IMac :: Can't Boot Install Disk - How Install Discs Work
Apr 28, 2010
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
I have a 24" iMac (A1225). I can boot to non-Apple discs (utilities, Windows) and I can even install Windows without any problems. I can't boot to any OS X Install disc however. I have the original 10.5 discs, they don't boot. I have a 10.7 disc that does the same. It starts to boot and makes encouraging noises for a bit but eventually both discs spin down with the Apple logo and the spinning circle which stops.
Just for shiggles I tried to boot a couple of custom OSx86 discs (10.6.3 and 10.6.6). They both booted to the installer. 10.6.3 started installing (crashed half-way) but started to boot from the HDD after I restarted it (it didn't go anywhere of course, just the Apple logo). 10.6.6 finished installing but wouldn't boot after it restarted.
It seems like there's a hardware issue but the fact that I can boot non-Apple discs and even install Windows without issue makes me doubt that. I have also cleared the PRAM (Option-Command-PR) and ran a quick test in AHT (D) without issues.
i have read various threads about this but can't find a cure, here is what's happening:
1) Was running disk utility and said i have a corrupted disk 2) OSX runs fine but i can't reboot into startup disk in order to repair disk 3) Can only boot into OSX now by holding down Option key and selecting OSX 4) Can't use this method to boot into install disk or external drive.
Remedies, I have done the following:
1) Repaired permissions 2) SMC reset 3) PRAM reset 4) Wont allow me to safe boot 5) Won't allow me to boot from install disk 6) Won't install SL disk to try and repair install
I've got an iMac 233 and I'd like to reinstall OS 9. My only problem is that I don't have an install disc. Can I make one i.e. with the system folder or something? Also, the optical drive is a bit flaky so could I install from a flash drive or external HDD?
I would like to clean out my HD and reinstall OS X 10.5.8 Leopard, but I do not have the original install discs. My plan is to buy the Mac OS X 10.5 Leopard universal retail disc from an outside dealer (going for $200+) and also buy additional memory (2GB 533MHz DDR2 SDRAM (PC2-4200)) to help with space.
I am worried about not being able to run QuarkXPress 6.0, Extensis Suitcase X1, Microsoft Office 2008, and Adobe Creative Suite CS3 once I reformat. I do not want to upgrade to Lion because most of these programs do not work or in the case of CS3 very glitchy on Lion.
is this the best route to go? I do not want to buy leopard and the ram, until I know for sure this is the right way of proceeding.
I just bought the new 24" iMac and I looked at the backup discs and they said it could install OSX Tiger. I also have an old iBook G4 I got my moms friend who moved. I know the iBook could handle 10.4 as it has 10.3.9 now but what I was wondering was. If I could install the OS on the iBook from the iMac backup discs. I but the disc in the iBook and it wanted me to restart to begin the installation of OSX but I quickly backed out. Do you guys think If I proceed with the installation it will install smoothly or, should I just forget about it.
I'm purchasing a new MacBook Pro in a couple of weeks and the install discs will be Snow Leopard.
At home I have a 2009 Intel iMac. Will I be able to use the MacBooks install discs to upgrade the iMac or do I need to buy iMac Snow Leopard separately?
I came home for vacation and decided to reformat my imac g5 to get a fresh start. I backed up all my files, took out my leopard retail box, and was ready to go when I opened up the box, and noticed no disc. I have no idea where it went.I have the install discs from the computer when i got it, but it only has 10.4, so id rather not use them. I have the install discs from my macbook pro with 10.5, but I am pretty sure it will not work.So does anyone have any suggestions? Should I just go ahead and install 10.4 until and then just install 10.5 when i find it? (i really hate doing this, I hate having more than one version of an os installed)
So I restarted, hit option until "Macintosh HD" showed up. Then I hit "c" and "Mac OS X Install Disc" showed up. So far so good.
