the external speakers (and the earphones) I use for my i-mac suddenly stopped playing sound from my imac. They do work though when I plug them to the i-pod. My imac speakers work perfectly. Any ideas what's happening?
View 1 RepliesMy new 25" HP 2510i monitor arrived today, all is good except from the speaker system, I can either have the iMac's built in speakers used or the built in monitor speakers used. Is it possible to combine them both and use both?
The monitor's audio interface connects to my iMac via the headphone jack on the back of the system.
Am i the only one experiencing a delay ex. when listening to music i plug in my earphones and it takes like 5=8 seconds for my macbook air to change from the speakers to earphones. Why?
View 1 Replies View RelatedI have Harmon Kardon speakers with a subwoofer that I used on my old PC; it used a Soundblaster card. Can I use the system on the iMac? If so, how?
View 7 Replies View Relatedi just installed vista home premium. everything seems to work fine except for my internal speakers it says that they are installed but they don't work. the name that shows up is high definition audio device.
View 1 Replies View RelatedAfter re-arranging my set-up, I suddenly have no sound from my external speakers (JBL Creature II). After the first panic, I figured I would try with my MBP. Odly, they work just fine with that. Then i tried with my headphones from my iPhone - no sound at alle. I?ve resetted PR-RAM (twice), and is now stocked - and pissed.
View 8 Replies View RelatedI have just bought the Acoustic Energy Aego sat/sub speakers for my 24" iMac...and excellent they are too. A huge improvement on the built in speakers. However, I occasionally get an electronic 'pop' or crackle from the satellites. Only happens occasionally. If I plug the speakers in to my iPod (2nd gen) all is perfect, so I assume the iMac is picking up interference from the mains or network and passing it on. I assume my options are to try a better gangway adapter (or UPS) with noise filtering, or perhaps (but this seems a bit overkill) a USB audio output device rather than using the iMac audio out. I cannot begin to describe just how much better the AE Aego's are, but the interference is annoying...
View 3 Replies View Related2007 iMac Snow LeopardAny idea why my external speakers would stop working?
This happened after I unplugged speakers from outputand plugged in headphones. After done, when I pluggedspeakers back in it stopped working. Headphones no longer
work either. Internal speakers still do, though.I went into preferences and sounds. The external speakers are no longer showing up. Built in output is the only option available. I unplugged everything and turned everything off. Plugged them back in and turned the mac back on. Nothing.
With my iMac, I have Swan M10 external speakers that I love. I also like to use headphones sometimes.
My currrent solution for switching from speakers to headphones (or vice versa) involves physically turning the computer, disconnecting one input in the headphone jack, and putting in the other one.
External speakers stopped working. Verified speakers operating with Iphone. Checked that speakers plugged in correctly. Tried usual power cycling step. External speakers do not show up in sound preferences.
Info:
iMac
Imac 27" mid-2011 running Maverics 10.9.3 I'm not getting any sound from internal or ext. speakers. I can hear the startup sound when booting up.
System Preferences->Sound only shows Digital Out for OUTPUT and Output Volume is maxed and can't be adjusted. Mute is NOT checked.
I've done an SMC and PRAM reset with no change. I've tried multiple times plugging and unplugging the external speaker cable jack.
I have iTunes 10.6.1 (7) an Airport Extream Version 6.0 Airport Utility (600.92) That I use with two airport express stations, an Apple TV 2nd Generation with latest software up date. Also have Ipad 3rd Generation and two I phone 4's. Issue: After installing the latest Airport Utility software update I'm unable to connect to my remote speakers in iTunes. The speakers are visible in the pop up menu but iTunes times out when trying to connect. If I use remote to select Apple TV and then via Apple TV select my Computers Library I'm able to play music on the Apple TV / Home Speakers... but still not the Airport Express Stations.
