My Airport Extreme and Airport Express are set up on a WDS network. Similar to what I read here [URL]. My PowerBook G4 gets a data rate of only 11-36. Is that normal? What range should I be shooting for? Why does it fluctuate? I looked in System Profiler but didn't see anything to indicate the capabilities of the Airport Card in terms of data rate...
View 1 RepliesI have 3 macbookpros connected to a mini mac server via ethernet. I have the cables and hub to set up a firewire network. I'm wondering if having two networks will increase my connection speed?
Info:
MacBook
Pro, Mac OS X (10.7.3), Server
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have a slow network issue. I'll try to make it as simple as possible.
1 MacBook Pro
1 Airport Extreme
1 Airport Express to Extend the Network
The network to my living room was slow, so I added the Express to extend the network. When connected through the Express, with a Time Machine backup, I'm getting about 500K/sec transfer speeds. When I move the laptop away from the Express and close to the Extreme, the network works much faster, about 5MB/sec. I don't understand why the network is so much slower when using the Airport Express as a network extender. Is the speed difference normally that much? If it's not supposed to be, is there anything I can do?
Here is my situation. I am a network newbie. I bought a Airport Extreme (2008 model without dual band & guest networking) and have it setup with my ADSL broadband modem. I bought it so I could use the high speed N to connect to my Apple TV. It replaced a Linksys WRT54G.
My concern is this. We have another laptop in the house which only has Wireless G. It is connected most of the time to our network, so I presume that it will be slowing the speed of my Extreme to G levels.
Can I connect my old Linksys G router somehow to my network to create a seperate Wireless G network to access the internet. The older laptop can be at G speeds and my Extreme network remaining at N speeds ?
Maybe an easier option is to buy a N USB adaptor for my laptop but I don't want to buy something if I can use my current equipment.
I've got a mid 2009 MBP 2.66 and maye around 2 weeks ago I started ripping my DVDs with handbrake and I was getting like 100 fps... Now however I'm only getting 30 or less sometimes and it's only using 38% of the CPU whereas before it was using like 90-95%. I haven't changed anything.
View 6 Replies View RelatedAnybody got anything good or bad to say about this?
What are the transfer rates like on Firewire 800?
At the moment I'm only running iTunes, HelTweetica and Safari, but my memory/CPU graphs are really high and jumpy. Is it supposed to do this or am I just being too paranoid?
View 5 Replies View RelatedHas anyone tried running L4D2 in BootCamp? I was thinking about taking a punt on the original then I noticed that 2 was out. My Macbook runs Bioshock at medium settings, not the highest of frame rates but it's perfectly playable, but I'm not sure if it'll be able to handle L4D2. (Core2Duo 2ghz, 4gb DDR3, Nvidia9400M, XP 32-bit sp3).
View 4 Replies View RelatedI have a "My book Pro" 250 GB external hard drive spinning at 7200 rpm. This thing is dog slow. It takes about 5 to 10 seconds to copy about 2 megabytes. I have another drive that copies about 160 megabytes in about 5 seconds. I called Western Digital (the maker of the "My Book Pro") and they said that USB 2.0 transfer rates are about 2 MB a second! That is not true but he insisted. My question to you all is how can i win this argument with them? Do you know a formula that would give me real world numbers. In other words how to translate 480 megabits (the USB 2.0 transfer spec) into megabytes? Ive searched the net and cant find anything. Its messed up cause both drives have basically the same specs. Ive even tried reformatting to every possibility, ive switched cables from the fast drive to the slow drive. Nothings working. Im gonna call WD back tomorrow but i wanted a way to talk about what could honestly be expected from USB 2.0. I just cant believe that USB 2.0 tops out at 2MB a second. And to top it all off, todays call ended up with me getting disconnected so i called back and guess what, they were closed...that guys a DOUCHE. I really cant put my faith into Western Digital after this. Are there drives that are geared more towards professionals seeking performance and reliability?
View 5 Replies View RelatedI have a printer attached to my desktop running Win 7 and sharing is enabled and my other computers can print to it.Is it possible to set up my MBP to be able to print over the network using this printer?
View 3 Replies View Relatedhow can I get network data type: ip, gatway, sub mask, and DNS on the Mac. windwos system and so go on and put cmd ipconfig / all adiquirr how can this data in mac book pro XOS.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I've got a Satallite dish system and two routers. I have router B plugged into Router A. Router b Everything is disabled, DNS, Gateway, **** like that, including DHCP. Router A has DHCP enabled, MAC Address Filtering, and DNS and Gateways for the dish system entered. I'm running this setup for my little out post in Iraq. The dish is plugged into the "uplink" port in back of the router, Both Linksys, btw. So I've got 30 people or so on this router, and some one, i fear is passing alot of crap and hogging all the network bandwidth. I suspect SpyWare/Adware of Virus problem on one or two machines. Is there anyway to setup my Mac or a Windows Machine to accept all the data through a network card, and then pass that data up to the satallite dish? I just need to see who's sending all this data and the Linksys logs are crap.
View 3 Replies View RelatedVery new wth mac. Got my first power mac G5 running OS x 10.5.8. I want to add second hard drive. I took the 320GB hard drive out of my Dish Network HD DVR receiver. Tried to erase the data from the drive by using Disk Utility and did not go through. It detect the drive but show 0 byte. Does anyone know what can I do?
