OS X V10.6 Snow Leopard :: Cannot Get To Disk Utility From Install DVD
Apr 2, 2012
My HDD died recently and I cannot get booted into OS X. It just hangs on the grey screen with the apple. I am (was) running 10.6.8
I am having a lot of trouble trying to boot from my install DVD. First of all I purchased a new HDD which came with Lion pre-installed on it. This worked fine, except when I tried to restore my latest time machine back up it used up 200GB of my disk space but nothing is restored? No doucments or music anywhere, photos, nothing. There is no change at all except half my storage has disappeared. I had posted another question on here and the reply said to use setup assistant, which I could not locate in Lion? I then tried to install Snow Leopard back over Lion but it would not let me. I tried to boot to the install disk but it just hung at the apple screen again.
I gave up and bought another brand new HDD but it won't recognise it on boot up. I just get a flashing folder with a ? in it. I tried to boot into the install DVD and again it wouldn't do it.
I then went back to my original HDD, and tried to boot to the install DVD from that (I hadn't tried this first off as my install disk was elsewhere and I purchased the Lion HDD as a stop gap measure) and it STILL wouldn't do it? This is now the original disk with the original install DVD (10.6) issued with my macbook pro when I purchased it and it will not boot to the DVD. Why why why?! It is almost enough to make me bin the lot and switch to windows.
Info:MacBookPro, Mac OS X (10.6.8)
View 8 Replies
ADVERTISEMENT
May 15, 2012
How do I launch disk utility from the Snow Leo install disk?
View 2 Replies
View Related
Jul 2, 2012
I recently upgraded my Macbook Pro to Snow leopard. About 4 days later, my Mac crashed. When I tried to restart, it came up with the grey screen with apple logo and spinning disc. I have tried all of the resets. I then decided to try and re-boot from the SL install disk. When it asked me to choose a destination volume, however, there was none available. I tried disk utility, but there was no disk available there either. I then went back and tried to use the original install disc that came with the Mac...same results. It appears that my internal hard disk has disappeared. I wonder if i am going to have to replace the hard drive?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
View 1 Replies
View Related
May 14, 2012
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
View 6 Replies
View Related
Jun 12, 2012
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 8, 2012
please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
View 2 Replies
View Related
Aug 15, 2009
1. To grab all the files I need/don't want to lose (photos, music, documents, etc.)2. Then completely erase the 500GB HD so I can then install it into the new Macbook Pro and install Leopard.(I'll then externally connect the 160GB HD that came w/ my Macbook Pro and add the files I've already copied into that 160GB HD into the 500GB Leopard installed HD in the new Macbook Pro)So, currently my 500GB HD is connected to my Macbook pro and I want to completely erase everything so I'll then have a completely clean hard drive, to then install into the Macbook Pro, add the installation discs and install Leopard into the 500GB HD.
View 14 Replies
View Related
May 30, 2012
My Macbook (late 2008 aluminum unibody running Snow Leopard 10.6.8) is having a plethora of problems - Spotlight won't return any results, I can't get any .dmg files to mount, and software updates can't be installed. Many of the solutions I've found involve running Disk Utility, but every time I try to open it, it crashes.
Here's the log file I get:
Process: Disk Utility [52987]
Path: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk
UtilityIdentifier: com.apple.
DiskUtilityVersion: 11.5.2 (298.4)
Build Info: DiskUtility-2980400~60
Code Type: X86-64 (Native)
[Lig] .....
Info:
Macbook 5.1, Mac OS X (10.6.2)
View 1 Replies
View Related
Feb 27, 2012
I often add very large files to my system before compressing them, sending them to clients, and then deleting them. This process leaves me constantly thinking about how much disk space I have free. Disk Utility, and an Apple approved app called DaisyDisk (space visualization) typically help me accompish this. Sadly, as of this week I seem to have a problem. When I went and looked the other day Disk U was telling me that 250gb of my 320gb drive is in use. This seemed high to me, but to be safe I thought I'd delete some files I didn't need. After deleting a bunch of videos, and a backup of my Main Identity (19gb) from my system, I'd assumed I had freed up about 24gb, but when I went back into Disk U it was still showing the same 250gb in use. Yes I rebooted my system, and made sure the trash was empty.
As I investigated further I did a get info on all 6 folders on the MacHD and they added up to about 170gb. That seemed more realistic, so I did a get info on my MacHD and again it showed the same thing 170 in use and 148.something available. Note: I have no partitions on this drive. But yet, still when I go to Disk U it seemed to be stuck at only 64gb free. Today when I went and looked again I am still seeing the same amount in use and free on the MacHD get info, but on Disk U now I am seeing 108 free and 211 in use. Why the difference? I would think Get Info was pulling from the same place as the mac disk utility.