I then selected the CD, and hit enter. It started to boot up and my cd drive started to make whirring noises, so I knew it was all good. And then, it went into the grey screen with the Apple logo in the middle. However, with it taking a long time, I went for my usual jog (it was my jogging time anyways). But when I came back (over an hour later) it was still on the grey screen with the apple logo.
Ok, my WD Raptor is both getting too small, and too slow (long in the teeth) so I sunk down for 2xVelociraptors to use for my boot in RAID 0..
I know how to add drives and do RAID in terms of adding drives for storage, but how can I migrate my OS X, Applications, and Preferences to a new boot drive, much less a RAID 0?
do I need to first install the disks into my case and format them for RAID 0, then install OS X as a boot disk on them, the lastly copy over my Applications folder, Library and Users folder?
Right now I am booted into the GParted live cd, and I am wondering if my computer will even be able to boot into the OS X install disc if I delete every single partition on my HDD. I am going through a roundabout way of removing ubuntu. Will I be able to boot into the OS X install disc and do an install if I delete every single partition, and leave my HDD completely blank and unformatted?
I am unable to get my OS 10.4 Installer DVD to mount or boot my G4, currently running OS 10.4.11, though it mounts and boots other of my Macs and I am able to boot and mount a 10.1 DVD with my current Pioneer DVR-1060 drive. I would like to run a hardware test on my mac as I recently had one of my hard drives die and just want to check everything. So does not seem to be the drive and does not seem to be the DVDs. I zapped the pram, reset the open firmware and ran diagnostics using Applejack and everything checked out okay with my current internal drive.
I need to boot into Disk Utility to repair my OS X partition but don't have my Snow Leopard install disc with me. I tried using a Leopard disc from my previous computer but got a gray screen when I tried it. Is there a way to create a new CD that will allow me to access Disk Utility from startup?
First timer here. I bought a used G4 MDD 1.25 dual FW800 recently. Was pre-loaded with 10.5.6. I thought that I would add a hard drive. After attempting to format, it rebooted to a gray screen with a MacMonitor icon. If I hit "option", I can get it to progress to a blue screen w/ padlock asking for a password. I only remember setting a user password. I believe this is asking for an admin password.
So, I thought that I'd get the 10.5.6 Install disk to reset the password. I can't seem to boot from the Install disk! I've tried holding down the "c" key at startup, (also the "option" key). No avail.
I was excited to get my hands on our family's 'family' copy of Snow Leopard to install on my MacBook running Tiger 10.4.11... I'd checked out tutorials on youtube (http://www.youtube.com/watch?v=loFUyDjCbK8) on how to clean install Snow leopard onto a blank hard disk, and was all set to bring my OS up to date...
I inserted the Snow Leopard DVD and restarted and immediately held down the 'c' key and then... 3 minutes or so of the loading icon ticking later and the DVD was rejected and I only had one button to click on, 'Macintosh HD' to start up from.
After re-trying several times I thought it was because I was trying to do it with Snow Leopard on my MacBook running Tiger so I tried restarting this time with disk 1 of the Tiger DVD. This was rejected too!
So currently I am not able to wipe my hard disk as far as I know because I can't get to this screen to start the process (unless it's possible to do from within Tiger and if it is then I'm just worried that if I wipe it and I can't restart from the DVDs then I'll be in even bigger trouble).
Has anyone encountered problems like these and does anyone know of a solution? I've never had any problems with my DVD drive in the past which leads me to suspect it's not because of that.
running OS X 10.5.8 on a MacBook Pro. Lately my mac has been buggy, and I'm not sure why. When a decent amount of information is processed by any given application, it crashes. These crashes have included Mail, Safari, Photoshop, Foxfire, etc.. even the entire computer has shut down. Using the reset option does not help. I ran Repair Disk Permissions and it always fails. I get messages like "The Underlying Task Reported Failure on Exit". I wanted to try to run repair disk through the install disk but I cannot access it. I have Disk 1 in (Maybe I'm supposed to use 2?).
When booting I tried pressing 'C' and would eventually would get the "must restart" gray screen. I then tried pressing "Option" instead, selected the Disk drive, but the loading screen with the apple just kept going for about 20 minutes and I finally gave up and restarted. There were no longer any disk attempt whirring sounds.
I've been trying to install XP using boot camp, but when i try to partition the disk i get an error message saying disk needs to be repaired using the installation disk of mac os x, i've tried using the application under os x to repair the disk but i still get the error message, so i when i try to boot with the disk by pressing the "c" key nothing happens and the computer boots normally.
My Macbook is starting to get really slow. I've tried Onyx and it told me that the startup volume had to be fixed. But I can't boot my install DVD by pressing "C" in the startup.
I've got a Powermac G5 desktop. I recently purchased a used keyboard for it off of Ebay. The computer was working fine with just a mouse. Shortly after the keyboard was plugged in, I got a kernel panic, and had to restart. I restarted, and immediately got a message saying "you need to restart your computer", and followed by another kernel panic.
Now, I get a kernel panic and "restart your computer" message, even if the keyboard is unplugged.
I was planning to do a clean install of OS X anyway, and figured that since the computer is completely useless at this point, now would be a pretty good time to go ahead and do it. So I tried to boot from the install CD by inserting the CD and holding down the 'C' key. No result -- it doesn't show me the "boot menu", and instead proceeds as usual, to it's "Restart your computer" message and subsequent kernel panic.
So I then tried rebooting and holding down the "Option" key, and managed to get to the boot menu. I selected "Mac OS X Install Disc 1" and clicked the "--->" button ... kernel panic again.
I'm at a complete loss for what to do next. Any help with this would be much appreciated. All I want to do is reinstall OS X.
How can there be a kernel panic from the boot CD? Apple didn't make it where it tries to use the kernel from disk during install did they?
I'm coming from a Linux background, and am not at all familiar with OS X, so forgive me if I've left information out that I should have included. Please let me know if this is the case, and I'll do what I can to provide it for you.
I am trying to install Windows 7 Home Premium 64-bit on my MacBook Pro purchased late 2011 and running Lion. The Windows software was purchased online and downloaded. I then copied the .iso file to a dvd. When I try and install Windows through Boot Camp it doesn't recognize that there is a disk in the drive to install Windows. I sure hope I didn't waste my money. Has anyone installed Windows 7 from a OEM download?
Have an iMac MA877LL that I needed to replace a hard drive on. After the drive is replaced and I run the install from the disk that came with the computer. I get can not install on this computer. I can see the drive from the install disk utilities, partition it (1 Partition, Journaled.) can run verify and repair on it, no problem found.
I'm looking to install a Windows partition on my MB to revisit my Counter-Strike days. Does Boot Camp require a physical disk or can I use an ISO image for the install?
I searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
I am traveling and I forgot to get my Mac OS X install discs with me. I have a Early 08 MBP 15 inches, 2.5 GHz. Will the install discs that came with a white MB be the same for the MBP?
I have a Macbook that was bought new earlier this year and an older Macbook Pro (original Core Duo) running older OS (10.4.11) with iLife '08. Can I use the MB's install disc to update my MBP OS+iLife? I'd like to buy Aperture for my MBP, but now need to update my OS first... guess should have bought Ap 2.0 last year.
Searched the archives but no luck so far. My old PB G4 is running 10.4.11. When I installed the OS, I chose not to install iPhoto and iMovie because I didn't think I'd need them on this machine. I'd now like to add them, but am not sure how to do it without wiping the hard drive and starting completely from the beginning. There's got to be an easier way...right?
I have bought a used Macbook Intel 2.2Ghz 250Gb with 2GB RAM running Snow Leopard. It didn't come with system discs. I have a similar Macbook with a 160Gb HD running 10.5,8 and I have swapped the HDs over. Both machines are running fine. I now wish to reinstall 10.5 on the 160GB HD but when I use my original 10.5.6 system discs it says that OSX cannot be run on this machine.
