For some reason, I can't get Logic Express 8 to output audio to my Mac's attached speakers. It outputs fine through my M-Audio interface, though, but I'd just like to listen without headphones.
View 4 RepliesFor some reason, I can't get Logic Express 8 to output audio to my Mac's attached speakers. It outputs fine through my M-Audio interface, though, but I'd just like to listen without headphones.
and connect my keyboard directly.. are the internal speakers of the imac enough? or i should buy the imac with some good external speakers?
View 9 Replies View RelatedI am streaming iTunes to another room using an Audioengine AW1 (over usb, not the analog input) and it works fine. Looking at JACK audio, Soundflower or Apple's AudioMIDI utility, I feel I should be able to use one or a combination of these resources to output iTunes to both the AW1 and my desktop's headphone port. Unfortunately, I can't seem to perform both. Well, technically I can in using a "y" audio cable to output from the Mac headphone port to headphones and to the analog-in on the AW1's, but that really doesn't work adequately. The output volumes are considerably lower and tied together. I am looking to figure out how to add a usb audio device as another, and simultaneous output.
View 3 Replies View Relatedi'm using my mac mini with the ACD 24" and i get the sound from the screen because it is "very slightly bettter" than the speaker of the mac mini (even if both are quite disappointing)
when i connected external speakers on the jack of the mini, it is simply impossible even with the soft soundsource to switch audio outputs on the fly
external speakers seem to have the priority over other outputs
is there a way to get through it ?
I have owned my MacBook Pro since June 2010, and have always used a pair of independently powered (via adapter) external Dell speakers for audio output. Since upgrading to Lion about 1 month ago, I was having intermittent audio issues, which were resolved by re-starting my computer (not ideal but it worked). Today, the speakers just stopped working. The internal speakers work, but when I plug the externals into the headphone port, they don't produce sound. Earbuds in the same port also don't work (I know the earbuds are good). The external speakers are being recognized by the sound panel in system preferences.
Info:
MacBook Pro, Mac OS X (10.7.4)
I feel like I once had a PrefPane for this problem but just am having a hard time searching for it. Currently I have my heaphones jack Line-In routed to my AV Receiver for iTunes music in my room, but whenever I am YouTubing or other stuff while listening to music the System Sounds come out of my Loudspeakers too. I am interested in routing only the iTunes audio through the headphone jack, and everything else to run through my iMac's internal speakers (2007 iMac AL).I saw the SoundFlower thing out there but didn't think that was the ticket
View 1 Replies View RelatedThe speakers on my Macbook have suddenly stopped working. If you plug headphones in, fine. In the system preferences, 'built in speakers' are no longer an option for audio output. Just 'digital out'. When I try and change the volume of the speakers, the symbol is greyed out, and there's a little "you can't do this" symbol.
I have a Macbook black 2.0ghz with 10.5.8
I am running an M-Audio Keystation Pro 88 MIDI controller via USB into Logic Express 7. I use Mac OSX. I'm going straight from the Keystation Pro 88 into the MIDI port of my MacBook Pro. I use a Pre Sonus Firepod as my audio interface (not sure if that's even relevantWhen I begin playing too many notes (especially after pressing the sustain), the piano (Garage Band grand piano .exs) starts to cut out. It sounds like BAD static, as if the MIDI were overloading Logic. I've tried changing the buffer size in audio preferences - it gets no better, only worse when I lower the size (32 being nothing but static).
View 1 Replies View Relatedi can't get macbookpro 2010 to recognize internal speakers and audio output. only optical OUTPUT. CAN'T GET ANY SOUND EXCEPT FOR OPTICAL PORT
Info:
macbook pro 15" 2.33Ghz, 3GB RAM, 120HD/1TB Ext. Drive, Mac OS X (10.5.6), Final Cut Express 4.0.2/Sony HDR-SR11
Does anybody know what the specific differences are between Logic Studio and Logic Express?
Also, is there any place where I can get Logic Studio for cheaper than the $499 retail price? The cheapest place I found I was at MacMall for only $49 cheaper.
Can anybody find anyplace cheaper, preferably around $350 or lower?
Is it likely? Aperture is a pro app and is on there, and it'd make sense if they also added Logic and Final Cut - it'd be like a professional version of iWork with the whole set.
View 18 Replies View RelatedI really would like to get the cheaper, lighter, smaller, more portable 13" if at all possible. However, I need it to smoothly run Final Cut Express (I do some video editing for work) and Logic Express (I'm a full time musician). I travel a lot with my computer and my current 15" 2.16GHZ MBP has always been a bit bulky and heavy, and lags a bit when using Final Cut.
Will I get smooth performance running FCE and LE with the 13", and will it be a capable computer (keep up with updated software) for the next 4 years or so? I'd probably max out the RAM and maybe get a faster processor if I was to settle on the 13". If not, I'm looking at having to get the 15", any suggestions on which 15" model would be the best for me in terms of what I need it for? Would I be set with a lower end 15"?
MacBook Pro 2.16
10.4.11
Situation: no sound out from speakers in admin and user account and newly created account. Headphones work, startup chimes work on speakers.
Go to Sound in Preferences and only shows Digital Out for output. Should show Internal Speakers. Ran Diskwarrior and Applejack and zapped pram. Took mac apart and confirmed speakers wired correctly which is verified by the start up chimes being audible on the internal speakers. tested all accounts and created new account all with the same results. Did search of Google and MacRumor. Found one unaswered post indicating same problem. Had same problem with another macbook pro, ran same steps, take apart, confirm wiring setup, Diskwarriored, applejacked and zapped pram and it fixed the problem. I'm not sure what else to try. Did check Audio Midi Setup util and it also did not see the internal speakers.