Info:
MacBook Pro 15", Mac OS X (10.4.7)
View 11 Replies
View Related
Mar 27, 2012
I have used Disk Utility to attempt to password protect a folder but its not working for me. I go to FILE>NEW>DISK IMAGE FROM FOLDER I then highlight the folder I want to password protect and click the IMAGE button.In the window that pops up, I then select 128 bit encryption and leave image format on COMPRESSED.Then I enter and verify the password I want to place on the folder and hit OK.The resulting disk image appears to have been modified, but when I double click on the supposedly password secured folder, nothing happens. The folder doesn't open, nor does a window pop up asking for a password.I'm running snow leopard.Â
Info:
MacBook Pro, Mac OS X (10.6.8), 2.53Ghz Core Duo 500 GB HD
View 1 Replies
View Related
Apr 8, 2012
I've got an external har drive that i've been using for the last 6 months as my time machine back-up. I've used the disk utility in the past to create an image and password protect my drive that way. But.is there a way i can use the same process for a drive that already has content on it? Can i password protect my drive using the disk utility which will password any current content as well as any future content? Â
ps - im using 10.7.3
Info:
Mac OS X (10.7.3)
View 2 Replies
View Related
Jun 14, 2012
I want to run Disk utilities on my mac. Have done this before using system disk and holding C etc. Since upgrading to Snow Leopard from Leopard it no longer sees my system disk. Restart holding down C with system disk installed...and mac just boots-up normally! Ultimately I want to run the disk utility to check that the Hard Drive is healthy after install.
Info:
PowerMac, Mac OS X (10.6.8), 2x3 Ghz Dual-Core Intel Xeon
View 3 Replies
View Related
Jun 16, 2012
on doing a disk utilities scan it came up with this - "Problems were encountered during repair of the partition map" why won't it let me repair this problem?
Info:
MacBook Pro, Mac OS X (10.7.4)
View 3 Replies
View Related
Jun 13, 2012
I have been try to update the Airpor Utility on My snow Leoprad server on a mac mini..I keep getting the following error 6/13/12 9:05:16 AMInstaller[71395]The outer edges of the subview frames are supposed to line up with the split view's bounds' edges. NSSplitView is working around the problem, perhaps at the cost of more redrawing. (This message is only logged once per NSSplitView.)then 6/13/12 9:05:51 AMInstaller [71395] The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.I have repaired permissions checked the Hard rive an d now am sort of lost..I am not losing sleep ovetr it as I have been moving away from teh airports express due to it streaming issues.. but still I guess its OCD when I want o keep the server up to date
Info:
Mac mini, Mac OS X (10.6.8), server
View 1 Replies
View Related
Sep 4, 2009
I recently replaced Leopard 10.5 with a clean installation (not an upgrade) of Snow Leopard 10A432 (SL) on my Intel Core 2 Duo MacBook (aluminum, 2GB RAM). Under Leopard 10.5 I was able to use Disk Utility (DU) to dynamically re-size existing volumes on USB hard drives. But under SL I am unable to do so. While I am able to replace all existing partitions on a USB drive with a new set of partitions and resize them prior to their creation by dragging the slider bars, once created, DU will not let me dynamically resize the new partitions. Doing so was easy with DU under 10.5. For example, after I re-partitioned a USB drive with DU under SL and created 2 partitions, I was able to make the top partition smaller by dragging the bottom edge upward from the lower right corner, but there seems to be no way (and no slider bars) to adjust the size of the lower partition to use the space freed by having made the upper partition smaller. In fact, although the upper partition reports a smaller size, when clicked on, the border around the upper partition still includes the range defined by its initial, larger size. There also seems to be now way (no slider bars) at the top edge of partitions that would allow them to be expanded/contracted from the top down. Has anyone else encountered these issues? Any thoughts/suggestions as to how to resolve them? Are these known issues? I have searched but not come across it as yet.
View 5 Replies
View Related
Mar 10, 2012
So my Mac froze for some reason, while my Kingston thumb/flash drive was in. I tried to eject it, but I could only force eject (which it said may cause issues). After that, whenever I put the thumb drive in, it said something like the drive won't work and I had to copy the files to my desktop. When I go into disk utility and click repair disk, it says this: "Disk Utility stopped repairing “UNTITLED 1”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files." I can't erase the thumbdrive, because it says I need a source, which I don't know what that means.The files are useless now as I have transferred them to a CD, so I'm fine with erasing the whole thing.
Info:
Mac mini, Mac OS X (10.6.5)
View 12 Replies
View Related
Jun 15, 2012
I recently realized that I no longer have the Startup Disk preference pane in the Preference Panel. I sometimes boot from other drives and now I'm forced to hold down the option key at restart or startup instead of being able to select the startup drive through the Startup Disk pane.
