I try to securely erase big hard drive and Disk Utility in Tiger says Secure Erase. Pass 1 of 7. Estimated time 123 hours
Is this progress bar only for erase 1/7 or for all 7 passes (1-7/7)?
I have an external hard drive that was used on a PC. I want to use it on a Mac. I went into disk utility and did an erase. (Extended Journaled and in security options changed it to zero out data). I can now use it on the Mac how ever it is telling me that there is 54.1 MB of used space. I want to have access to this. How do I do it?
View 4 Replies View RelatedI have a hard drive with about 250 gb of film and music on fbut it's formatted as HFS+ which windows cant read! I need to partition the drive to make windows be able to read at least a portion of it. But If I run disk utility and create a partition will it erase the info I already have on there? I don't have this data else where so I hope it wont!
View 6 Replies View Related1. To grab all the files I need/don't want to lose (photos, music, documents, etc.)2. Then completely erase the 500GB HD so I can then install it into the new Macbook Pro and install Leopard.(I'll then externally connect the 160GB HD that came w/ my Macbook Pro and add the files I've already copied into that 160GB HD into the 500GB Leopard installed HD in the new Macbook Pro)So, currently my 500GB HD is connected to my Macbook pro and I want to completely erase everything so I'll then have a completely clean hard drive, to then install into the Macbook Pro, add the installation discs and install Leopard into the 500GB HD.
View 14 Replies View RelatedSo I may have one of the Seagate hard drives that are failing badly. Haven't heard back from Seagate to see if my drive and firmware is bad, but since I just bought the drive, I'm thinking of returning it.I'm in the middle of a 7 Pass Secure erase on it (1TB). Do people feel comfortable returning a drive after doing that erase? Or should I just forget about it and destroy the drive and chalk it up to a loss?
View 20 Replies View Relatedi know that diskutil has alot of commands and im not sure how to use them, i would specifically want to know how to use eraseDisk properly. Or is there any other way to clean install tiger without using darwin? I know eraseDisk gives me a format to use but i never get it right for some reason. diskutil eraseDisk "Journaled HFS+" MacintoshHD bootable /dev/disk0 -- this works i got it right now but it gives me this error: could not unmount disk for zeroing
View 7 Replies View Relatedi just erased my external hard drive through disk utility my accident. I had VERY important files and the 1tb was full.
View 3 Replies View RelatedI have an external 750GB hard drive that I previously formatted as FAT 32 because I wanted to be able to plug it into Windows computers as well. I was not very thoughtful at the beginning and I just created one big 750GB partition. I currently have 450GB used and about 300GB free.
I would like to create a new partition in the free space without losing the data I have in the disk, and format the new partition as Mac OS Extended to use it for Time Machine backups. Presumably Disk Utility can do it, but when I go to the "Partition" tab it says "This partition cannot be modified" and the "+" sign below it is grayed.
The hard drive is a 1TB Western Digital my book I bought it in January I think. I tried to format it to Mac OS Extended (Journaled) when I got it but for some reason every time I try to erase the part thats named disk3s2 or partition the main one it stops a little before half way through. I don't think its the hard drives fault so I called apple about it one day and they helped a little but it didn't work. Thanks in advance if you can help me. Also a few times I waited about seven hours for it while I was at school and when I came home it didn't move.
View 8 Replies View RelatedI have a 1/3 full external drive that is currently formatted for MAC OS External.
I want to partition the drive in half and use the 2nd partition for Windows FAT32.
However, when I try to do this with Disk Utility it does not give me the FAT32 option.
I have a MacBook Pro and am going to sell it to upgrade to one of the newer MacBook Pro's. What is the best way to securely erase it before selling it? I have a lot of work data that I don't want to chance anyone being able to recover. In the past I had a windows program which conformed to DOD security for erasing. Is there anything like that I can do to securely erase my mac hard drive?
View 2 Replies View RelatedI'm having a pretty serious problem. I attempted to erase the free space on my HD, as I do from time to time, except this time it appeared to hang/freeze at the end, when it gets to the part where it creates a temporary file. I waited for several minutes and it didn't move. I tried clicking the skip button, but that did nothing either, so I force quit Disk Utility.
The problem is, it left the disk at "Zero KB" of free space, effectively making my computer inoperable. I was in the process of studying for a huge exam tomorrow, and am currently flipping out.
If it matters, I'm on a Macbook Pro 2.33 GHz Core 2 Duo, running 10.4.
I really don't want to have to reinstall the OS and import the old files, but my real fear is that I will have to do a fresh install of the OS.
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
Cant erase hard drive because cant "unmounted disk"...My hard drive crashed about a month ago, and i used a program called data rescue to clone hard drive. when i put it in mac it will not load. now all i want to do is erase the drive and install Yosemite as new mac. but cant install or erase the hard drive.
Info:
MacBook, Mac OS X (10.7.5)
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedAnyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
View 4 Replies View RelatedI'm erasing some partitions on a Mac that's leaving my possession, is Zero Out Data secure enough? To erase everything?
