RelatedI feel like I once had a PrefPane for this problem but just am having a hard time searching for it. Currently I have my heaphones jack Line-In routed to my AV Receiver for iTunes music in my room, but whenever I am YouTubing or other stuff while listening to music the System Sounds come out of my Loudspeakers too. I am interested in routing only the iTunes audio through the headphone jack, and everything else to run through my iMac's internal speakers (2007 iMac AL).I saw the SoundFlower thing out there but didn't think that was the ticket
View 1 Replies View RelatedThe speakers on my Macbook have suddenly stopped working. If you plug headphones in, fine. In the system preferences, 'built in speakers' are no longer an option for audio output. Just 'digital out'. When I try and change the volume of the speakers, the symbol is greyed out, and there's a little "you can't do this" symbol.
I have a Macbook black 2.0ghz with 10.5.8
A headphone jack got stuck in my macbook pro as it fell down in a plane going thru turbulences (lucky me!).So that now it thinks there are headphones connected while there is nothing...I wont be anywhere near an apple store for the next month so I was just wondering if it was possible to force the use of the internal speakers over the output jack?
View 1 Replies View Relatedi can't get macbookpro 2010 to recognize internal speakers and audio output. only optical OUTPUT. CAN'T GET ANY SOUND EXCEPT FOR OPTICAL PORT
Info:
macbook pro 15" 2.33Ghz, 3GB RAM, 120HD/1TB Ext. Drive, Mac OS X (10.5.6), Final Cut Express 4.0.2/Sony HDR-SR11
Speakers work but cannot get any sound output. Running windows 7 on Intel iMac. Speakers sound on booting and graphics in Control panel and on toolbar indicate sound is being recieved but nothing comes out of speakers or headphones.
Info:
iMac, Mac OS X (10.6.2)
Can't access external headphone or external speakers. Choice disappeared on output, still there for input.
Info:
iMac, Mac OS X (10.7.3)
Returned home this evening to hear my iMac fan making lots of noise, upon checking it was the HDD fan that was operating at 5500rpm. Both other fans were normal. Ambient temperature was 23c and HDD temp was 36c. Normally it's almost silent. It's a late 2009 21.5" base model that has never had an issue in the 23 months that I have owned it. Any idea what the problem is has it gone bad? I restarted but the problem remained I had to shut down and restart to get it back to normal. On another note how do you clean off the dark grey blotchy marks that have appeared at the top of the screen. They don't appear to be on the glass. They started in each corner now they span entire screen top.
Info:
iMac (21.5-inch Late 2009), Mac OS X (10.7.3)
I have iTunes 10.6.1 (7) an Airport Extream Version 6.0 Airport Utility (600.92) That I use with two airport express stations, an Apple TV 2nd Generation with latest software up date. Also have Ipad 3rd Generation and two I phone 4's. Issue: After installing the latest Airport Utility software update I'm unable to connect to my remote speakers in iTunes.  The speakers are visible in the pop up menu but iTunes times out when trying to connect. If I use remote to select Apple TV and then via Apple TV select my Computers Library I'm able to play music on the Apple TV / Home Speakers... but still not the Airport Express Stations.Â
When using remote on the iPhone or iPad the speakers are visible as well but I'm unable to select them... iTunes times out. I can steam music from that is on my iPhone or iPad to each individual speaker, but multiple speaker control is not available and the music from my library is not available. I believe the problem is in the Airplay feature of iTunes and I believe the problems arise when you install the latest version of Airport Utility.   You can play on remote speakers, only one at a time, and only if you have the music on a stand alone device (iPhone or iPad)... in summary, bypass iTunes and you can be successful... marginally successful.
My sound keeps turning off. When I check the settings, the output device switches randomly between Internal and Digital output. I have no idea where the Digitial Output is coming from and this started about a month again. It switches randomly and then I loose all sound for a few seconds. Sometimes it happens once then stops for a few days, other times it switches back and forth for 5 min. No idea!!!Â
Info:
MacBook, Mac OS X (10.6.8)
I use an external monitor with my macbook, it's a couple of years old 17" Sony TFT. I connect it to the macbook through a DVI cable into the adaptor, into the mini DVI port on the mac. About 90% of the time I do this, the second display shows the correct graphics but is tinted fluorescent green, however if I play aorund enough with the connection, it goes back to full colours. Is this something a genius could fix, or do you have any recommendations about what to do?
View 8 Replies View RelatedAfter I pulled out the jack for my speakers the volume icon was greyed out [URL]and soon I realized that internal speakers as such have been disabled from the system [URL]When I restart the startup chime is played as usual.Is it a hardware or software thing?
View 3 Replies View RelatedMy new 25" HP 2510i monitor arrived today, all is good except from the speaker system, I can either have the iMac's built in speakers used or the built in monitor speakers used. Is it possible to combine them both and use both?
The monitor's audio interface connects to my iMac via the headphone jack on the back of the system.
This may or may not be a stupid proposition, but here it goes: I have a Klipsch Promedia GMX 2.1a speaker system which I like very much. However, I was wondering if I could replace the existing satellite speakers with bookshelf speakers (like Klipsch RB-10 s). I'm hoping this will work because I want to increase the audio output of my system without spending money on an amplifier.
View 3 Replies View RelatedMacBook Pro 2.16
10.4.11
Situation: no sound out from speakers in admin and user account and newly created account. Headphones work, startup chimes work on speakers.
Go to Sound in Preferences and only shows Digital Out for output. Should show Internal Speakers. Ran Diskwarrior and Applejack and zapped pram. Took mac apart and confirmed speakers wired correctly which is verified by the start up chimes being audible on the internal speakers. tested all accounts and created new account all with the same results. Did search of Google and MacRumor. Found one unaswered post indicating same problem. Had same problem with another macbook pro, ran same steps, take apart, confirm wiring setup, Diskwarriored, applejacked and zapped pram and it fixed the problem. I'm not sure what else to try. Did check Audio Midi Setup util and it also did not see the internal speakers.
I have a white Macbook, Intel Core Duo 2, 2 Gb Ram. (October 2008) Under Leopard, my volume (audio output is a shame); under bootcamp with Windows XP on the hard drive, volume is almost double: is there any work around on this?
View 3 Replies View Relatedthe external speakers (and the earphones) I use for my i-mac suddenly stopped playing sound from my imac. They do work though when I plug them to the i-pod. My imac speakers work perfectly. Any ideas what's happening?
View 1 Replies View RelatedMacPro 8 core Nvidia 8800, RAID card - arrived 2/25. Tried second monitor; monitor is blank (and turned on, and says "digital signal" when unplugging display connector from the machine, so it's recognizing the connection, monitor is fine on old G5). RMA'd for a new 8800, rec'd that on 2/28 - same result, so it's probably not the card. Tried 8800 card in different slots, so probably not a slot. Ram lights flash, HD spins, power light is on, so likely not power supply. Motherboard or RAM is only other thing I can think of, or maybe some kind of incompatibility with the 8800. Also, the fans on both 8800's run at what seems like full power when turning the machine on - is that typical for the 8800? Maybe that's a symptom of the problem; it's a lot louder than I would prefer.
View 2 Replies View Related