MacMini 1.66 GHz Intel Core Duo
2GB 667 MHz DDR2 SDRAM
Mac OS X 10.6.8
Info:
Mac mini, Mac OS X (10.6.8)
View 4 Replies
View Related
Jun 24, 2012
In order to use Lion’s encrypted (Core Storage) external drive feature, I needed to reformat an external 1TB drive with Apple Partition Map, as that works only with GPT. The only partition was HFS+J formatted and was used as Time Machine Backup, which I wanted to preserve.Â
Act I:
I connected the drive to another iMac running 10.6 which happened to have enough space on the internal HD. I read this article http://support.apple.com/kb/HT5096 , which describes how to copy the BackupDB just by drag and drop. In hindsight, that was a bad idea, I should have created a disk image like suggested elsewhere, but if Apple itself suggests it, it can’t be so bad right?Â
So I just dragged the whole BackupDB to random folder on the iMac (after enabling ownership), and apparently it copied correctly the dir-hardlinks, as the resulting folder had the same size. Â
It seems that the Finder activates a special dir-hardlink aware copying mode when one does this. This is also confirmed by the fact that the Finder will refuse to copy the BackupDB together with other files, you have to drag and drop the BackupDB only.Â
Act II:
I reformatted the external drive as HFS+J with GPT and activated ownership.. But now, when I try to copy the BackupDB back, it continues to count indefinitely the number of files to copy! I speculate that the special dir-hardlink aware mode is not activated, but what can I do? How can I trigger it? Is there some hidden command line tool which handles this?Â
The lesson I’m drawing from this is: use the method described in the article only if you copy the backupDB from your old to your new drive.Â
Info:
Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 31, 2012
I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 9, 2012
I've been having trouble backing up my MacBook Pro to my Time Capsule (hasn't backed up in months) so I ran Disk Utility and it gave the following error: Disk Utility stopped verifying "Hard Disk". This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. So, if I do that, will I end up losing whatever is on my hard disk? And how do I start up the computer using the OS X disk? Just put it in and restart?
View 2 Replies
View Related
Jan 14, 2011
I am getting errors when I attempt to burn my back-up Snow Leopard .dmg in Toast 10 or Disk Utility. Is my superdrive faulty? Here are my error messages.
View 4 Replies
View Related
Nov 30, 2010
I work in an office where we've picked up a few new MBPs. These machines have Snow Leopard and I'd like to install it on my machine running Leopard. Is there any way that I can install 10.6 on my machine using the Disks that came with the new machines?
View 1 Replies
View Related
Sep 1, 2009
Does anyone know how many machines I am legally allowed to install 1 copy of snow leopard on?
What powers do apple have to trace 1 copy installed across multiple machines?
View 5 Replies
View Related
Jul 15, 2010
While upgrading from Tiger 10.4 to Snow Leopard 10.6 (Mac Box Set purchased from apple store) on my macbook pro the installation process froze up. Tried several times with same outcome. Even wiped the disk & reinstalled original software (tiger 10.4). No disk repairs necessary. So starting with a clean slate snow leopard still wont make it through the installation process.
View 2 Replies
View Related
Oct 27, 2010
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
View 3 Replies
View Related
Aug 28, 2009
this isn't an isolated issue - there are threads about this over at Apple and InsanelyMac: I'm unable to install Snow Leopard. When I run the installer, it'll tell me that "Mac OS X cannot be installed on "Macintosh HD", because this disk cannot be used to start up your computer" (Macintosh HD being my OS X volume, obviously). I'm seeing this issue on a relatively new 1.8ghz Macbook Air with a 128gb SSD - however, as far as I can tell from the other threads, the problem also affects iMacs and Macbooks.
Some people apparently attributed the issue to a PGP installation they had on their harddrive. Others found a file called backup.backupdb in their root - deleting it fixed the problem. However, most people don't have any of that installed on their computers and the upgrade still won't work. - if anyone has found a solution to the issue, please let me know :-( I'm stuck here. I don't have an external drive for the MBA and booting from a network drive has never worked on this particular machine - so I can't do a clean install, either.
View 16 Replies
View Related
Aug 28, 2009
I have a Macbook Pro with an inoperative slot-loading Superdrive. I purchased Snow Leopard today, planning to use my Mac Pro w/working Superdrive in Firewire Target Disk Mode to install the OS on my Macbook Pro. I can mount the Snow Leopard install via TDM, but the installer informs me that I cannot install Snow Leopard from "this volume" (presumably because the Target Disk Mode connection isn't recognized as an optical drive?). I've also tried to use "Remote Install OS X," but because my MBP is not an Air, it doesn't have the necessary firmware to select a network boot on startup by holding Option. Am I out of luck until I get access to a firewire external DVD drive?
View 7 Replies
View Related
Aug 29, 2009
I've been a long time lurker on these forums and you've helped me out numerous times when my computers decided to stop working.
I got my Snow Leopard disk in the post today but unfortunately my disk drive in my Macbook Pro seems to finally be well and truly knackered.
I should be able to borrow a usb/firewire disk drive from a friend, so would I be able to install ok from this external drive, and is there anything I would need to mess around with to make it work?
View 4 Replies
View Related
Mar 17, 2010
I have an early 08 MBP that shipped with Leopard. I upgraded it to Snow Leopard quite a long time ago. I feel like doing a clean reinstallation but my Leopard disk is spoilt.
Is it possible for me to do a brand new clean installation just using that Snow Leopard upgrade disk?
View 7 Replies
View Related
Feb 11, 2012
I am trying to upgrade from leopard to snow leopard on my MacBook Pro. However, every time I insert the install disk, the machine whirs for a moment, and then ejects the disk with no error message. I tested my drive with a different dvd and it works just fine. All of my other software is up to date.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.5.8)
View 4 Replies
View Related