I'm looking for a "media server" of some sort. Buying a second computer to have constantly running to store movies/music is out of the question since I just want to have it for my MBP, 360, and roommates PS3. I want to get a NAS (Network Attached Storage), but the main router is in my roommates room. I don't trust my roommate to keep a $100+ hard drive safely in his room, and he won't want the responsibility of making sure nothing happens to it when people are over and what not. I already have an AirPort Express in my room. I know the AirPort Express can be used as a network extender. Would I be able to connect the NAS to the AirPort Express via Network Cable and have it work?
View 1 Replies View RelatedTrying to figure out if something is up with mine and a buddies machine specifically or they are all buggered....
Please post if you have an audio pop or click type sound that is intermittent (every few minutes or couple hours) on your i5 or i7 machine while playing audio through external speakers.
If you have it, please describe your situation as it occurs so we can perhaps isolate it:
I.e. Plugged in / on battery, programs running, usb plugged in, etc.
Mine happens whether on battery or not, iTunes, games, movies, Locked in video card...
I have a white Macbook, Intel Core Duo 2, 2 Gb Ram. (October 2008) Under Leopard, my volume (audio output is a shame); under bootcamp with Windows XP on the hard drive, volume is almost double: is there any work around on this?
View 3 Replies View RelatedI recently purchased a set of Logitech Z-5500 speakers. I have the proper optical cable, and all my speakers are set up properly. For whatever reason, I can't get 5.1 to output from my Macbook Pro when using iTunes.
Audio MIDI Setup is currently set to 44100.0 Hz 2ch-32bit digital output. I can't change it to 5 channel. (I don't know anyone who has to, anyway.)
I usually listen to any output from my iMac (Intel Core 2 Duo 3.06GHz, 27", early 2010) through an external amp and speakers, via the analog output (headphone socket). However - I recently disconnected the jack plug to listen through the machine's internal speakers but was greeted with silence. I checked the volume via the kb controls - the mini display appeared on screen suggesting that the volume was set on full, though I could not adjust it at all. I reconnected the jack plug and sound came out from my external speakers as usual. On disconnection, no volume. I searched the forums for ideas, and came across this support article: [url],,, which I followed to the letter.
When I open 'Sounds' in System Preferences, the only output option available to me is 'Digital Out' - there is no option for internal speakers or headphones. However, if I plug in the line-out jack, the options change - only 'Headphones' is available (no 'Digital Out' any more). Following the article, I checked to see if there was a red light in the digital output socket, which there is not.
Info:iMac, Mac OS X (10.6.8)
My friend is looking into buying the new 27" iMac Core i7 to replace his PC desktop. The only thing holding him back is that he has an analog surround sound system he uses for his speakers. I am having a hard time myself finding a converter that can make his speakers work in the iMac's optical digital output port. Any products out there that will do that?
View 12 Replies View RelatedI've recently started using headphones more and more and something that really bothers me is that I can't change the output source to the Mac's speakers unless I unplug the headphones entirely. Is there a way to do this without unplugging the headphones? I've looked through Audio MIDI Setup Utility as well as the Sound system preferences but found nothing.
View 2 Replies View RelatedA headphone jack got stuck in my macbook pro as it fell down in a plane going thru turbulences (lucky me!).So that now it thinks there are headphones connected while there is nothing...I wont be anywhere near an apple store for the next month so I was just wondering if it was possible to force the use of the internal speakers over the output jack?
View 6 Replies View RelatedMy MacBook Pro seems stuck on digital output thus no sound from speakers. Headphones recognized and work but internal speakers don't revert to default or even show up as a sound option in System Preferences. Any way to get internal speakers back? Restarting computer did not do it.
Info:
MacBook Pro, Mac OS X (10.5.8)
everytime i unplug computer from wall outlet after a storm,,,,the external speakers wont work when i reboot...so i went to the sound on preference and the output channel will only list headphones and no option for external speakers.
Info:
Mac OS X (10.4.11), mini mac
I've been working on this powerpoint (2010 mac version) for days now, and all of a sudden, right before I'm about to submit it to my professor and class, the slideshow crashes. Non-stop. I have audio attached to every slide as aiff files, and the crash always comes when the slideshow goes from the first slide to the 2nd. Powerpoint simply freaks out.
Info:
MacBook, Mac OS X (10.4.11)
The sound output in my Macbook Pro has been going in and out now for a number of months. And yesterday it finally got stuck on "Digital Output" meaning when I take out headphones from the jack, the internal speakers do not work. I am planning on taking it in and wanted to know, since I am still under warranty will Apple repair it, or give me a new one?
View 1 Replies View RelatedEverything was working fine until I updated osx to 10.4.10 and now Logic Express keeps on crashing. The track starts playing fine then the core audio overload message appears then the program crashes when theres very little strain on the system. Ive attached the full error message... If anyone knows what the problem is please let me know.
View 6 Replies View RelatedI have seen a few videos about mastering and gave it a try myself. It can be done by clicking the master tab, then going to the Input 1-2 column setting and then clicking setting - mastering, etc.
When I first did this a few weeks ago, there were many options such as hip hop mastering, electronic mastering, etc.
Now, when I do so, I have different - much less enticing options and have no idea where the good ones went.
I've just installed Logic Express 9 and was told that this would allow me to access and use my Apple Jam Pack Symphony Orchestra.
So far I can find now way to get this to appear in Logic Express.
Can the Airport express play all sound from my PC computer or is it only for Itunes?
Like, I want to be able to hear the sound from my movies when editing in adobe premiere on my main speakers, without the hassle of cables! is this possible with the airport express?