View 6 Replies View RelatedI have a 500G WD external HD, and I used Disk Utility to securely (35-pass) erase it. Now the I cannot do anything to the drive. Cannot erase or partition it. When I try disk utility says the task has "failed with the error: POSIX reports: The operation couldn�t be completed. Cannot allocate memory" Before the drive would show on the desktop as, WD 5000BEV External Media, when I plugged it in. Now it has a message saying that "The disk you inserted was not readable by this computer." Then it gives me three options which are... Initialize, Ignore, Eject. When I click Initialize I am redirected to Disk Utility. Also now in disk utility it says that it is a 2.2 TB WD Media opposed to WD 5000BEV External Media. How does it go from a 500g to a 2.2t It is unformatted and I do not know how to reformat it back to the it was.
View 1 Replies View RelatedI am having trouble erasing DVD+RW discs. When I insert a used disc and try to erase it in Disk Utility, the process seems to complete almost immediately, ending with OS X asking me if I want to mount the inserted blank disc in Finder. However, if I eject the disc and put it back in, everything is still on there. (detail: When erasing, there is usually a short interval where a striped progress bar is shown, after which a "normal" progress bar is slowly filled as the disc is erased. However, for me only the striped progress bar is shown--the "normal" progress bar is skipped--and then OS X says erasing is done.) If instead of ejecting the disc I choose to go ahead and burn something as if Disk Utility has actually erased the disc, I get a laser power calibration error.
View 4 Replies View RelatedI ordered a second hard drive for my powermac g5.Its a 400 gig seagate drive.I power off my machine,unhooked everything and plugged in the drive.
I boot up and the drive isnt showing in disk utility.Is it something i did?
I've got an 8GB Sony Micro Vault Pen Drive that's stopped working. When I opened up Disk Utility it appears but doesn't give me the option to erase.
Can I try doing it with anything else before I bin it and buy a new one.
I am going away traveling and need to back up all my stuff off of my mac for the first time.. (pics, music etc the usual). I brought a WD Elements 500GB External Hard Drive and when I plug it into my mac book (OSx) it appears in finder, and the desktop but I can't drag and drop nothing into it. Apparently I have to format it! So have researched about formatting it, but I don't have "Disk Utility" in my utilities? My Mac was given to me from a friend second hand so i don't have the disks etc to get it. Any other way of formatting my Hard drive or a link to download disk utilities or any alternatives!
View 5 Replies View Relatedthe past couple of days my new macbook Pro (only had it a couple of months) has been really slow to boot, with a grey progress bar that I have never seen before. I googled it, and you all know what i found.
So I ran the disk utility, and selected analyze or whatever the button is, and it said I should load it from the INstall DVD, as the disk needs repairing.
Guess what. The disk cannot be repaired.
An error message about expecting 31 files but only finding 30?
It recommends erasing the disk and reinstalling from scratch.
Now, as far as I can see, apart form the slow boot times, everything else still works. Does this mean that it is just a ticking time-bomb that will break any time, or is just a couple of corrupt files that don't matter?
This is really annoying, I love my Mac, but having to reinstall so soon after purchase?
Apologies if there any other posts on here already, it is late, I am stressed, and would like a nice person to help me out.
I have been reading that the erase feature on OS X's disk utility will not remove file slack. If I erase the entire drive using one of the security options (Zero-Out, 7-Pass, or 35-pass),
View 1 Replies View RelatedI recently installed and uninstalled a few versions of linux on my imac. After installing some versions i realized I was going to need more space, so I went back into mac OSX and have been trying to add a new disk partitions with more GB.
I was making a partition on my USB external drive in order to put a disk image of Snow Leopard on it, so I could boot off of it.
I added a 10GB partition to the drive, and clicked Apply. The following dialogue box came up:
Partitioning this disk will change some of the volumes. No volumes will be erased.
This volume will be added:
"Snow Leopard"
This volume will be resized:
"XXX HDD"
I clicked Partition, and it finished very quickly. I checked Finder, and the entire drive, BOTH partitions are completely empty.
My macbook hard drive crashed, luckily I had just backed up everything. I went and bought a new 320 GB hard drive, I researched and I know it's compatible with my Macbook. I decided to install windows 7 on it first, but the windows 7 installer wouldn't recognize my hard drive. (For the record, my Matsushita superdrive will not read DVDs anymore, only CDs, so I created bootable copies of both my Mac OS X install disk and my Windows 7 install disk, and I've been using a bootable rEFIt CD to boot from my USB flash drive.)
So I booted up the Mac OS X Snow Leopard disk and started disk utility - it recognizes the rEFIt CD, it recognizes the flash drive, but no internal hard drive. The partitioning tool in rEFIt doesn't recognize it either, but I know it's seated correctly because I can hear/feel it booting up with the computer (if i remove the battery and boot with the computer plugged in). I also know it works correctly because I installed it in my girlfriends PC and it recognized it just fine, I even installed Windows 7 on it, hoping the macbook would boot from it.
Can I make a disk image of my current MB Pro (early 2008) and copy it to my new i7 MB Pro to retain all my docs and programs?
I'm selling a hard drive that doesn't work when formatted for Mac so I need to sell it PC format. Will MS-DOS (FAT) work, and does it need to be set to Master Boot Record?
I have a PC I can test it on but I just want to now what to do before I try it out so I don't keep having to switch between computers.
