My new 25" HP 2510i monitor arrived today, all is good except from the speaker system, I can either have the iMac's built in speakers used or the built in monitor speakers used. Is it possible to combine them both and use both?
The monitor's audio interface connects to my iMac via the headphone jack on the back of the system.
Which speakers are better, the ones that come built-in on the '09 24" iMac or Logitech X230? I'm not sure what the iMac's speaker stats are, but here are the stats for x230's:
# Total RMS power: 32 W RMS
Satellites: 12 W RMS (6 W x 2)
Subwoofer: 20 W RMS
# Total peak power: 64 W
# Frequency response: 40Hz - 20kHz
# Drivers:
Satellites: (2) 2" drivers per satellite
Subwoofer: 5.25" ported driver
# Speaker dimensions (H x W x D, cm):
Satellites: 20.3 X 6.4 X 7.6
Subwoofer: 22.9 x 15.2 x23.5
# Signal-to-noise ratio: >96dB
Reason I ask is that I have the x230's and they're considered as cheap speakers, so I don't know if I should use them with the iMac or not. The one advantage I see them having over the iMac's is that they have a 20w subwoofer, but I don't know if the satellites are better or not.
I have iTunes 10.6.1 (7) an Airport Extream Version 6.0 Airport Utility (600.92) That I use with two airport express stations, an Apple TV 2nd Generation with latest software up date. Also have Ipad 3rd Generation and two I phone 4's. Issue: After installing the latest Airport Utility software update I'm unable to connect to my remote speakers in iTunes. The speakers are visible in the pop up menu but iTunes times out when trying to connect. If I use remote to select Apple TV and then via Apple TV select my Computers Library I'm able to play music on the Apple TV / Home Speakers... but still not the Airport Express Stations.
When using remote on the iPhone or iPad the speakers are visible as well but I'm unable to select them... iTunes times out. I can steam music from that is on my iPhone or iPad to each individual speaker, but multiple speaker control is not available and the music from my library is not available. I believe the problem is in the Airplay feature of iTunes and I believe the problems arise when you install the latest version of Airport Utility. You can play on remote speakers, only one at a time, and only if you have the music on a stand alone device (iPhone or iPad)... in summary, bypass iTunes and you can be successful... marginally successful.
the external speakers (and the earphones) I use for my i-mac suddenly stopped playing sound from my imac. They do work though when I plug them to the i-pod. My imac speakers work perfectly. Any ideas what's happening?
View 1 Replies View Relatedbuilt in speakers disabled
Info:PowerBook G4 (17-inch Double Layer SD), Mac OS X (10.7.3), speaker icon is grey
the sound is not playing from my built in speakers, but my slider and keyboard controls both show full volume.
Info:
Mac Pro, Mac OS X (10.7.3)
I have no sound from my built in speakers and no built-in audio device listed in my settings. They worked yesterday!!
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
it cant find built in speakers, What´s the solution?
Info:
MacBook Pro, Mac OS X (10.6)
I am streaming iTunes to another room using an Audioengine AW1 (over usb, not the analog input) and it works fine. Looking at JACK audio, Soundflower or Apple's AudioMIDI utility, I feel I should be able to use one or a combination of these resources to output iTunes to both the AW1 and my desktop's headphone port. Unfortunately, I can't seem to perform both. Well, technically I can in using a "y" audio cable to output from the Mac headphone port to headphones and to the analog-in on the AW1's, but that really doesn't work adequately. The output volumes are considerably lower and tied together. I am looking to figure out how to add a usb audio device as another, and simultaneous output.
View 3 Replies View RelatedI have built-in home speakers and I wanted to know if you have to buy airport express to use airplay. Do you have to have airplay wireless speakers to play music from airplay?
Info:
Airplay Speakers, Other OS
how you can call people from Skype™ with no microphone, but only from speakers? My friend wants to know this, he apparently wants to use some soundboard, and if you call from your speakers, the person you are calling can only hear the soundboard but nothing else like background noise or anything.
He's been bugging me to find this out, lol. He has a MacBook Pro 15" OS X Lion.
Info:
MacBook Air, Mac OS X (10.6.8)
I've just updated my iMac 7.1 to Snow Leopard and now I have no sound and no output or input options on the sound menu.
Info:
iMac, Mac OS X (10.6.3)
I have tried searching about this before but does anyone know if any half-decent (iMac / LED Cinema Display)-like speakers have been released. I was just curious if any company had released speakers with stands that look similar to the iMac or the new LED Display. I have seen the mStand that is basically a macbook stand that is designed like the iMac stand but i have not seen any speakers. If i ever thought about buying speakers i would like them to go with the new LED Display stand (not that i have one, nor a macbook for that matter but things can always change). I just like things to match, like black keys on the new keyboards and and some kind of aluminium+black color mouse. The speakers would have to have a stand that looked pretty much like the display stand (smaller of course) and the actual speakers should be aluminum-color too, possibly with a black bezel and a rectangle shape with curved corners, not round or anything.
View 6 Replies View RelatedI'm a recent PC to iMac convert and have hooked up my iMac to my TV receiver (DVI to HDMI connector and a Toslink cable to the audio). The issue is as soon as I plug in the audio connector the iMac speakers stop working. I'd like to leave the connector plugged in and still be able to use the iMac speakers. Of course when I play a movie on the TV I'd just mute the iMac speakers.
