I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
View 3 RepliesI have a used G4 from a university surplus materials auction. The cpu had been purged of all programs and operating system. I attempted to install Tiger but installation stops at designating drive location.
View 1 Replies View RelatedHow do I launch disk utility from the Snow Leo install disk?
View 2 Replies View RelatedI was excited to get my hands on our family's 'family' copy of Snow Leopard to install on my MacBook running Tiger 10.4.11... I'd checked out tutorials on youtube (http://www.youtube.com/watch?v=loFUyDjCbK8) on how to clean install Snow leopard onto a blank hard disk, and was all set to bring my OS up to date...
I inserted the Snow Leopard DVD and restarted and immediately held down the 'c' key and then... 3 minutes or so of the loading icon ticking later and the DVD was rejected and I only had one button to click on, 'Macintosh HD' to start up from.
After re-trying several times I thought it was because I was trying to do it with Snow Leopard on my MacBook running Tiger so I tried restarting this time with disk 1 of the Tiger DVD. This was rejected too!
So currently I am not able to wipe my hard disk as far as I know because I can't get to this screen to start the process (unless it's possible to do from within Tiger and if it is then I'm just worried that if I wipe it and I can't restart from the DVDs then I'll be in even bigger trouble).
Has anyone encountered problems like these and does anyone know of a solution? I've never had any problems with my DVD drive in the past which leads me to suspect it's not because of that.
I need to boot into Disk Utility to repair my OS X partition but don't have my Snow Leopard install disc with me. I tried using a Leopard disc from my previous computer but got a gray screen when I tried it. Is there a way to create a new CD that will allow me to access Disk Utility from startup?
View 5 Replies View RelatedMy HDD died recently and I cannot get booted into OS X. It just hangs on the grey screen with the apple. I am (was) running 10.6.8
I am having a lot of trouble trying to boot from my install DVD. First of all I purchased a new HDD which came with Lion pre-installed on it. This worked fine, except when I tried to restore my latest time machine back up it used up 200GB of my disk space but nothing is restored? No doucments or music anywhere, photos, nothing. There is no change at all except half my storage has disappeared. I had posted another question on here and the reply said to use setup assistant, which I could not locate in Lion?I then tried to install Snow Leopard back over Lion but it would not let me. I tried to boot to the install disk but it just hung at the apple screen again.
I gave up and bought another brand new HDD but it won't recognise it on boot up. I just get a flashing folder with a ? in it. I tried to boot into the install DVD and again it wouldn't do it.
I then went back to my original HDD, and tried to boot to the install DVD from that (I hadn't tried this first off as my install disk was elsewhere and I purchased the Lion HDD as a stop gap measure) and it STILL wouldn't do it? This is now the original disk with the original install DVD (10.6) issued with my macbook pro when I purchased it and it will not boot to the DVD. Why why why?! It is almost enough to make me bin the lot and switch to windows.
Info:MacBookPro, Mac OS X (10.6.8)
1. To grab all the files I need/don't want to lose (photos, music, documents, etc.)2. Then completely erase the 500GB HD so I can then install it into the new Macbook Pro and install Leopard.(I'll then externally connect the 160GB HD that came w/ my Macbook Pro and add the files I've already copied into that 160GB HD into the 500GB Leopard installed HD in the new Macbook Pro)So, currently my 500GB HD is connected to my Macbook pro and I want to completely erase everything so I'll then have a completely clean hard drive, to then install into the Macbook Pro, add the installation discs and install Leopard into the 500GB HD.
View 14 Replies View RelatedI recently upgraded my Macbook Pro to Snow leopard. About 4 days later, my Mac crashed. When I tried to restart, it came up with the grey screen with apple logo and spinning disc. I have tried all of the resets. I then decided to try and re-boot from the SL install disk. When it asked me to choose a destination volume, however, there was none available. I tried disk utility, but there was no disk available there either. I then went back and tried to use the original install disc that came with the Mac...same results. It appears that my internal hard disk has disappeared. I wonder if i am going to have to replace the hard drive?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
I purchased my Macbook Pro just over a year ago with Tiger as the OS. Since then i have purchased leopard with a buddy and installed it on my computer. And lent my Tiger OS install disk to a friend of mine. Im trying to partition my disk with bootcamp but it errors and tells me to fix it using the Disk Utility.
