OS X :: Can Print Data Using Another Computer Over Network

Sep 10, 2009

I have a printer attached to my desktop running Win 7 and sharing is enabled and my other computers can print to it.Is it possible to set up my MBP to be able to print over the network using this printer?

View 3 Replies


ADVERTISEMENT

OS X V10.7 Lion :: Can't Print On Canon Ix4000 Connected To Xp Computer At Windows Network

Apr 23, 2012

Trying everything from installing ix4000's driver to CUPS driver and so on. The printer works fine when connected to my MacBook Pro but when trying to print on windows xp network.. nothing happens.

Sometimes it says not authorized some time it keeps on trying. 

When adding a printer I choose windows and I see it and can add it . The driver is available and everything works fine....But it doesn't print or it seems MBP can't send information to that computer which has the printer. The printer on that computer (XP) is shared .  

I have a Dlink  DIR-615 router and we all are connected to it. Should I follow a defined procedure or what? Idon't know what to do . I even couldn't print a single page..

Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.2)

View 3 Replies View Related

Share Wifi Data Between IMac And Windows Based Computer On Wifi Network?

May 17, 2012

I have an unsecured wifi network at home and need to easily share photos between computers. I have an iMac and a couple window based computer.Is ther an easy way instead of using a thumb drive?

Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3)

View 1 Replies View Related

MacBook :: Can't Print On Network

Dec 5, 2014

I have 3 MACs in an office with a bunch of Win PCs. I have 3 network printers. The Win PCs will print just fine. The MACs will not print. The drivers install and the MAC sees the printer. Can check toner and ink levels and the MAC thinks the data has printed. But nothing comes out.

Info:
MacBook Pro, OS X Mavericks (10.9.5)

View 1 Replies View Related

MacBook :: My HP Printer Says 'sending Print Data' But Nothing Prints

Jun 16, 2012

I'm trying to print a legal size 4 page document. The first page printed then the printer stopped.  I've tried repeatedly to print page 2, but it never gets beyond the 'sending print data'. I tried deleting the job but it didn't go away. I finally had to shut down my MacBook and the printer, then restart them and the job was gone. But I still get the 'sending print data' when I try to print page 2.

Info:MacBook, Mac OS X (10.6.8), This is not a wireless printer.

View 1 Replies View Related

OS X :: Can't Wirelessly Print On Home Network

Jun 13, 2010

he has DSL internet service. I'm not sure what modem he has or what wireless router he has but I know they're are not Apple's brand. He told me that he has the iMac set up as a print server. When he gets out his daughters Blackbook he cant get it to print wirelessly through the wireless network, he told me he has to plug the printer into the Blackbook to get it to print. I'm guessing he is doing this via USB cable.

View 1 Replies View Related

OS X V10.7 Lion :: Can't Print To Network Printer Over VPN

Feb 16, 2012

I have a networked printer in my home network. I also have a (working) PPTP VPN set up to connect to that home network while on the road. When I open the VPN tunnel, I can adress all devices on the network, including the printer. I can ping it as well as open its Web front end (via Safari). The only thing that doesn't work is: I can't print over the tunnel! I've tried turning on "send all traffic over VPN", but that didn't help. Some research on the web seems to indicate that the solution lies in an option "Exclude Local LAN from Tunnel". This, however, is not an option for the built-in PPTP client in Lion. 

Info:
iMac / MacBook, Mac OS X (10.7)

View 4 Replies View Related

OS X :: Computer Name Keeps Changing / Computer Name X Already Exist In Network

Mar 24, 2009

My computer name always keep changing with a message like "computer name X already exist in your network and your computer name is now X(2)". I have to change the computer name back to X, or the computer will be rename to X(3), X(4) .... etc. I did not change anything in my network.Is there any way to stop this?

View 5 Replies View Related

Software :: Deleting Computer To Computer Network?

Nov 19, 2008

I accidentally set up a computer to computer network and I cannot figure out how to make it go away. I also tried to password protect it, to at least lock it down, but the password is removed from the network as soon as someone logs on (and doesn't require a password to do so). Something is fishy, to say to least. I was told to go into my preferences (through Library) but I don't know what to make of the omnioutliner files. How do I get rid of this network?

View 1 Replies View Related

OS X :: Cannot Print From Snow Leopard To Network Printer

Sep 7, 2010

So I'm trying to print to a network printer, connected to a Vista PC. My Brother (windows fanboy) is able to print just fine through his wireless PC (Win7) but I can't get my head around why I cannot. I saved a webpage that helped me out before (used on Leopard) which use to work but it no longer work
http://forums.macrumors.com/showthre...print+to+vista

View 14 Replies View Related

MacBook Pro :: Network Printer Not Print Over Wireless Connection

Oct 9, 2009

I bought an Epson C2800N which is a network laser printer. It is connected to my router with "ethernet" cable. I am able to connect to my printer over cable connection (when i have my MPB network connection with "ethernet" cable) but when I use the wireless connection (airport) I can't connect to my printer. It happens with my MBP17 and my bro's MBP15'.