View 2 Replies View RelatedThe speakers on my Macbook have suddenly stopped working. If you plug headphones in, fine. In the system preferences, 'built in speakers' are no longer an option for audio output. Just 'digital out'. When I try and change the volume of the speakers, the symbol is greyed out, and there's a little "you can't do this" symbol.
I have a Macbook black 2.0ghz with 10.5.8
After I pulled out the jack for my speakers the volume icon was greyed out [URL]and soon I realized that internal speakers as such have been disabled from the system [URL]When I restart the startup chime is played as usual.Is it a hardware or software thing?
View 3 Replies View RelatedThis may or may not be a stupid proposition, but here it goes: I have a Klipsch Promedia GMX 2.1a speaker system which I like very much. However, I was wondering if I could replace the existing satellite speakers with bookshelf speakers (like Klipsch RB-10 s). I'm hoping this will work because I want to increase the audio output of my system without spending money on an amplifier.
View 3 Replies View RelatedMacBook Pro 2.16
10.4.11
Situation: no sound out from speakers in admin and user account and newly created account. Headphones work, startup chimes work on speakers.
Go to Sound in Preferences and only shows Digital Out for output. Should show Internal Speakers. Ran Diskwarrior and Applejack and zapped pram. Took mac apart and confirmed speakers wired correctly which is verified by the start up chimes being audible on the internal speakers. tested all accounts and created new account all with the same results. Did search of Google and MacRumor. Found one unaswered post indicating same problem. Had same problem with another macbook pro, ran same steps, take apart, confirm wiring setup, Diskwarriored, applejacked and zapped pram and it fixed the problem. I'm not sure what else to try. Did check Audio Midi Setup util and it also did not see the internal speakers.
Short and sweet: how do the speakers on the new Cinema Display sound? I know they won't be phenomenal or anything, but are they at least decent? Balanced? Loud?
View 4 Replies View RelatedI don't really jam out too loud, but in my opinion, the speakers on the 15" MBP aren't terribly loud. Are the speakers on the 24" Cinema Display any louder? I'm kind of considering picking up one for $599 refurb.
View 3 Replies View RelatedI noticed that in the specifications page regarding the 27" Cinema Display shows that its speakers are 49 watts. How many watts is the current 24" Cinema Display? I'm just curious how loud the 27" Cinema Displays speaker will be. Is the current 27" iMac speakers the same as the stand alone 27" Cinema Displays that will be released in September?
View 2 Replies View RelatedI have just aquired a slot loading iMac g3. It is a blueberry model, with a 350 MHz g3, and 512 megs of ram. Not that that matters. Anyway, it seems to have been dropped and has a crack above the crt. The speakers also do not work. I plugged in a pair of speakers in both of the headphone jacks. Nothing. The audio port. Nothing. I checked the volume, and it was at full blast. Not even a peep from the speakers. The sound area in the system preferences did not have an option for internal speakers, it was just greyed out with headphones as the selection. By the way, it is running Tiger. I opened it up, and everything is connected. I took the logic board off, and everything is fine. I put it back together and booted it up and... NOTHING..... What could be going wrong?
View 4 Replies View RelatedCould it do any harm to my Macbook if I plugged the speakers from my old iMac G4 into its headphone socket? In fact, can speakers in general be used via the Macbook headphone socket?
Info:
iMac, Mac OS X (10.4.11)
Random question, but does anyone know how to get a usb microphone to play through speakers? - i.e. I want to use it in a karaoke kind-of-way!!
View 2 Replies View RelatedI have Harmon Kardon speakers with a subwoofer that I used on my old PC; it used a Soundblaster card. Can I use the system on the iMac? If so, how?
View 7 Replies View Relateddoes anyone who has the 24in iMac have any problem with the sound from the speakers? Sometimes when I listen to music on iTunes I will then get a screeching sound for a few seconds then it will go off.
View 24 Replies View RelatedI bought a new iMac a couple of weeks ago, it's my first alu one but I've had two of the white plastic ones before. The sound from the internal speakers in my old iMacs is pretty acceptable for day to day usage (not playing music of course), but the new one sounds horrible... extremely tinny. So is this just what they're all like these days? If not I guess it's got some issues:-/
View 3 Replies View RelatedIs there a way to tell if/how my speakers are damaged? I have 24" aluminum imac (bought December 2007, whichever model that is), and I was using the internal speakers (I don't normally do this). I was playing an avi file (xvid / mp3 encoding) on VLC.app, and i struck the space bar to pause it. Instead of stopping, my comp emitted an extremely loud "beep" sound at around 400 Hz, and ever since the audio has been weird. At first it was sorta/really scratchy and broken and a little diminished in loudness, but now it is very quiet, playing sounds at around 1/4 the normal volume. What the hell happened to it?
View 6 Replies View RelatedAfter re-arranging my set-up, I suddenly have no sound from my external speakers (JBL Creature II). After the first panic, I figured I would try with my MBP. Odly, they work just fine with that. Then i tried with my headphones from my iPhone - no sound at alle. I?ve resetted PR-RAM (twice), and is now stocked - and pissed.
View 8 Replies View RelatedI know that there's a headphone output jack and an audio input jack on the iMac. Is there anyway to hook up my 5.1 Logitech speakers to the iMac? What kind of adapter would I need or is it even possible?
View 1 Replies View Related