View 4 Replies View RelatedI am wondering if I am getting a good transfer rate on my time capsule. (Using leopard). If I alt (option) click on the airport icon on the top of the screen, I can get details to my network. One of the details is transfer. I am assuming this is the speed of my network. Do you know what this is measured in? When I have the time capsule as a G router I get a transfer of 130. When I have the TC as an N router, I get a transfer of 200 - 264. Can anyone tell me if these numbers are good, or do I need to do something to get the numbers closer to where they should be.
View 2 Replies View RelatedI have recently upgraded my wireless network to N+ using a Belkin Modem Router. Security is WPA2-PSK, and MAC access is disabled. All MacBooks (Leopard & Tiger), PCs (XP) and iphones connect without any problem, however my daughter's PowerBook G4 running OS X 10.4.11, and with the most recent Airport software, can't connect to the network. The password prompt when selecting the network only allows for entering a WEP password.
View 13 Replies View RelatedMy problems are getting bigger and bigger:
1. I could not activate my airport card after installing 10.6
2. I erased all data in system configuration as other threads told me
[URL]
3. Then my MB said that there is no airport card installed (but it is)
4. After that I tried to reinstall 10.6 but DVD stopped loading and said it interrupted
5. Now I�m even not able to open network preferences! It loads, and loads, and loads...
6. I installed 10.6.1 but nothing happened
I feel like snow leopard (and my attempt to clear the situation) killed network on my MB-Pro.
I have a linksys wrt610n wireless router that isn't set up yet. You can attach USB drives to the router to use as a nas. I can't find if time machine will use it or let me use a drive attached to the router for my backups.
View 3 Replies View RelatedI'm running the latest iStat Menus (2.0) on Snow Leopard 10.6.2. All the displayed data shows just fine with the exception of the Network (bandwidth) menu. The graph does not reflect bandwidth being used and the "KB/s" displays a constant "0.0KB/s." I've tried rebooting and I've also tried manually selecting "Airport" in the General Settings in iStat Menus' Preference Pane.
Does anyone know how to fix this?
(iStat Pro, the widget version of this program, displays the bandwidth data though.)
I'm trying to use my work laptop at home. I can get it to connect to my Airport network, but it can't see the internet. I'm using WPA for authentication on the Airport.
View 5 Replies View RelatedI want to get an airport extreme base station to replace an old Belkin router that I use now.I have Virgin broadband and I currently connect three MBP laptops and an iphone via wifi and a Mac Pro and an Xbox 360 via ethernet to the Belkin, which is connected to the Virgin modem.The Mac Pro and one MBP also run Windows 7 using Bootcamp.I also have an old PC upstairs running windows xp that connects via wifi using a Belkin USB N adapter.All of this works fine now, but it's a bit slow due to the old router which is only pre-N.
View 3 Replies View RelatedI have an Airport Extreme (goes up to N) as my main router, and I'd like to extend my signal with a Linksys router that is a/b/g (no N support) and maybe an a/b/g Airport Express. Is this possible? Will I have to downgrade my network to G? Also, how do I go about doing this? My plan is to plug them into Ethernet spots throughout the house, but I don't want to have 3 different networks, so how do I make them wireless extenders as opposed to standalone routers?
Would it be worth it just to spring for a new Airport Express (that supports N)? If I do that, do I need to plug it into Ethernet to extend my signal, or will it be able to pick up the signal wirelessly and then extend it?
I keep noticing that my MacBook keeps scanning for the network I'm currently signed on to. Is this behavior normal or should I take it in to the Mac store.
View 24 Replies View RelatedI recently got a PowerPC G4 from a family member and reinstalled Mac OS X 10.5. I did this without the Airport Extreme card installed. After installation I put the card in, and after booting up I thought the card would be recognized. I was wrong. Any suggestions besides that the card might be bad, that I can do to fix this? The card works on other machines.
View 1 Replies View RelatedBack when I did this last time I found some detailed instructions, but of course I didn't bookmark them. I now changed the channel and now I lost the connection to the second one, which is only used for music.
I have a WPA/WPA2 password and an restricted access list.
We're on Leopard.
Im a Little bit of a Nooby when it comes to this
How to Set up a new network with my airport express
How to Set up in What is in the Screen Shot
I have a Time Capsule as my main wifi router and have extended it to my upstairs using an Express.
View 1 Replies View RelatedIs this possible? I use my wireless connection at home and at school. In home I use google dns however in school I cannot use any dns it is not allowed. For this reason I add and delete dns adresses everytime. It is quite boring. Is there a way or application that allow me set different dns adressses for different network connections?
View 3 Replies View Relatedi'm using a MacBook Pro and Ableton Live 8, for those familiar... I have to create an ad-hoc network to get some apps like Liine apps working with my other Apple devices. Liine has some very clear and simple videos, as some i saw on Youtube. The thing is, for some reason, i don't have the AirPort option in my settings. I downloaded AirPort Utility 6.0, but it doesn't find a network or i don't know what.
Info:
iPhone 4
Lately I've been noticing that my Airport disconnects about every 10 - 15 mins or so and then reconnects after it searches for a network, which is mine. 99% of the time I'm sitting right in front of my router. I've reset the router, rebooted, reset my pram, and the problem still persists. This issue doesn't occur on my girlfriends HP.
View 2 Replies View Related