View 5 Replies View Related

OS X V10.7 Lion :: Possible To Print Color Over Wireless Network With HP Printer?

Apr 15, 2012

My hp printers will only print b+w over my network. My 9650 is too old I guess there are no drivers from hp but my 6980 has lion drivers.

Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)

View 2 Replies View Related

Hardware :: Setting Up A Wireless Print / Hard Drive Network?

May 31, 2009

I'm trying to make my laptop as mobile as possible and I'm wondering what I need to buy to accomplish this.

I would like to be able to access my external hard drive [s] wirelessly. I currently have three external drives, and I would also like to print wirelessly [which may be a problem because I have the Epson 595 ].

What would you recommend I purchase to make this work? Do I need a second laptop to run as a 'server' or can I just get something like the AEBS or can I use my existing Linksys router somehow?

View 6 Replies View Related

OS X :: Computer To Computer Network Disappearing?

Mar 19, 2010

I have an iPhone and when I'm in my house I like to use wifi from my Mac. I'm running leopard 10.5 osx. I go to AirPort, create a network and I see it on the mac and iPhone. After I turn the computer off and back on it's gone. Is there a way to create a network that will not disappear?

View 4 Replies View Related

OS X :: Computer-to-computer (ad Hoc) Network Not Saving?

Aug 3, 2010

I have a unibody MacBook late-2009, latest update of SL 10.6.4.

I am attempting to use a computer-to-computer network from my MacBook to my iPod Touch 3G to use an application called TouchOSC which controls Ableton Live on my Mac.

I can Create Network just fine. It sets up the network inbetween my Mac and iPod perfectly. But once I disconnect from the created computer-to-computer network, that network disappears like it was never created. To use computer-to-computer again I have to re-create the network all over.

All of my other networks are stored just fine and I have no other problems with my house Wi-Fi or any others. I have reset my Network Preferences by deleting the SystemConfigurations files and still nothing doing about the computer-to-computer problem.

I am not sure if this is desired behavior, and if it is, is there any way I can save the network I created for later use? Setting it up every time is painful, I want to use it nearly everyday for music.

View 1 Replies View Related

Hardware :: Unable To Print From Wireless Network / Problem In Communicating With Printer

Jan 17, 2010

I'm trying to get used my first iMac, and I'm having a bit of trouble printing from my wireless network. I have an HP Officejet 6210 that I have been using for the last couple of years with my Windows computer. I'm trying to print off of that through my network, but I keep getting this error

"There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again."

I have printer sharing turned on through my Windows computer since the printer is connected directly through my windows computer. My other Windows computer that I have at the house can print through the network, but I'm having problems doing so with my iMac. I have the right driver selected through system preferences/print & fax, but it just won't print.

Any suggestions about what I'm doing wrong, or is there something I'm missing?

View 15 Replies View Related

MacBook Pro :: Use As Wireless Router - Error "creating Computer - To - Computer Network"

Apr 26, 2008

I have a MacBookPro that I use in my room connected through ethernet. I am at university and they have only allow one machine to connect to their wi-fi that is available across campus, through mac address filtering. I also have an iPhone which I would love to use wi-fi on, at least while I am in my room lounging around and such. Anyway, the point being, can I use my MBP (connected through LAN) to act as a router so that my iPhone can connect to it? Essentially create a wireless network, so iPhone would find it and I could go online on it via wi-fi?

I tried going on Airport and clicking on "Create a network" (w/o a password), but I get an error saying "There was an error creating our Computer-to-Computer network." It doesn't say much else -- is there a better way of doing this?

View 14 Replies View Related

ICloud :: How To Print Calendar Remotely From Computer

Feb 1, 2012

If I'm remote from my computer and log on I want to be able to print my calendar, but the Safari command doesn't display the calendar.

Info:
iCloud, Mac OS X (10.7.2)

View 1 Replies View Related

OS X V10.5 Leopard :: Set My Computer To Print From Us Legal To Letter?

Jun 2, 2012

How to set my apple computer from us legal to us letter settings?