When using remote on the iPhone or iPad the speakers are visible as well but I'm unable to select them... iTunes times out. I can steam music from that is on my iPhone or iPad to each individual speaker, but multiple speaker control is not available and the music from my library is not available. I believe the problem is in the Airplay feature of iTunes and I believe the problems arise when you install the latest version of Airport Utility. You can play on remote speakers, only one at a time, and only if you have the music on a stand alone device (iPhone or iPad)... in summary, bypass iTunes and you can be successful... marginally successful.
Speakers work but cannot get any sound output. Running windows 7 on Intel iMac. Speakers sound on booting and graphics in Control panel and on toolbar indicate sound is being recieved but nothing comes out of speakers or headphones.
Info:
iMac, Mac OS X (10.6.2)
I hope I'm not double posting. Have any of the other new iMac owners experienced weird frequencies coming from external speakers that are connected to their iMacs?
For example: I have a set of studio monitors that are hooked up to my iMac using a firewire audio interface. Whenever I'm copying data I get an extremely high-pitched frequency coming from my speakers that sounds like my hard drive spinning. Also, whenever I'm scrolling or moving the magic mouse I get a loud buzzing coming from the speakers (especially when scrolling). None of this stuff happened with my previous 20" iMac C2D. I have experienced this issue with all three of the 27" iMacs that I have gone through thus far (due to the yellow tint issue). Does this sound like something I'm just going to have to live with. All of these high pitched frequencies are driving me batty!
The audio on my macbook suddenly stopped working. When I click on the audio adjuster, it won't even let me change the level (the little circle is white now, not blue).
But when I plug in headphones or an external speaker, everything works fine. I can once again adjust the audio and get sound
There was a red light eminating from the audio out jack for a while (last couple of days) but today, there is no longer a red light. Still no audio from the speakers.
I have had a MacMini for about 2 months now, and use brand new Creative brand speakers to plug into it. Everything has worked fine, but this morning as I went onto a band's MySpace page I was informed that the music could not be played without installing a newer version of Adobe Flash Player. So I clicked the link and went through the installation and sure enough now the MySpace music player came up. Unfortunately, I noticed there was no sound coming out of my speakers. First, I checked each plug, but still no sound. Second, I reinstalled Adobe Flash Player for Mac (from the Adobe website), but it still didn't work. Third, I took the audio plug connecting my speakers and MacMini out and noticed that the music was playing through my MacMini, but when I plugged it back in I noticed that it wasn't coming through my external speakers. Dumbfounded, I plugged my iPod in through the Aux In on my speakers and noticed it worked perfectly fine. Finally, I switched audio cables connecting my MacMini and my Creative brand speakers and it still didn't work!What is going on here?
View 3 Replies View RelatedI have just aquired a slot loading iMac g3. It is a blueberry model, with a 350 MHz g3, and 512 megs of ram. Not that that matters. Anyway, it seems to have been dropped and has a crack above the crt. The speakers also do not work. I plugged in a pair of speakers in both of the headphone jacks. Nothing. The audio port. Nothing. I checked the volume, and it was at full blast. Not even a peep from the speakers. The sound area in the system preferences did not have an option for internal speakers, it was just greyed out with headphones as the selection. By the way, it is running Tiger. I opened it up, and everything is connected. I took the logic board off, and everything is fine. I put it back together and booted it up and... NOTHING..... What could be going wrong?
View 4 Replies View RelatedCould it do any harm to my Macbook if I plugged the speakers from my old iMac G4 into its headphone socket? In fact, can speakers in general be used via the Macbook headphone socket?
Info:
iMac, Mac OS X (10.4.11)
Random question, but does anyone know how to get a usb microphone to play through speakers? - i.e. I want to use it in a karaoke kind-of-way!!
View 2 Replies View Relateddoes anyone who has the 24in iMac have any problem with the sound from the speakers? Sometimes when I listen to music on iTunes I will then get a screeching sound for a few seconds then it will go off.
