For some reason, I can't get Logic Express 8 to output audio to my Mac's attached speakers. It outputs fine through my M-Audio interface, though, but I'd just like to listen without headphones.
For some reason, I can't get Logic Express 8 to output audio to my Mac's attached speakers. It outputs fine through my M-Audio interface, though, but I'd just like to listen without headphones.
View 4 Replies View RelatedI've recently started using headphones more and more and something that really bothers me is that I can't change the output source to the Mac's speakers unless I unplug the headphones entirely. Is there a way to do this without unplugging the headphones? I've looked through Audio MIDI Setup Utility as well as the Sound system preferences but found nothing.
View 2 Replies View RelatedI have speakers plugged into the rear audio output, and headphones plugged into the front. I was wondering if it were possible to have audio play from both simultaniously...
View 2 Replies View RelatedI am streaming iTunes to another room using an Audioengine AW1 (over usb, not the analog input) and it works fine. Looking at JACK audio, Soundflower or Apple's AudioMIDI utility, I feel I should be able to use one or a combination of these resources to output iTunes to both the AW1 and my desktop's headphone port. Unfortunately, I can't seem to perform both. Well, technically I can in using a "y" audio cable to output from the Mac headphone port to headphones and to the analog-in on the AW1's, but that really doesn't work adequately. The output volumes are considerably lower and tied together. I am looking to figure out how to add a usb audio device as another, and simultaneous output.
View 3 Replies View Relatedi'm using my mac mini with the ACD 24" and i get the sound from the screen because it is "very slightly bettter" than the speaker of the mac mini (even if both are quite disappointing)
when i connected external speakers on the jack of the mini, it is simply impossible even with the soft soundsource to switch audio outputs on the fly
external speakers seem to have the priority over other outputs
is there a way to get through it ?
I have owned my MacBook Pro since June 2010, and have always used a pair of independently powered (via adapter) external Dell speakers for audio output. Since upgrading to Lion about 1 month ago, I was having intermittent audio issues, which were resolved by re-starting my computer (not ideal but it worked). Today, the speakers just stopped working. The internal speakers work, but when I plug the externals into the headphone port, they don't produce sound. Earbuds in the same port also don't work (I know the earbuds are good). The external speakers are being recognized by the sound panel in system preferences.
Info:
MacBook Pro, Mac OS X (10.7.4)
I feel like I once had a PrefPane for this problem but just am having a hard time searching for it. Currently I have my heaphones jack Line-In routed to my AV Receiver for iTunes music in my room, but whenever I am YouTubing or other stuff while listening to music the System Sounds come out of my Loudspeakers too. I am interested in routing only the iTunes audio through the headphone jack, and everything else to run through my iMac's internal speakers (2007 iMac AL).I saw the SoundFlower thing out there but didn't think that was the ticket
View 1 Replies View RelatedThe speakers on my Macbook have suddenly stopped working. If you plug headphones in, fine. In the system preferences, 'built in speakers' are no longer an option for audio output. Just 'digital out'. When I try and change the volume of the speakers, the symbol is greyed out, and there's a little "you can't do this" symbol.
I have a Macbook black 2.0ghz with 10.5.8
i can't get macbookpro 2010 to recognize internal speakers and audio output. only optical OUTPUT. CAN'T GET ANY SOUND EXCEPT FOR OPTICAL PORT
Info:
macbook pro 15" 2.33Ghz, 3GB RAM, 120HD/1TB Ext. Drive, Mac OS X (10.5.6), Final Cut Express 4.0.2/Sony HDR-SR11
I have a white Macbook, Intel Core Duo 2, 2 Gb Ram. (October 2008) Under Leopard, my volume (audio output is a shame); under bootcamp with Windows XP on the hard drive, volume is almost double: is there any work around on this?
View 3 Replies View RelatedI had to plug in my Macbook Pro into a HDMI cable to watch something on a HD TV and had to switch some settings in the sound settings. Now when I plug in headphones and AUX cords the music still comes out of the internal speakers and the only option in the sounds settings for output are the internal speakers.
Info:
MacBook Pro, Mac OS X (10.7.4)
I recently installed windows vista (home edition) via bootcamp on my macbook pro.
Everything is running perfectly apart from the sound. I think it might an issue with the computers sound card. When I plug my headphones into the audio output jack, no sound comes through... it still plays out of the speakers. The sound is audible, but just barely.
What may be causing this? Are there any specific drivers I need to install?
My sound keeps turning off. When I check the settings, the output device switches randomly between Internal and Digital output. I have no idea where the Digitial Output is coming from and this started about a month again. It switches randomly and then I loose all sound for a few seconds. Sometimes it happens once then stops for a few days, other times it switches back and forth for 5 min. No idea!!!Â
Info:
MacBook, Mac OS X (10.6.8)
I recently purchased a set of Logitech Z-5500 speakers. I have the proper optical cable, and all my speakers are set up properly. For whatever reason, I can't get 5.1 to output from my Macbook Pro when using iTunes.
Audio MIDI Setup is currently set to 44100.0 Hz 2ch-32bit digital output. I can't change it to 5 channel. (I don't know anyone who has to, anyway.)