View 1 Replies View Related

OS X Mavericks :: Print Icon Tends To Stay On Dock After Print Job Is Done And Disorder Print Queue

Jun 28, 2014

I have recently upgraded from Snow Leopard to Mavericks and am now having problem with my hp 4500 office jet printer. The print icon tends to stay on the dock after the print job is done and then mess up the print queue. Even worse if I forget to cancel it manually then when I put the computer on 'sleep' the printer starts up again and the whole job is rerun unless I get to cancel it quickly on the printer!  

It does not always do this (the print icon disappearing as it should do), but for 90% of the time it does. 

View 3 Replies View Related

MacBook Pro :: How To Get Network Data Type

Feb 17, 2012

how can I get network data type: ip, gatway, sub mask, and DNS on the Mac. windwos system and so go on and put cmd ipconfig / all adiquirr how can this data in mac book pro XOS.

Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)

View 2 Replies View Related

Hardware :: AirPort Data Rates On WDS Network

Mar 19, 2010

My Airport Extreme and Airport Express are set up on a WDS network. Similar to what I read here [URL]. My PowerBook G4 gets a data rate of only 11-36. Is that normal? What range should I be shooting for? Why does it fluctuate? I looked in System Profiler but didn't see anything to indicate the capabilities of the Airport Card in terms of data rate...

View 1 Replies View Related

Windows On Mac :: Setup To Accept All Data Through Network Card

Mar 25, 2009

I've got a Satallite dish system and two routers. I have router B plugged into Router A. Router b Everything is disabled, DNS, Gateway, **** like that, including DHCP. Router A has DHCP enabled, MAC Address Filtering, and DNS and Gateways for the dish system entered. I'm running this setup for my little out post in Iraq. The dish is plugged into the "uplink" port in back of the router, Both Linksys, btw. So I've got 30 people or so on this router, and some one, i fear is passing alot of crap and hogging all the network bandwidth. I suspect SpyWare/Adware of Virus problem on one or two machines. Is there anyway to setup my Mac or a Windows Machine to accept all the data through a network card, and then pass that data up to the satallite dish? I just need to see who's sending all this data and the Linksys logs are crap.

View 3 Replies View Related

OS X :: How To Erase Data From Hard Drive? - Dish Network HD DVR

Apr 4, 2010

Very new wth mac. Got my first power mac G5 running OS x 10.5.8. I want to add second hard drive. I took the 320GB hard drive out of my Dish Network HD DVR receiver. Tried to erase the data from the drive by using Disk Utility and did not go through. It detect the drive but show 0 byte. Does anyone know what can I do?

View 4 Replies View Related

OS X :: Usb As Network Attached Drives / Backup Data Via Time Machine?

Apr 12, 2009

I have a linksys wrt610n wireless router that isn't set up yet. You can attach USB drives to the router to use as a nas. I can't find if time machine will use it or let me use a drive attached to the router for my backups.

View 3 Replies View Related

Applications :: IStat Menus - Does Not Display Network/bandwidth Data?

Feb 10, 2010

I'm running the latest iStat Menus (2.0) on Snow Leopard 10.6.2. All the displayed data shows just fine with the exception of the Network (bandwidth) menu. The graph does not reflect bandwidth being used and the "KB/s" displays a constant "0.0KB/s." I've tried rebooting and I've also tried manually selecting "Airport" in the General Settings in iStat Menus' Preference Pane.

Does anyone know how to fix this?

(iStat Pro, the widget version of this program, displays the bandwidth data though.)

View 1 Replies View Related

OS X :: Computer Sending Out Data?

Jul 25, 2009

I just got a macbook pro and I installed istat in the dashboard. I noticed that my computer is sending out a lot of data, for example istat says that it is sending out 35 kbs with a total of 258 for today. My question is what is my computer sending out and should I be worried?

View 1 Replies View Related

IMac :: Transfer Data From Last Computer?

May 7, 2009

I'm about to order the 2.93ghz 24" imac with radeon 4850 and I was just wondering what the fastest/easiest way to transfer all the data i have from my current pc would be.

View 8 Replies View Related

Intel Mac :: Need To Transfer Data From Old Computer To New One

Mar 14, 2012

I have a iMac 6,1 (24") and just upgraded to a new 21.5" iMac; with it I bought a thunderbolt cable without realizing that my old iMac has no Thunderbolt port. My question is, how do I transfer all data from my old to my new, and is there an adapter for the Thunderbolt cord to connect to my old computer?

Info:
iMac (24-inch)

View 3 Replies View Related

Intel Mac :: Transfer All Data To A New Computer?

May 26, 2012

I currently have a Macbook Air and an iMac, but looking to sell them and purchase a new Macbook Pro when they are released after the WWDC :-) along with a Thunderbolt Display screen. 

Info:Mac OS X (10.7.4)

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved