Desktops :: Cannot Start IMac Even With Original Install Disks
Oct 29, 2009
I have a 20" Intel based iMac (model A1224) running Snow Leopard. It is just over a year old and only had the original Apple keyboard and mouse plugged into it. Today when I tried to start it I got only a blank gray screen. I tried all the keyboard combo start-up suggestions in the Apple help screens, unplugging/replugging everything, and booting with the Original disk and the Snow Leopard disk. A couple of those attempts produced a minute of the gray apple logo screen, then back to blank. While the disks were in it did sound like it was trying to read them, but spit out the disks after about 5 minutes.
I was given this macbook by my boyfriend and wanted to erase all his data and stuff. I have the mac boxed set for snow leopard for this macbook but I am not sure where to begin, how to start from scratch.
I have a summer 2005 14" iBook G4 that I'd like to wipe and give to a friend, but I seem to have lost my install disks somewhere in one of my moves in the last 5 years. The Apple Store employee I talked to said I should make an appointment at the Genius Bar and they'll do a wipe and reinstall for me, but I'm not interested in putting much more money into this since I'm giving it to a friend as a favor (hers just died). Any suggestions for how to get a copy of the right OS and all the iLife software, too? It has Tiger, but I could put Leopard on it, if that's easier to get a hold of.
I got my Mac Mini from my moms friend (for free) so I don't have the disks that came with the computer, but I do have the Snow Leopard upgrade disk and the disks that came with the new MacBook Pro's if that helps. How would I go about doing a clean install on my Mac Mini?
I'm new here, but not new to the Mac world. I own an intel iMac and while I was attempting to restart it on Sunday night it went into a gray screen with the box asking me to shut and restart in several languages. I did and still get stuck on that page. I did a PRAM reset and that didn't work. So I used my start up disk to get to the disk utility and my HD is fine so I used an external drive to install the OS on it and reboot from and reinstalled from TimeMachine (only problem is the last time I backed up was 5 months ago)Again I checked my internal drive and everything seems okay, but I cannot reboot from it. BTW, I've OS 10.6.2,
I have a Macbook Pro Intel Core Duo (first generation of MacBook Pro released). I run OSX 10.6.5. My disk utility has detected a problem and says I need the install disks that came with the computer. Called apple and they said I could reboot from snow leopard or the upgrade.** Problem is that I don't have any disks with me except those that came with my brand new iMac. Can I use those to reinstall the system? Is there any other way?
**They also said that after 2007, the install disks that come with computers are keyed to that specific computer so I "might" not be able to use the disk to repair.
Additionally, and I don't know if this makes a difference but I have the airport/time capsule which backs up my computer for easy restore.
I have an iMac G5 iSight. When the power button is pressed there is no sound and a white light flashes, but nothing else happens. I tried the power reset method and replaced the power supply, but the same thing happens. The white light just keeps flashing.
My current MBP I bought new earlier in the year so has both software disks etc. Now, I bought an IMac second hand this week and I find the install disks are missing. I have bought a new copy of snow leopard but I am wondering if theres a way of installing just the iLife apps from the MBP disks onto my IMac?
My computer HD failed and I cant start my macbook at all. The computer boots and shows a question mark on a folder and the HD clicks so I assume thats the problem. I'm getting ready to order a new one and I can't find my original install disks. Can I do a fresh install of the OS on a new HD with just the Leopard install disk? I have a set of Mac Pro install disks, but don't know if they will work (missing divers?).
I have an older Power Mac G5 that I had problems with, and hoped I could get a little help.I wanted to start fresh, so I booted the Mac OSX software disk that came with the computer, and I was able to get my computer back to factory fresh (software-wise). After I reloaded the OSX (and did all of the software updates from Apple), I tried loading a program from an original installation CD/DVD. It would not load--it tried, but eventually ejected the disk. This happened over and over--I tried different types of discs (music CDs, DVDs, software), and the ONLY CDS/DVDs that work are the MAC OSX installation discs. I have tried using a DVD lense cleaner and compressed air.
I just purchased a used MacBook 5.2 with Apple care until Aug 2012. The previous owner doesn't however have any of the original installation disks but he does include a backup copy of Snow Leopard. Do I need the original installation disks or will the backup copy of snow Leopard suffice? *I don't know the difference between a backup version and original* And if I need them what are they and where do I get them?
I have an iMac g4 I have Adobe CS3 on it, and I want to transfer the applications to the new macbook pro I will be getting soon. Unfortunitely I "misplaced" the original disks so all I have is what is currently on my computer.
Is there any way to do this? I have an external hard drive and thought maybe I could some how get the apps on there and then put them on the macbook, but I don't know if that is realistic.
i just bought a macbook pro and i want to do a clean install but it didn't come with the install disks. is there a way to do it without buying new disks?
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
I have a G5 dual processor ((I think its a 2.5) running Tiger. I had it stored for several months and when I brought it out it won't start.. No response at all to pushing button..
Current status is...Cannot turn on, screen is dark. Blue light on power button stays on. Can't restart after holding it down...Red light inside box is on. Read that it might be air deflector trouble, but that's not it. Opened box removed plastic and returned it...another red light lit , then turned off. 1st red light stays on.
Before the above began, a restart would end up in a hang at the end of the progress bar. Ran Disk Util from Install CD which showed errors: "Volume Chk failed...HFS Volume needs repair". Ran FSCK whick said it fixed all. Ran Disk Warrior afterward b/c still would hang at startup. Says all now OK...but NOT! Have tried saving files thru Disk Warrior...but now, as per above, cannot get it to start up. Or turn off...
Would like to get it lit to save any additional files if drive is near the end...
[G5; 2GHz CPU speed; 6.5 GB RAM; Boot ROM version: 5.2.f1; Serial no. G8544RF6U
I recently got an 20' 2.4 GHz Intel Core 2 Duo Imac. It came with 1 gig of Ram. I purchased 2 2Gig SODIMM chips from New Egg. The ram specs matches what the little manual says. ddr2, pc2-5300 667MHz. When I install the new chips, the mac won't start. Period. No beeps, no nothing. I can sort of hear it try to start, then quits.
When I put back the original ram chip. Works again.When I have the original ram chip AND 1 of the new chips (for a total of 3 gigs of RAM) it works.Swapped one new chip with the other (as long as the original is in) Works.Original Chip is on the right side, New is on the left. Swapped places. Works.The mac will start ONLY if the original is in place. I should be able to start it with the nes ones in but it won't. I know both works because I swapped them.Anybody have any ideas on what's going on? Is there a setting somewhere I need to change or something?
I am using Mac 0S X Leopard, mac mini and facing the following problem:
1) System is taking too long time(10 - 15 min ) for start up and shut down. 2) It is asking every time to set up the current time as and when the system starts every time. 3) When accesing the system preferences , it gets crashed when using index Spotlight. 4) Finder gets relaunched itself for every 60-90 seconds when accessing folder Applications or Utilities etc.. 5) The Spotlight is indexing itself, When i tried to stop the indexing of the spotlight using system preference, it gets crashed.
My system got its logic board replaced by the apple once.
My Mac attempts to start up and automatically shuts down on it's own. It continues to start and stop for several minutes and finally boots up. Once it's up it works OK. I've had it in to the Mac store and they tell me it's probably the power supply, but after leaving it on all weekend it seemed to work OK so they didn't do anything. After I brought it home it is still acting in the same way. It's only on trying to start up that it cycles through the start - stop action. Once I turn it off it's the same problem on trying to start again. Does this sound like a power supply problem?
My MacBook 13", mid 2011, started to slow down, freeze. Tried to start up in safe mode, after that it just won't boot at all. Tried with the original DVD holding down "C" but no disk boot.
Each time I put in the installation disk for Office Mac 2008, my Macbook tries to read it, but will eject it within 15 seconds without allowing me to download. Is something wrong with my DVD drive? My Macbook is less than 1 year old. Not getting this at all!!
I purchased my MacBook in August 2006 and it came with 10.4.X and I have been fine with using that OS. However, just recently (august 08) my sister purchased another Macbook. Her Macbook came with the 10.5.4 install disks. I tried to put these into my macbook just to see if for some reason apple was nice enough to allow people who purchased new macbooks to update all other macbooks they owned. However, it does not appear to work that way. Is there any way I can get the 10.5.4 Install disks to work on my macbook (purchased august 06) that is currently running 10.4.11?
I recently purchased a new Mac Pro which came with iLife 09.My MBA came with iLife 08.I'd like to do a clean reinstall on my MBA and add the 09 apps.
First, what's on what DVD? Is the OS on one DVD and all the bundled apps on the other or is there a mix of apps on both DVD's?One potential snag is that I recall reading somewhere that the MP install of OSX includes optimizations/support for Nehalem... would this screw up my MBA or would it ignore that stuff?
Just heard that Mac's Install disks are machine specific. Is that really the case? If so, why? Coming from the PC world, I'm used to just putting the OS disk in the CD/DVD drive and take it from there. So, if I want to install a Mac OS on my machine not only do I have to obtain the OS, I also have to get the proper Install CD�s/DVD's or what? Please clear up the fog Mac experts.
my brother got a new macbook and im running a powerbook g4 still on tiger can i use his os install discs to upgrade to leopard? or will it wipe my computer clean and install it on a clean slate?
I'm trying to reinstall Mac OS X on my MBP using the original install disks. OS X was replaced by Ubuntu and now I'm trying to replace Ubuntu with OS X. When I insert the OS X CDs and try to boot from them, either by holding down the 'C' key or the option key and choosing the Mac OS X CD, the CD simply ejects, and then the computer proceeds to boot from the HD and into Ubuntu.
I have an intel mac (macbook) with a fresh (not upgraded) copy of Leo. Apparently this does matter, as Tiger would have been able to mount the disk with no problem so I suspect that ability remains in the computer when upgraded (only a suspicion). I have been trying for 3 days to get my Canon solutions disk (14.3) to mount in Leopard. When I insert it, it just spits back out after spinning up.
Canon support had no idea what to do, and apple wasn't giving me any help since it is a third party app, they simply sent me the direction of canon for a fix.
Thankfully I figured out a solution. This should work for all who have disks that will not mount and spit back out. As a last resort right before I pulled my hair out I decided to try and force the disk to mount by holding the shift key while inserting the Canon Solutions disk. IT WORKED!
Do not let go of that shift key until the disk is mounted completely and the installer icon is on the desktop. Once it is mounted you are good to go and it installs with no problem.
I hope this information can help some of you having this issue.
So after getting my new Macbook Pro 15 inch, I am giving my 3 year old black book to my brother and I wiped the HD for him. Just wondering if I can use the install disks from my new 15'' MBP to put leopard on his computer? The old disks contain tiger.