View 24 Replies View RelatedWhich speakers are better, the ones that come built-in on the '09 24" iMac or Logitech X230? I'm not sure what the iMac's speaker stats are, but here are the stats for x230's:
# Total RMS power: 32 W RMS
Satellites: 12 W RMS (6 W x 2)
Subwoofer: 20 W RMS
# Total peak power: 64 W
# Frequency response: 40Hz - 20kHz
# Drivers:
Satellites: (2) 2" drivers per satellite
Subwoofer: 5.25" ported driver
# Speaker dimensions (H x W x D, cm):
Satellites: 20.3 X 6.4 X 7.6
Subwoofer: 22.9 x 15.2 x23.5
# Signal-to-noise ratio: >96dB
Reason I ask is that I have the x230's and they're considered as cheap speakers, so I don't know if I should use them with the iMac or not. The one advantage I see them having over the iMac's is that they have a 20w subwoofer, but I don't know if the satellites are better or not.
I bought a new iMac a couple of weeks ago, it's my first alu one but I've had two of the white plastic ones before. The sound from the internal speakers in my old iMacs is pretty acceptable for day to day usage (not playing music of course), but the new one sounds horrible... extremely tinny. So is this just what they're all like these days? If not I guess it's got some issues:-/
View 3 Replies View RelatedIs there a way to tell if/how my speakers are damaged? I have 24" aluminum imac (bought December 2007, whichever model that is), and I was using the internal speakers (I don't normally do this). I was playing an avi file (xvid / mp3 encoding) on VLC.app, and i struck the space bar to pause it. Instead of stopping, my comp emitted an extremely loud "beep" sound at around 400 Hz, and ever since the audio has been weird. At first it was sorta/really scratchy and broken and a little diminished in loudness, but now it is very quiet, playing sounds at around 1/4 the normal volume. What the hell happened to it?
View 6 Replies View RelatedAfter I pulled out the jack for my speakers the volume icon was greyed out [URL]and soon I realized that internal speakers as such have been disabled from the system [URL]When I restart the startup chime is played as usual.Is it a hardware or software thing?
View 3 Replies View RelatedThis may or may not be a stupid proposition, but here it goes: I have a Klipsch Promedia GMX 2.1a speaker system which I like very much. However, I was wondering if I could replace the existing satellite speakers with bookshelf speakers (like Klipsch RB-10 s). I'm hoping this will work because I want to increase the audio output of my system without spending money on an amplifier.
View 3 Replies View RelatedI know that there's a headphone output jack and an audio input jack on the iMac. Is there anyway to hook up my 5.1 Logitech speakers to the iMac? What kind of adapter would I need or is it even possible?
View 1 Replies View RelatedLove my new imac but the weak link are the built in speakers. Any recommendations for simple usb designed speakers for a 21.5 IMac model?
View 1 Replies View RelatedMy grand dad found some old g4 cube speakers. You know the round ballish ones. They used to connect to a cube with usb. You could just plug it in and they would work. My granddad now has a imac g5. He wants to connect his cube speakers to his IMac.
View 4 Replies View RelatedJust got my brand-new 24-inch iMac yesterday, unpacked it and hooked it all up last night (2.93 Ghz, Nvidia120 card). First off, absolutely beautiful computer. But... I'm already noticing a loud "pop" from the speakers on occasion. In doing a little research, I've seen where others have had this problem, but mostly with external speakers. Mine is with the built-in speakers.
Seems to happen when I open a movie or sound file --- and only when one hasn't been opened in the last few minutes. I get a fairly loud "pop" upon opening the file, then everything's fine. If I immediately open another movie or audio file, I don't get a repeat of the pop, but if I wait, say, 5 minutes before opening another movie or audio file, I get the pop again. No peripherals hooked up (other than cable modem) and no software installed that didn't come on it.
I just got my iMac yesterday, and its been awesome, but I have one question. The classic "bong" sound at startup, I know that is the result of a successful POST, but mine didn't do one after the 1st startup. I had speakers plugged in to it when I started up the 2nd time, and no sound. I unplugged the speakers, and I got the sound. Is that normal or do I need to contact Apple? I jut want to make sure nothings wrong with my iMac. I checked the POST results in System Profiler and it said Passed.
View 8 Replies View Related