View 1 Replies View RelatedAnyone knows if the install cds shipped with the macbook pro C2D are able to install OSX on a PPC mac. Macbook pro install CD to install tiger on a G4 Powerbook?
I installed leopard on it while back but it originally came with tiger. lost the recovery cds. I want it back to tiger. When i put the original tiger dvd in it will say in cannot install the software. so i figured i use TDM to connect it to my imac(running leopard) I used disk utility to erase the HD and did repair disk afterwords. I tried to boot the dvd using the c button on the MB but i would respond and went to the question mark folder.
How can i get tiger back on my MB
please don't ask me why i want tiger back and what leopard off its not really relevant.
iMac-2.66GHz Intel Core 2 Duo - 2GB Memory
After using the Disk Utility - I received this message:
Repairing permissions for Macintosh HD
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Resources/Locum" has been modified and will not be repaired.
When I download a program it downloads into my download folder but when I try to open it it goes straight to disc utility. How can I change this.
View 3 Replies View RelatedSo to make a long story short Just traded my buddy my blackbook and some cash for this 09 uMBP. I ordered an Intel SSD for it that is supposed to be here Wednesday. I figured while i was waiting i could install a fresh copy of OS X on it and get it set up just how I wanted it then use CCC to image it. That way Wednesday when the SSD gets here I can just pop it in and use the image from CCC to load everything up and I would be set.
When I throw the OS X DVD in and click the first icon to install OS it says you have to restart. I click yes and it does. the screen with the apple and the little swirly status icon shows up and both the DVD drive and hard drive are spinning. it hangs here for about a minute and a half to 2 minutes. Then the DVD drive and HDD stop spinning and the screen goes black. like it is going to sleep. You hit the space bar or keyboard and then the HDD and DVD drive start spinning again like it is going to boot up but the screen stays black. both HDD and DVD drive continiue to spin for about 30 seconds then stop. Still all black screen.
durring this time everything is locked up. you cant get the DVD to eject, nothing. You have to hold the power button for a solid minute or 2 and it finally reboots (not a shut down but a reboot).
As soon as it reboots if you leave the DVD in it does the exact same thing as above. Apple logo for about 2 minutes then black screen. If you hit the Eject button IMMEDIATELY as the apple logo comes on it will eject the OS X DVD and boot normally. I have done it about 6 times now and it just keeps haning if the DVD is in the drive.
Since installing 10.6.3 my trackpad (i.e., mouse pointer) and keyboard are hanging up for 10 seconds at a time every couple of minutes.
View 24 Replies View Relatedi have encountered an issue on a system with Tiger 10.4.11 where the disk utility and several other utility applications will not launch... Also new applications will not install i believe tide to the utilities issues. Has anyone encountered this issue before?
View 1 Replies View RelatedMy MBP was running a little sluggish so I thought it was time to clean it up with a fresh install. All backups & apps have been reinstalled, all software is updated and everything is running pretty smoothly and much faster!!
But I'm having some issues w/ Aperture. I have connected it to my previous library and even have it in the same place as before, nothing is missing. Seems OK.
Now I'm trying to back up to a new vault and when I try to do that, it just hangs or runs extremely slow. When I try to click on the Vault options (the arrow up, red sync icon or the vault settings to add a new vault), this is where it starts to hangs. The menu comes up for 1 second but as soon as I release the trackpad button, the menu goes away. From the File menu, vault options are grayed out.
Anyone have these problems when reinstalling or have an idea on how to fix?
I searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies View RelatedI got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
View 9 Replies View RelatedSearched the archives but no luck so far. My old PB G4 is running 10.4.11. When I installed the OS, I chose not to install iPhoto and iMovie because I didn't think I'd need them on this machine. I'd now like to add them, but am not sure how to do it without wiping the hard drive and starting completely from the beginning. There's got to be an easier way...right?
View 4 Replies View RelatedI try to securely erase big hard drive and Disk Utility in Tiger says Secure Erase. Pass 1 of 7. Estimated time 123 hours
Is this progress bar only for erase 1/7 or for all 7 passes (1-7/7)?