I usually listen to any output from my iMac (Intel Core 2 Duo 3.06GHz, 27", early 2010) through an external amp and speakers, via the analog output (headphone socket). However - I recently disconnected the jack plug to listen through the machine's internal speakers but was greeted with silence. I checked the volume via the kb controls - the mini display appeared on screen suggesting that the volume was set on full, though I could not adjust it at all. I reconnected the jack plug and sound came out from my external speakers as usual. On disconnection, no volume. I searched the forums for ideas, and came across this support article: [url],,, which I followed to the letter.
When I open 'Sounds' in System Preferences, the only output option available to me is 'Digital Out' - there is no option for internal speakers or headphones. However, if I plug in the line-out jack, the options change - only 'Headphones' is available (no 'Digital Out' any more). Following the article, I checked to see if there was a red light in the digital output socket, which there is not.
Info:iMac, Mac OS X (10.6.8)
I use an external monitor with my macbook, it's a couple of years old 17" Sony TFT. I connect it to the macbook through a DVI cable into the adaptor, into the mini DVI port on the mac. About 90% of the time I do this, the second display shows the correct graphics but is tinted fluorescent green, however if I play aorund enough with the connection, it goes back to full colours. Is this something a genius could fix, or do you have any recommendations about what to do?
View 8 Replies View RelatedA headphone jack got stuck in my macbook pro as it fell down in a plane going thru turbulences (lucky me!).So that now it thinks there are headphones connected while there is nothing...I wont be anywhere near an apple store for the next month so I was just wondering if it was possible to force the use of the internal speakers over the output jack?
View 6 Replies View RelatedMy MacBook Pro seems stuck on digital output thus no sound from speakers. Headphones recognized and work but internal speakers don't revert to default or even show up as a sound option in System Preferences. Any way to get internal speakers back? Restarting computer did not do it.
Info:
MacBook Pro, Mac OS X (10.5.8)
everytime i unplug computer from wall outlet after a storm,,,,the external speakers wont work when i reboot...so i went to the sound on preference and the output channel will only list headphones and no option for external speakers.
Info:
Mac OS X (10.4.11), mini mac
Can the Airport express play all sound from my PC computer or is it only for Itunes?
Like, I want to be able to hear the sound from my movies when editing in adobe premiere on my main speakers, without the hassle of cables! is this possible with the airport express?
The sound output in my Macbook Pro has been going in and out now for a number of months. And yesterday it finally got stuck on "Digital Output" meaning when I take out headphones from the jack, the internal speakers do not work. I am planning on taking it in and wanted to know, since I am still under warranty will Apple repair it, or give me a new one?
View 1 Replies View Relatedi want to output audio on two interfaces. the headphone jack and USB (bose companion 5's)
View 3 Replies View RelatedI normally leave my speaker output balanced right in the middle (under System Prefs>Sound>Output), however I have noticed that my audio output has been going out of balance by itself recently.
One speaker will sound louder than the other and sure enough, I'll go to the system prefs and the balance will be off. Nobody has else uses my machine and I know that I don't ever touch the audio output.
I have an iBook G4 running 10.4.11 connected to a pair of Brookstone speakers and subwoofer.
A headphone jack got stuck in my macbook pro as it fell down in a plane going thru turbulences (lucky me!).So that now it thinks there are headphones connected while there is nothing...I wont be anywhere near an apple store for the next month so I was just wondering if it was possible to force the use of the internal speakers over the output jack?
View 1 Replies View RelatedSpeakers work but cannot get any sound output. Running windows 7 on Intel iMac. Speakers sound on booting and graphics in Control panel and on toolbar indicate sound is being recieved but nothing comes out of speakers or headphones.
Info:
iMac, Mac OS X (10.6.2)
I have a mac mini (solo intel) 10.4 OSX. I have no audio output when attaching an external input source like a CD player or ipod to the input jack on my Mac Mini. Audio output from ITunes or movies clips in IPhoto works fine. I have checked the cables and connections. I have checked the "sound" location in System Preferences to make sure the "built in output" source is selected. The input volume display shows that the audio input is being registered. I have checked "system profiler" in the Utilities folder in Applications to make sure the "built in output" AKA headphone outlet is recognized.
I have the "Soundflower" App. installed but turned off.
why the audio output from the internal sources like ITunes and IPhoto music clips work but the audio output from an external input source does not? Is there some software or a driver required for audio output from an external source that is not required for audio output from an internal source?
I just bought a converter cable to be able to put things from my laptop onto the TV. More specifically, I bought this one: [URL]
I've read the reviews and they were all really great. The cable is excellent for images; however, I cannot for the life of me figure out how to do the sound.
The reviews said that the audio output option under system preferences should show up with the receiver, but all it has is my computer speakers.
My audio headphone jack is not working anymore and I want to use my line-in as my audio out. Since I don't use them that much. So I can use headphones/speakers again.
View 3 Replies View RelatedI've got a Headroom Headphone Total Bithead mobile Amp., 2.66 MacPro, and Sennheiser HD650's (that are hard to drive). The amp. has a high and low gain switch. The low gain sounds better, but I can't get enough vol. when on low gain. I've got iTunes level up as high as it can go. I've played around with Sound prefs. and the Audio/Midi sound levels. They all seem to actually be the same vol. control.
I also see that iTunes, under "Get Info" has an individual vol. adjustment, but I'm not sure if I really want the sound files to be pumped up for when I use them on my iPhone.