I have no experience with any Apple OS prior to Snow Leopard. My daughter has an old M6498 G4 800 mhz, 60GB machine with a grey screen. Went through the steps listed in Apple Support. Disk repair would not work, archive would not work and ended up having to do the "erase and install" with a Replacement DVD sent to us by Apple. After many updates the computer is now booting up with OS 10.4.11 and Safari 4.1.3 installed.
I have a Replacement DVD of iWork '05 sent by Apple which was previously installed on this same machine before the problem with the "grey screen" and hard drive not working. Attempting to reinstall iWork but the iWork '05 DVD does not display in Finder or Preferences.
Info:
PowerMac, Mac OS X (10.4.11)
I have recently done a Time machine back up of my MB Pro 15" then wiped my hard drive trying to clean it up so I could install Windows 7 with Boot Camp. I had my original Install Disk which I forgot was Tiger, Having used one of my brothers company licenses to upgrade to Leopard but that disk is now with him in another country. So now I can not restore from my Time Machine backup. I have a Leopard Install disk for a Macbook Pro 13" which I also own. Is it possible to use this disk to re-install Leopard on my 15"?
View 3 Replies View RelatedIt is a B&W G3 Desktop rev 1 350 mhz 1GB with 6GB Quantum startup volume with 9.2.2, and an aCard, Maxtor 120GB that is going to have Tiger on it.
Two OSs on Two Hard Drives and one OS on each hard drive on one apple desktop.
The hard drive is connected and the Apple System Profiler on 9.2.2 6GB startup volume detects the aCard and the Hard Drive, but when I select which hard drive to install, there is the original hard drive, and nothing else.
How do I install 10.4 on the Maxtor Hard Drive? Is there a key combination that I have to hold down while it is starting up?
When I get my Mac Mini next week-I intend to replace the HardDrive, do I have to back up what's on the HDD? Remember this Mac is Brand New-And comes with the Install Disc.
Or can I just open the box, install the new harddrive and load up the install disk?
I have a 20" Intel based iMac (model A1224) running Snow Leopard. It is just over a year old and only had the original Apple keyboard and mouse plugged into it. Today when I tried to start it I got only a blank gray screen. I tried all the keyboard combo start-up suggestions in the Apple help screens, unplugging/replugging everything, and booting with the Original disk and the Snow Leopard disk. A couple of those attempts produced a minute of the gray apple logo screen, then back to blank. While the disks were in it did sound like it was trying to read them, but spit out the disks after about 5 minutes.
View 7 Replies View RelatedI've just installed the BRL-CAD application and it need a command line input (/usr/brlcad/bin) to the System - see below. I am not that familiar with the commands although no problem getting into the Terminal. I just don't want to screw this up. I am running a Mac Mini, 2.66 Ghz Intel Core 2 Duo, 4 GB RAM, OS 10.6.5. I need some step-by-step info in getting this embedded and the application up and running.
Setting Up the Path:
Once installed, you will need to add /usr/brlcad/bin to your system
PATH. For Bourne shell users, you can run the following:
PATH=/usr/brlcad/bin:$PATH ; export PATH
For C shell users, this should do the same thing:
set path=( /usr/brlcad/bin $path ) ; rehash
when i insert the SL upgrade dvd (9.99 version), and i boot up from the dvd, i get this:
and i cannot select disk utility to wipe my drive. not sure what else to do.
I just obtained a PowerPC G4 Tower, but there was no hard drive in it. Because of this, I put in an older 20 gb hard drive I had just laying around. It is from an old Windows PC I had, but I don't know if thats a problem or not. Anyways, when I try to boot from the Tiger disc, nothing happens. I have tried holding down C when I turn the mac on, but that doesn't help at all. I just always get the mac icon with a question mark in the middle of the screen. I am just wondering, is this anything to do with the PC hard drive I put in the mac? Or is there something else that I am doing wrong? I just want Tiger to be installed on the computer.
View 13 Replies View RelatedRecently my parents just bought a Macbook with Leopard on it. I own a three year old Macbook that runs Tiger. I saw this as a chance to upgrade to Leopard. I tried to install Leopard on my Macbook but it says that it can't install on my machine. I've searched various places but I've gotten vague answers. Is it because the disk is hardware specific (From what I've heard) or is it something else and I'm not getting it?
View 8 Replies View Related